Home Technology Industrialised nanocrystalline bainitic steels. Design approach
Article
Licensed
Unlicensed Requires Authentication

Industrialised nanocrystalline bainitic steels. Design approach

  • Carlos Garcia-Mateo , Francisca G. Caballero , Thomas Sourmail , Veronique Smanio and Carlos Garcia de Andres
Published/Copyright: August 11, 2014
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 8

Abstract

Nanostructured microstructures consisting of a mixture of very thin plates of bainitic ferrite separated by C-enriched austenite are the main characteristics of the so called NANOBAIN steel family. This paper shows the theoretical approach followed in the design of a new, industrially viable, generation of NANOBAIN steels, a process in which industrial demands such as simpler chemical compositions, faster transformation kinetics and sufficient hardenability have also been considered. The microstructural and mechanical characterization of the bainitic microstructures obtained by isothermal transformation at different temperatures, come to confirm and to validate the theoretical approach used.

Keywords: Nanostructured; Bainite; Thermodynamic theory; Diffusionless
* Correspondence address, Dr. Carlos Garcia-Mateo, National Center for Metallurgical Research (CENIM-CSIC), Avda. Gregorio del Amo 8, Madrid E-28040, Spain, Fax: +34 91 534 74 25, E-mail:

References

[1] F.G.Caballero, H.K.D.H.Bhadeshia, K.J.A.Mawella, D.G.Jones, P.Brown: Mater. Sci. Technol.18 (2002) 279. 10.1179/026708301225000725Search in Google Scholar

[2] C.Garcia-Mateo, F.G.Caballero, H.K.D.H.Bhadeshia: ISIJ Int.43 (2003) 1238. 10.2355/isijinternational.43.1238Search in Google Scholar

[3] C.Garcia-Mateo, F.G.Caballero, H.K.D.H.Bhadeshia: ISIJ Int.43 (2003) 1821. 10.2355/isijinternational.43.1238Search in Google Scholar

[4] H.I.Aaronson, H.A.Domian, G.M.Pound: Trans. Metall. AIME236 (1966) 781.Search in Google Scholar

[5] T.Sourmail, V.Smanio: Metall. Mater. Trans. A44 (2013) 1975. 10.1007/s11661-013-1656-4Search in Google Scholar

[6] C.Garcia-Mateo, F.G.Caballero: ISIJ Int.45 (2005) 1736. 10.2355/isijinternational.45.1736Search in Google Scholar

[7] C.Garcia-Mateo, F.G.Caballero: Int. J. Mater. Res.98 (2007) 137. 10.3139/146.101440Search in Google Scholar

[8] H.K.D.H.Bhadeshia, D.V.Edmonds: Metall. Trans. A10 (1979) 895. 10.1007/BF02658309Search in Google Scholar

[9] B.P.J.Sandvik: Metall. Trans. A13 (1982) 777. 10.1007/BF02642391Search in Google Scholar

[10] H.K.D.H.Bhadeshia, D.V.Edmonds: Acta Metall.28 (1980) 1265. 10.1016/0001-6160(80)90082-6Search in Google Scholar

[11] H.K.D.H.Bhadeshia: Acta Metall.29 (1981) 1117. 10.1016/0001-6160(81)90063-8Search in Google Scholar

[12] I.Stark, G.D.W.Smith, H.K.D.H.Bhadeshia: Metall. Trans. A21 (1990) 837. 10.1007/BF02656567Search in Google Scholar

[13] K.Tsuzaki, A.Kodai, T.Maki: Metall. Mater. Trans. A25 (1994) 2009. 10.1007/BF02649049Search in Google Scholar

[14] B.Josefsson, H.O.Andren: Mater. Sci. Technol.7 (1991) 849. 10.1179/026708391790185013Search in Google Scholar

[15] F.G.Caballero, C.Garcia-Mateo, M.J.Santofimia, M.K.Miller, C.García de Andrés: Acta Mater.57 (2009) 8. 10.1016/j.actamat.2008.08.041Search in Google Scholar

[16] F.G.Caballero, M.K.Miller, C.Garcia-Mateo: Acta Mater.58 (2010) 2338. 10.1016/j.actamat.2009.12.020Search in Google Scholar

[17] F.G.Caballero, H.W.Yen, M.K.Miller, J.R.Yang, J.Cornide, C.Garcia-Mateo: Acta Mater.59 (2011) 6117. 10.1016/j.actamat.2011.06.024Search in Google Scholar

[18] H.K.D.H.Bhadeshia, A.R.Waugh: Acta Metall.30 (1982) 775. 10.1016/0001-6160(82)90075-XSearch in Google Scholar

[19] H.K.D.H.Bhadeshia: Bainite in Steels. Transformations, Microstructure and Properties, Institute of Materials, Minerals and Mining, London (2001).Search in Google Scholar

[20] C.Garcia-Mateo, H.K.D.H.Bhadeshia: Mater. Sci. Eng. A378 (2004) 289. 10.1016/j.msea.2003.10.355Search in Google Scholar

[21] G.B.Olson, M.Cohen: Metall. Trans. A7 (1976) 1897. 10.1007/BF02654987Search in Google Scholar

[22] G.Ghosh, G.B.Olson: Acta Metall. Mater.42 (1994) 3361. 10.1016/0956-7151(94)90468-5Search in Google Scholar

[23] F.Hu, K.Wu: Adv. Mater. Res.146–147 (2011) 1843.Search in Google Scholar

[24] H.K.D.H.Bhadeshia: Met. Sci.16 (1982) 159. 10.1179/030634582790427217Search in Google Scholar

