Home Crystalline boron carbide grown on a diamond surface
Article
Licensed
Unlicensed Requires Authentication

Crystalline boron carbide grown on a diamond surface

  • Baoyan Liang , Yanzhi Wang , Wangxi Zhang , Shuliang Zhang and Jialin Liu
Published/Copyright: August 11, 2014
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 8

Abstract

Crystalline B4C was grown on the surface of diamond granules using a solid phase reaction from Ti – B – diamond raw materials. A series of analysis techniques, including X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry, were employed to investigate the as-grown B4C grains. The grown B4C grains had lengths of several micrometers. A mechanism for B4C coating formation on diamond particle is discussed.

Keywords: Growth; Boron carbide; Diamond
* Correspondence address, Dr. Baoyan Liang, Materials & Chemical Engineering School, Zhongyuan University of Technology, NO. 41, Zhongyuanzhong Road, Zhengzhou, 450007, China, Tel.: +86 371 69975740, Fax: +86 371 69975740, E-mail:

References

[1] U.Kuhlmann, H.Werheit: Solid State Comm.83 (1992) 849. 10.1016/0038-1098(92)90898-JSearch in Google Scholar

[2] U.Kuhlmann, H.Werheit, K.A.Schwetz: J. Alloys Compd.189 (1992) 249. 10.1016/0925-8388(92)90716-MSearch in Google Scholar

[3] C.X.Liu, J.L.Sun: Ceram. Int.36 (2010) 1297. 10.1016/j.ceramint.2009.12.024Search in Google Scholar

[4] J.B.Zang, A.W.Li, Y.H.Wang, H.Huang: Diamond Abras. Eng.6 (2003) 22.Search in Google Scholar

[5] T.R.Anthony: Diamond Relat. Mater.4 (1995) 1346. 10.1016/0925-9635(95)00317-7Search in Google Scholar

[6] F.Cardarelli: Materials Handbook: A Concise Desktop Reference, 2nd Ed., Springer (2008).Search in Google Scholar

[7] A.H.Ras, F.D.Auret, J.M.Nel: Diamond Relat. Mater.19 (2010) 1411. 10.1016/j.diamond.2010.08.013Search in Google Scholar

[8] Z.A.Munir, U.Anselmi-Tamburini: Mater. Sci. Rep.3 (1989) 277. 10.1016/0920-2307(89)90001-7Search in Google Scholar

[9] A.G.Merzhanov: J. Mater. Proc. Technol.56 (1996) 222. 10.1016/0924-0136(95)01837-9Search in Google Scholar

[10] D.L.Ye. J.H.Hu: Practical Handbook of the Thermodynamic Data, Metallurgical Industry Press, Beijing (2002).Search in Google Scholar

[11] J.C.Slater: J. Chem. Phys.41 (1964) 3199. 10.1063/1.1725697Search in Google Scholar

Received: 2014-01-23
Accepted: 2014-04-11
Published Online: 2014-08-11
Published in Print: 2014-08-11

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111091
Keywords for this article
Growth; Boron carbide; Diamond

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 7.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111091/html
Scroll to top button