Startseite Impact toughness of welds deposited on H13 hot work tool steel
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Impact toughness of welds deposited on H13 hot work tool steel

  • Matjaž Mulc , Andrej Skumavc , Boštjan Taljat und Janez Tušek
Veröffentlicht/Copyright: 11. August 2014
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 105 Heft 8

Abstract

This paper presents the experimental results of the impact toughness and hardness of welds deposited on H13 hot work tool steel. To obtain the optimum combination of high hardness and high toughness, multipass gas tungsten arc welding was used to melt four different commercially available filler materials suitable for repair welding of HWTS. Special geometry of the welding sample is presented in this work. The focus is also on the technique of the preparation of the V-shaped notch in order to precisely evaluate the impact toughness. Two different preheating temperatures and two different post weld heat treatments were applied to the samples in order to obtain the effect of heat treatment on the impact toughness and hardness. Data show that weld deposited with filler material C on the base of the hot work tool steel and alloyed with vanadium exhibits high impact toughness in combination with high hardness in the as-welded condition and also after tempering.

Keywords: Gas tungsten arc welding; Impact toughness; Hardness; Hot work tool steel; Weld heat treatment
* Correspondence address, Andrej Skumavc, University of Ljubljana, Faculty of Mechanical Engineering, Aškerčeva 6, 1000 Ljubljana, Slovenia, Tel: +386 1 4771 205, Fax: +386 1 4771 225, E-mail:

References

[1] S.Z.Qamar: J. Achievements Mater. Manuf. Eng.35 (2009) 115.Suche in Google Scholar

[2] M.Muhič, F.Kosel, A.Pukšič, D.Klobčar: Int. J. Mater. Res.102 (2011) 69.,. 10.3139/146.110444Suche in Google Scholar

[3] T.R.Vijayaram: Indian Foundry J.57 (2011) 25.Suche in Google Scholar

[4] www.uddeholm.com/files/TB_welding-english.pdf: Welding of tool steel, available on 25.1.2013.Suche in Google Scholar

[5] G.Roberts, G.Krauss, R.Kennedy: Tool Steels, ASM International, Materials Park, Ohio (1998).10.31399/asm.tb.ts5.9781627083584Suche in Google Scholar

[6] S.Z.Qamar, R.A.Siddiqui, T.Pervez: Trends in Development of Machinery and Associated Technology, Hammamet, Tunisia, October 2009.Suche in Google Scholar

[7] K.Venkatestan, R.Shivpuri: J. Mater. Eng. Perform.4 (1995) 166. 10.1007/BF02664110Suche in Google Scholar

[8] R.Shivpuri, M.Yu, K.Venkatesan, Y.Chu: J. Mater. Eng. Perform.4 (1995) 145. 10.1007/BF02664107Suche in Google Scholar

[9] R.Shivpuri, M.Yu, K.Venkatesan, J.Conrad, K.Sridharan, M.Shamim, R.Fetherston: Wear192 (1996) 49. 10.1016/0043-1648(95)06749-3Suche in Google Scholar

[10] K.E.Tentardini, A.O.Augusto, C.Aguzzoli, M.Castro, J.J.Moore, I.J.R.Baumvol: Surf. Coat. Technol.202 (2008) 3764.,. 10.1016/j.surfcoat.2008.01.019Suche in Google Scholar

[11] M.Gojić, L.Vrsalović, S.Kožuh, A.C.Kneissl, I.Anžel, S.Gudić, B.Kosec, M.Kliškić: J. Alloys Compd.509 (2011) 9782. 10.1016/j.jallcom.2011.07.107Suche in Google Scholar

[12] A.Srivastava, V.Joshi, R.Shivpuri: Wear256 (2004) 38. 10.1016/S0043-1648(03)00281-3Suche in Google Scholar

[13] Y.Guanghua, H.Xinmin, W.Yanqing, Q.Xingguo, Y.Ming, C.Zuoming, J.Kang: Met. Sci. Heat Treat.52 (2010) 393. 10.1007/s11041-010-9288-4Suche in Google Scholar

[14] B.Kosec, G.Kosec, M.Soković: Int. Scientific J.28 (2007) 182.Suche in Google Scholar

[15] M.Fazarinc, T.Muhič, A.Šalej, D.Bombač, P.Fajfar, M.Terčelj, G.Kungler: Procedia Eng.10 (2011) 692. 10.1016/j.proeng.2011.04.115Suche in Google Scholar

[16] J.Tušek, B.Taljat, D.Klobčar: Metalurgija46 (2007) 67.Suche in Google Scholar

[17] Z.Wenhua: China Building Mat. Equipment2 (1999) 26.Suche in Google Scholar

[18] H.Jasperson: Proceedings of 5th International Conference on Tooling, Leoben, Austria (1999) 93.Suche in Google Scholar

[19] R.Ebner, H.Leitner, F.Jeglitsch, D.Caliskanoglu: Proceedings of 5th International Conference on Tooling, Leoben, Austria1999, 3.Suche in Google Scholar

[20] V.Leskovšek, B.Šuštaršič, G.Jutriša: J. Mater. Process. Technol.178 (2006) 328. 10.1016/j.jmatprotec.2006.04.016Suche in Google Scholar

[21] K.-D.Fuchs: Presentation: Influence of heat treatment parameters on the properties of common hot-work tool steels, Deutsche Edelstahlwerke, (year unknown).Suche in Google Scholar

[22] H.Jesperson: Mater. Eng. - Mater. Inz. (MEMI)20 (2013) 94.Suche in Google Scholar

[23] D.Klobčar, J.Tušek, B.Taljat, L.Kosec, M.Muhič: Int. J. Mater. Res.99 (2008) 1006. 10.3139/146.101733Suche in Google Scholar

[24] Metallic materials, Charpy pendulum impact test, Part 1 “Test method”, SIST EN ISO148–1:2010.Suche in Google Scholar

[25] D.Seferijan: Metalurgija zavarivanja (translated from original: Metallurgie de la soudure), GraÐevinska knjiga Beograd (1969).Suche in Google Scholar

[26] I.Hrivňák: Theory of weldability of metals and alloys, Elsevier (1992).Suche in Google Scholar

[27] C.Højerslev: Tool steels, Risø National Laboratory (2001).Suche in Google Scholar

Received: 2013-08-28
Accepted: 2014-02-20
Published Online: 2014-08-11
Published in Print: 2014-08-11

© 2014, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111086
Schlagwörter für diesen Artikel
Gas tungsten arc welding; Impact toughness; Hardness; Hot work tool steel; Weld heat treatment

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 7.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111086/html
Button zum nach oben scrollen