Home Technology Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
Article
Licensed
Unlicensed Requires Authentication

Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites

  • Chao Yu , Hongxi Zhu , Wenjie Yuan , Chengji Deng and Shimin Zhou
Published/Copyright: August 11, 2014
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 8

Abstract

Al4SiC4 – Al – Si composites were synthesized using a mixture of calcined bauxite, silicon carbide and carbon black as the starting materials. Al4SiC4 began to form at >1 600 °C and Al and Si were identified at 1 800 °C. Al and Si formed only when silicon carbide was in excess of the amount of SiC necessary to form Al4SiC4. The synthesized powders consisted of irregular plate-like crystals and the surfaces were molten-like. The oxidation characteristics of Al4SiC4 – Al – Si composites as antioxidants were better than the oxidation characteristics of pure Al4SiC4, since their action took place mainly at 400 – 700 °C (Al – Si) and above 850 °C (Al4SiC4).

Keywords: Aluminum silicon carbide; Alloy; Antioxidant; Oxidation; Synthesis
* Correspondence address, Prof. Dr. Chengji Deng, The State Key Laboratory Breeding Base of Refractories and Ceramics, Wuhan University of Science and Technology, NO. 973, Heping Road, Wuhan 430081, P. R. China, Tel: +86-27-68862041, Fax: +86-27-68862085, E-mail:

References

[1] H.Kyoden, H.Nishio, K.Ito, S.Horita: Taikabutsu38 (1986) 242–250.Search in Google Scholar

[2] A.Yamaguchi: Taikabutsu38 (1986) 506–512.Search in Google Scholar

[3] A.Watanabe, H.Takahashi, S.Takanaga: Taikabutsu38 (1986) 740–746.Search in Google Scholar

[4] S.W.Zhang, A.Yamaguchi: J. Ceram. Soc. Jpn.103 (1995) 235–239. 10.2109/jcersj.103.235Search in Google Scholar

[5] S.W.Zhang, W.E.Lee: J. Eur. Ceram. Soc.21 (2001) 2393–2405. 10.1016/S0955-2219(01)00208-4Search in Google Scholar

[6] Y.Naruse, S.Fujimoto, Y.Kamata, M.Abe: Taikabutsu3 (2) (1983) 3–7.Search in Google Scholar

[7] L.L.Oden, R.A.Mccune: Metall. Trans. A18 (1987) 2005–2014. 10.1007/BF02647073Search in Google Scholar

[8] G.W.Wen, X.X.Huang: J. Eur. Ceram. Soc.26 (2006) 1281–1286. 10.1016/j.jeurceramsoc.2004.12.032Search in Google Scholar

[9] K.Inoue, A.Yamaguchi: J. Am. Ceram. Soc.86 (2003) 1028–1030. 10.1111/j.1151-2916.2003.tb03414.xSearch in Google Scholar

[10] O.Yamamoto, M.Ohtani, T.Sasamoto: J. Mater. Res.17 (2002) 774–778. 10.1557/JMR.2002.0113Search in Google Scholar

[11] C.J.Deng, T.Li, C.Bai, G.Z.Gu: Refractories39 (2005) 246–248.Search in Google Scholar

[12] J.L.Zhao, W.Lin, A.Yamaguchi, J.Ommyoji, J.Sun: J. Ceram. Soc. Jpn.115 (2007) 761–766. 10.2109/jcersj2.115.761Search in Google Scholar

[13] J.S.Lee, S.H.Lee, T.Nishimura, H.Tanaka: J. Am. Ceram. Soc.92 (2009) 1030–1035. 10.1111/j.1551-2916.2009.03056.xSearch in Google Scholar

[14] L.Li, S.F.Wang, S.B.Chen: Mater. Sci. Forum686 (2011) 671–77. 10.4028/www.scientific.net/MSF.686.671Search in Google Scholar

[15] A.P.Luz, M.M.Miglioli, T.M.Souza, S.Hashimoto, S.W.Zhang, V.C.Pandolfelli: Ceram. Int.38 (2012) 3791–3800. 10.1016/j.ceramint.2012.01.027Search in Google Scholar