[25] J.L.Lee, H.K.D.H.Bhadeshia: Mater. Sci. Eng. A171 (1993) 223. 10.1016/0921-5093(93)90409-8Search in Google Scholar

[26] M.J.Peet, H.K.D.H.Bhadeshia: Metall. Mater. Trans. A42 (2011) 3344. 10.1007/s11661-011-0755-3Search in Google Scholar

[27] E.Swallow, H.K.D.H.Bhadeshia: Mater. Sci. Technol.12 (1996) 121. 10.1179/026708396790165614Search in Google Scholar

[28] M.K.Fondekar, A.M.Rao, A.K.Mallik: Metall. Trans.A1 (1970) 885.Search in Google Scholar

[29] M.Takahashi, H.K.D.H.Bhadeshia: Mater. Sci. Technol.6 (1990) 592. 10.1179/026708390790191521Search in Google Scholar

[30] M.Nemoto: High Voltage Electron Microscopy, Academic Press, New York NY (1974).Search in Google Scholar

[31] S.B.Singh, H.K.D.H.Bhadeshia: Mater. Sci. Eng. A245 (1998) 72. 10.1016/S0921-5093(97)00701-6Search in Google Scholar

[32] J.Cornide, C.Garcia-Mateo, C.Capdevila, F.G.Caballero: J. Alloys Compd.577, Supplement 1 (2013) S43. 10.1016/j.jallcom.2011.11.066Search in Google Scholar

[33] E.Kozeschnik, H.K.D.H.Bhadeshia: Mater. Sci. Technol.24 (2008) 343. 10.1179/174328408X275973Search in Google Scholar

[34] F.G.Caballero, M.K.Miller, S.S.Babu, C.Garcia-Mateo: Acta Mater.55 (2007) 381. 10.1016/j.actamat.2006.08.033Search in Google Scholar

[35] F.G.Caballero, M.K.Miller, C.Garcia-Mateo, C.Capdevila, S.S.Babu: Acta Mater.56 (2008) 188. 10.1016/j.actamat.2007.09.018Search in Google Scholar

[36] F.G.Caballero, M.K.Miller, C.Garcia-Mateo: Metall. Mater. Trans. A42 (2011) 3660. 10.1007/s11661-011-0699-7Search in Google Scholar

[37] H.J.Stone, M.J.Peet, H.K.D.H.Bhadeshia, P.J.Withers, S.S.Babu, E.D.Specht: Proc. R. Soc. A464 (2008) 1009. 10.1098/rspa.2007.0201Search in Google Scholar

[38] C.Garcia-Mateo, F.G.Caballero, M.K.Miller, J.A.Jimenez: J. Mater. Sci.47 (2012) 1004. 10.1007/s10853-011-5880-2Search in Google Scholar

[39] H.K.D.H.Bhadeshia, D.V.Edmonds: Met. Sci.17 (1983) 411. 10.1016/0036-9748(83)90183-7Search in Google Scholar

[40] B.P.J.Sandvik, H.P.Navalainen: Met. Technol.8 (1981) 213. 10.1179/030716981803275992Search in Google Scholar

[41] P.J.Jacques, E.Girault, A.Mertens, B.Verlinden, J.Van Humbeeck, F.Delannay: ISIJ Int.41 (2001) 1068. 10.2355/isijinternational.41.1061Search in Google Scholar

[42] K.Nohara, Y.Ono, N.Ohashi: Tetsu To Hagane-J. ISIJ63 (1977) 212.Search in Google Scholar

[43] M.Y.Sherif, C.Garcia-Mateo, T.Sourmail, H.K.D.H.Bhadeshia: Mater. Sci. Technol.20 (2004) 319. 10.1179/026708304225011180Search in Google Scholar

[44] C.A.N.Lanzillotto, F.B.Pickering: Met. Sci.16 (1982) 371. 10.1016/0036-9748(82)90153-3Search in Google Scholar

[45] N.K.Balliger, T.Gladman: Met. Sci.15 (1981) 95. 10.1016/0036-9748(81)90144-7Search in Google Scholar

[46] NPL, MTDATA, Software, National Physical Laboratory, Teddington, U.K. (2006).Search in Google Scholar

[47] K.J.Irvine, T.Gladman, F.B.Pickerin: J. Iron Steel Inst.207 (1969) 1017.Search in Google Scholar

[48] C.H.Young, H.K.D.H.Bhadeshia: Mater. Sci. Technol.10 (1994) 209. 10.1179/026708394790163663Search in Google Scholar

[49] T.Gladman: The physical metallurgy of microalloyed steels, Institute of Materials, London (1997).Search in Google Scholar

[50] L.C.Chang, H.K.D.H.Bhadeshia: Mater. Sci. Technol.11 (1995) 874. 10.1179/026708395790165462Search in Google Scholar

[51] C.Garcia-Mateo, F.G.Caballero, J.Chao, C.Capdevila, C.Garcia de Andres: J. Mater. Sci.44 (2009) 4617. 10.1007/s10853-009-3704-4Search in Google Scholar

[52] F.G.Caballero, C.García-Mateo, J.Chao, M.J.Santofimia, C.Capdevila, C.G.De Andrés: ISIJ Int.48 (2008) 1256. 10.2355/isijinternational.48.1256Search in Google Scholar

Received: 2014-01-21
Accepted: 2014-03-05
Published Online: 2014-08-11
Published in Print: 2014-08-11

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111090
Keywords for this article
Nanostructured; Bainite; Thermodynamic theory; Diffusionless

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 23.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111090/html
Scroll to top button