Startseite Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy

  • J. T. Guo , Y. X. Tian , L. Y. Sheng , L. Z. Zhou und H. Q. Ye
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 99 Heft 11

Abstract

In this paper, the effects of Sn and Hf additions on microstructures and room temperature mechanical properties of Nb-20Ti-5Cr-3Al-18Si alloy were investigated. The Sn addition has no significant effect on the microstructure of the alloy. Sn is preferentially partitioned in (Nb, Ti)ss rather than (Nb, Ti)5Si3. The addition of Sn decreases the solubility of Cr in (Nb, Ti)ss. The addition of Hf causes coarsening of the eutectic structure of (Nb, Ti)ss and (Nb, Ti)5Si3 and the formation of the Hf-rich γ(Nb, Ti)5Si3 along phase boundaries. With the addition of Sn the strength of the alloy decreases, while its ductility increases slightly. The Hf addition simultaneously improves strength and ductility of the alloy. The relationships between composition, microstructure and properties are discussed.

Keywords: Intermetallics; Microstructure; Mechanical properties
* Correspondence address, Prof. Jianting Guo, Superalloy Division, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China, Tel.: +86 24 2397 1917, Fax: +86 24 8397 8045, E-mail:

References

[1] T.B.Massalski, H.Okamoto, P.R.Subramanian, L.Kacprzak: Binary Alloy Phase Diagrams, ASM, Metals Park, Ohio, 1992.Suche in Google Scholar

[2] R.Radhakrishnan, S.Bhanduri, C.H.HenagerJr: JOM49 (1997) 41.Suche in Google Scholar

[3] M.R.Jackson, B.P.Bewlay, R.G.Rowe, D.W.Skelly, H.A.Lipsitt: JOM48 (1996) 39.Suche in Google Scholar

[4] M.G.Mendiratta, D.M.Dimiduk: Metall. Trans. A24 (1993) 501.Suche in Google Scholar

[5] P.R.Subramanian, M.G.Mendiratta, D.M.Dimiduk: JOM48 (1996) 33.Suche in Google Scholar

[6] P.R.Subramanian, M.G.Mendiratta, D.M.Dimiduk, M.A.Stucke: Mater. Sci. Eng. A239 (1997) 1.Suche in Google Scholar

[7] B.P.Bewlay, M.R.Jackson, H.A.Lipsitt: Metall. Mater. Trans. A27 (1996) 3801.Suche in Google Scholar

[8] M.G.Mendiratta, J.J.Lewandowski, D.M.Dimiduk: Metall. Trans. A22 (1991) 1573.Suche in Google Scholar

[9] J.D.Rigney, P.M.Singh, J.J.Lewandowski: JOM44 (1992) 36.Suche in Google Scholar

[10] M.Y.He, A.G.Evans: Acta Metal. Mater.41 (1993) 1223.Suche in Google Scholar

[11] R.Gnanamoorthy, S.Hanada: Scripta. Mater.34 (1997) 999.Suche in Google Scholar

[12] M.F.Ashby, F.J.Blunt, M.Bannister: Acta Metall. Mater.37 (1989) 1847.Suche in Google Scholar

[13] J.Kajuch, J.Short, J.J.Lewandowski: Acta Metall. Mater.43 (1995) 1955.Suche in Google Scholar

[14] B.P.Bewlay, M.R.Jackson, J.-C.Zhao, P.R.Subramanian, M.G.Mendiratta, J.J.Lewandowski: MRS Bulletin28 (2003) 646.Suche in Google Scholar

[15] B.P.Bewlay, J.J.Lewandowski, M.R.Jackson: JOM60 (1997) 44.Suche in Google Scholar

[16] B.P.Bewlay, M.R.Jackson, J.-C.Zhao, P.R.Subramanian: Metall. Mater. Trans. A34 (2003) 2043.Suche in Google Scholar

[17] K.S.Chan, D.Davidson: Metall. Mater. Trans. A30 (1999) 925.Suche in Google Scholar

[18] K.S.Chan: Metall. Mater. Trans. A32 (2001) 2475.10.1007/s11661-001-0037-6Suche in Google Scholar

[19] K.Chattopadhyay, G.Balachandran, R.Mitra, K.K.Ray: Intermetallics14 (12) (2006) 1452.10.1016/j.intermet.2006.01.054Suche in Google Scholar

[20] J.D.Rigney, J.J.Lewandowski: Metall. Mater. Trans. A27 (1996) 3292.Suche in Google Scholar

[21] P.Zheng, J.B.Sha, D.M.Liu, S.K.Gong, H.B.Xu: Mater. Sci. Eng. A, in press.Suche in Google Scholar

[22] K.S.Chan: Mater. Sci. Eng. A329 (2002) 513.10.1061/(ASCE)0733-9364(2002)128:6(513)Suche in Google Scholar

[23] K.S.Chan, D.Davidson: Metall. Mater. Trans. A34 (2003) 1833.Suche in Google Scholar

Received: 2007-11-6
Accepted: 2008-7-11
Published Online: 2013-06-11
Published in Print: 2008-11-01

© 2008, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. A model to calculate the viscosity of silicate melts
  5. A model to calculate the viscosity of silicate melts
  6. A note on the application of the phase rule
  7. Thermodynamic properties of liquid silver–indium–tin alloys determined from emf measurements
  8. Unconstrained solidification and characterisation of near-eutectic Al–Cu–Ag alloys
  9. Tensile properties of L12 intermetallic foils fabricated by cold rolling
  10. Microstructural control of FeB-inoculated mottled low-alloy white iron by a design of experiments approach
  11. Applied
  12. Dislocation structure and crystallite size distribution in lath martensite determined by X-ray diffraction peak profile analysis
  13. Effect of minor addition of Pb upon interfacial reactions and mechanical properties at Sn-3.0Ag-0.5Cu/Cu and Sn-58Bi/Cu solder joints
  14. Elastic properties of braided ceramic matrix composites
  15. The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
  16. Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy
  17. The effect of alloying elements on constrained carbon equilibrium due to a quench and partition process
  18. Hardfacing behavior of Cr–Ni stainless steel with Co-based super alloys
  19. Development of SMD 32.768 kHz tuning fork-type crystals
  20. Notification
  21. DGM News
https://doi.org/10.3139/146.101763
Schlagwörter für diesen Artikel
Intermetallics; Microstructure; Mechanical properties

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. A model to calculate the viscosity of silicate melts
  5. A model to calculate the viscosity of silicate melts
  6. A note on the application of the phase rule
  7. Thermodynamic properties of liquid silver–indium–tin alloys determined from emf measurements
  8. Unconstrained solidification and characterisation of near-eutectic Al–Cu–Ag alloys
  9. Tensile properties of L12 intermetallic foils fabricated by cold rolling
  10. Microstructural control of FeB-inoculated mottled low-alloy white iron by a design of experiments approach
  11. Applied
  12. Dislocation structure and crystallite size distribution in lath martensite determined by X-ray diffraction peak profile analysis
  13. Effect of minor addition of Pb upon interfacial reactions and mechanical properties at Sn-3.0Ag-0.5Cu/Cu and Sn-58Bi/Cu solder joints
  14. Elastic properties of braided ceramic matrix composites
  15. The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
  16. Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy
  17. The effect of alloying elements on constrained carbon equilibrium due to a quench and partition process
  18. Hardfacing behavior of Cr–Ni stainless steel with Co-based super alloys
  19. Development of SMD 32.768 kHz tuning fork-type crystals
  20. Notification
  21. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 23.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101763/html
Button zum nach oben scrollen