Microstructural control of FeB-inoculated mottled low-alloy white iron by a design of experiments approach
-
Juan Asensio
Abstract
The present research identifies manufacturing factors that influence the metastable constituent in mottled Nihard cast irons. These irons constitute the roll shells of duplex work rolls processed by centrifugal casting. The research methodology employed a saturated design of experiments program with 7 factors, 8 experiments and a resolution of III. An increase from 6 to 10 kg/T of inoculated FeB enhanced metastable solidification by increasing the amount of ledeburite and the amount of cementite. Similarly, decreasing the Si content from 1.1 – 1.2 to 0.9 – 1.0 wt.% increased the amount of ledeburite and cementite. Finally, the use of casting machines without isolating sleeves increased the roll barrel hardness in the as-cast condition and after tempering.
References
[1] J.A.Pero-Sanz Elorz: Fundiciones Férreas, Dossat, Madrid (1994).Suche in Google Scholar
[2] J.Asensio, J.A.Pero-Sanz, J.I.Verdeja: Mater. Char.49 (2003) 83.Suche in Google Scholar
[3] B.T.C.Nycen, T.P.Adams: Cast Iron Indefinite Roll produced by the Addition of Nb, US Patent 6013141, US, 2000.Suche in Google Scholar
[4] J.A.Pero-Sanz: Ciencia e Ingeniería de Materiales: Estructura, transformaciones, propiedades y selección, Dossat, Madrid (2006).Suche in Google Scholar
[5] D.A.Porter, K.E.Easterling: Phase Transformations in Metals and Alloys, T.J. Press, Cornwall (1989).Suche in Google Scholar
[6] G.E.P.Box, W.G.Hunter, J.S.Hunter: Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building, John Wiley and Sons, USA (1978).Suche in Google Scholar
[7] D.E.Coleman, D.C.Montgomery: Technometrics35 (1993).10.2307/1269285Suche in Google Scholar
[8] G.F.Vander Voort: Metallography: Principles and Practice, McGraw-Hill, New York (1984).10.31399/asm.tb.mpp.9781627082600Suche in Google Scholar
[9] G.E.P.Box, W.G.Hunter, J.S.Hunter: Estadística para Investigadores, Reverté Ediciones S.A., México D.F. (1997).Suche in Google Scholar
[10] C.Chatfield: Statistics for Technology – A Course in Applied Statistics, Chapman and Hall, Bristol (1991).Suche in Google Scholar
© 2008, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Basic
- A model to calculate the viscosity of silicate melts
- A model to calculate the viscosity of silicate melts
- A note on the application of the phase rule
- Thermodynamic properties of liquid silver–indium–tin alloys determined from emf measurements
- Unconstrained solidification and characterisation of near-eutectic Al–Cu–Ag alloys
- Tensile properties of L12 intermetallic foils fabricated by cold rolling
- Microstructural control of FeB-inoculated mottled low-alloy white iron by a design of experiments approach
- Applied
- Dislocation structure and crystallite size distribution in lath martensite determined by X-ray diffraction peak profile analysis
- Effect of minor addition of Pb upon interfacial reactions and mechanical properties at Sn-3.0Ag-0.5Cu/Cu and Sn-58Bi/Cu solder joints
- Elastic properties of braided ceramic matrix composites
- The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
- Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy
- The effect of alloying elements on constrained carbon equilibrium due to a quench and partition process
- Hardfacing behavior of Cr–Ni stainless steel with Co-based super alloys
- Development of SMD 32.768 kHz tuning fork-type crystals
- Notification
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Basic
- A model to calculate the viscosity of silicate melts
- A model to calculate the viscosity of silicate melts
- A note on the application of the phase rule
- Thermodynamic properties of liquid silver–indium–tin alloys determined from emf measurements
- Unconstrained solidification and characterisation of near-eutectic Al–Cu–Ag alloys
- Tensile properties of L12 intermetallic foils fabricated by cold rolling
- Microstructural control of FeB-inoculated mottled low-alloy white iron by a design of experiments approach
- Applied
- Dislocation structure and crystallite size distribution in lath martensite determined by X-ray diffraction peak profile analysis
- Effect of minor addition of Pb upon interfacial reactions and mechanical properties at Sn-3.0Ag-0.5Cu/Cu and Sn-58Bi/Cu solder joints
- Elastic properties of braided ceramic matrix composites
- The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
- Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy
- The effect of alloying elements on constrained carbon equilibrium due to a quench and partition process
- Hardfacing behavior of Cr–Ni stainless steel with Co-based super alloys
- Development of SMD 32.768 kHz tuning fork-type crystals
- Notification
- DGM News