[16] A.Watanabe, T.Matsuki, H.Takahashi, M.Takahashi, in: Proc. of 1st Int. Conf. Ref., Tokyo (1983) 125–134.Search in Google Scholar

[17] S.Hanagiri, T.Harada, S.Fugihara: Taikabutsu Overseas13 (1993) 20–27.Search in Google Scholar

[18] X.Li, M.Rigaud, in: 96 Int. Symp. Ref., Haikou, China, International Academic Publishers (1996) 514–520.Search in Google Scholar

[19] C.Yu, W.J.Yuan, C.J.Deng, H.X.Zhu, J.Li: Powder Technol.247 (2013) 76–80. 10.1016/j.powtec.2013.07.004Search in Google Scholar

[20] C.Yu, H.X.Zhu, W.J.Yuan, C.J.Deng, P.Cui, S.M.Zhou: J. Alloy. Compd.579 (2013) 348–354. 10.1016/j.jallcom.2013.06.088Search in Google Scholar

[21] D.T.Stevenson: Lights Metals, TMSWarrendale, PA (1984) 1571–1579.Search in Google Scholar

[22] M.J.Bruno: Light Metals, TMS Warrendale, PA (1984) 1613–1631.Search in Google Scholar

[23] NIST-JANAF: Thermochemical Tables Fourth Edition, J. Phys. Chem. Ref. Data, Monograph No. 9, National Institute of Standards and Technology, Gaithersburg, MD 20899-0001.Search in Google Scholar

[24] J.M.Lihrmann, J.Tirlocq, P.Descamps, F.Cambier: J. Eur. Ceram. Soc.19 (1999) 2781–2787. 10.1016/S0955-2219(99)00072-2Search in Google Scholar

[25] H.Yokokawa, M.Fujishige, S.Ujii, M.Dohiya: Metall. Trans. B18 (1987) 433–444. 10.1007/BF02656164Search in Google Scholar

[26] D.T.Stevenson, R.L.Troup: US Patent 4,491,472 (1985).Search in Google Scholar

[27] C.H.Jung, M.J.Lee, C.J.Kim: Mater. Lett.58 (2004) 609–14. 10.1016/S0167-577X(03)00579-2Search in Google Scholar

[28] D.Walter, W.Karyasa: J. Chin. Chem. Soc.52 (2005) 873–76. 10.1002/jccs.200500122Search in Google Scholar

[29] A.Yamaguchi, S.W.Zhang: J. Ceram. Soc. Jpn.103 (1) (1995) 20–24. 10.2109/jcersj.103.20Search in Google Scholar

Received: 2013-10-14
Accepted: 2014-02-17
Published Online: 2014-08-11
Published in Print: 2014-08-11

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
https://doi.org/10.3139/146.111083
Keywords for this article
Aluminum silicon carbide; Alloy; Antioxidant; Oxidation; Synthesis

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Microstructure evolution at high temperature of chromium-rich iron-based alloys containing hafnium carbides
  5. Industrialised nanocrystalline bainitic steels. Design approach
  6. Impact toughness of welds deposited on H13 hot work tool steel
  7. Characterization of hot flow behaviour and deformation stability of medium carbon microalloyed steel using artificial neural networks and dynamic material model
  8. Influence of hot working on mechanical and physical properties of an Fe – Ni – Co alloy
  9. Thixo-joining of D2 and M2 tool steels: analysis of microstructure and mechanical properties
  10. Effect of Li addition on microstructure and mechanical properties of Al – Mg – Si alloy
  11. Investigation of the mechanochemical behavior of the Mg – TiO2 – H3BO3 system
  12. Tribological and micro/nano-structural characterization of some Fe-based sintered composites
  13. Synthesis and oxidation behavior of Al4SiC4 – Al – Si composites
  14. Copper-catalyzed electroless nickel coating on poly(ethylene terephthalate) board for electromagnetic application
  15. Effect of boron on wear and erosion of WC – Ni vacuum brazed coating
  16. Short Communications
  17. Crystalline boron carbide grown on a diamond surface
  18. People
  19. Prof. Dr. Dieter Herlach on the occasion of his 65th birthday
  20. DGM News
  21. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 21.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111083/html
Scroll to top button