Wettability of polypropylene capillary membranes during the membrane distillation process
-
Marek Gryta
Abstract
Studies of membrane wettability in the membrane distillation process were performed with the application of hydrophobic capillary membranes made of polypropylene. Three kinds of Accurel PP membranes (Membrana GmbH, Germany) differing in the diameter of capillaries and pores as well as in the wall thickness were used. It was confirmed that membranes with lower wall thickness and larger pore size provide higher yields of the process. The studies demonstrated that the pores of used membranes located close to the external surface of capillaries are several times larger than those located inside the membrane wall. Based on air permeability measurements it was found that external surface of the membranes with such large pores was completely wetted by water after 50–80 h of membrane distillation. However, the pores located inside the wall with the diameter below 1 μm were not wetted and electrical conductivity of the obtained distillate was maintained at the level of 3–6 μS cm−1.
[1] Al-Obaidani, S., Curcio, E., Macedonio, F., Di Profio, G., Al-Hinai, H.,& Drioli, E. (2008). Potential of membrane distillation in seawater desalination: Thermal efficiency, sensitivity study and cost estimation. Journal of Membrane Science, 323, 85–98. DOI: 10.1016/j.memsci.2008.06.006. http://dx.doi.org/10.1016/j.memsci.2008.06.00610.1016/j.memsci.2008.06.006Suche in Google Scholar
[2] Bonyadi, S., & Chung, T.-S. (2009). Highly porous and macrovoid-free PVDF hollow fiber membranes for membrane distillation by a solvent-dope solution co-extrusion approach. Journal of Membrane Science, 331, 66–74. DOI: 10.1016/j.memsci.2009.01.014. http://dx.doi.org/10.1016/j.memsci.2009.01.01410.1016/j.memsci.2009.01.014Suche in Google Scholar
[3] El-Bourawi, M. S., Ding, Z., Ma, R., & Khayet, M. (2006). A framework for better understanding membrane distillation separation process. Journal of Membrane Science, 285, 4–29. DOI: 10.1016/j.memsci.2006.08.002. http://dx.doi.org/10.1016/j.memsci.2006.08.00210.1016/j.memsci.2006.08.002Suche in Google Scholar
[4] Gryta, M. (2008). Fouling in direct contact membrane distillation process. Journal of Membrane Science, 325, 383–394. DOI: 10.1016/j.memsci.2008.08.001. http://dx.doi.org/10.1016/j.memsci.2008.08.00110.1016/j.memsci.2008.08.001Suche in Google Scholar
[5] Gryta, M. (2007). Influence of polypropylene membrane surface porosity on the performance of membrane distillation process. Journal of Membrane Science, 287, 67–78. DOI: 10.1016/j.memsci.2006.10.011. http://dx.doi.org/10.1016/j.memsci.2006.10.01110.1016/j.memsci.2006.10.011Suche in Google Scholar
[6] Gryta, M. (2006). Water purification by membrane distillation process. Separation Science and Technology, 41, 1789–1798. DOI: 10.1080/01496390600674950. http://dx.doi.org/10.1080/0149639060067495010.1080/01496390600674950Suche in Google Scholar
[7] Gryta, M., Grzechulska-Damszel, J., Markowska, A., & Karakulski, K. (2009). The influence of polypropylene degradation on the membrane wettability during membrane distillation. Journal of Membrane Science, 326, 493–502. DOI: 10.1016/j.memsci.2008.10.022. http://dx.doi.org/10.1016/j.memsci.2008.10.02210.1016/j.memsci.2008.10.022Suche in Google Scholar
[8] Karakulski, K., & Gryta, M. (2005). Water demineralization by NF/MD integrated processes. Desalination, 177, 109–119. DOI: 10.1016/j.desal.2004.11.018. http://dx.doi.org/10.1016/j.desal.2004.11.01810.1016/j.desal.2004.11.018Suche in Google Scholar
[9] Karakulski, K., Gryta, M., & Sasim, M. (2006). Production of process water using integrated membrane processes. Chemical Papers, 60, 416–421. DOI: 10.2478/s11696-006-0076-y. http://dx.doi.org/10.2478/s11696-006-0076-y10.2478/s11696-006-0076-ySuche in Google Scholar
[10] Li, B., & Sirkar, K. K. (2004). Novel membrane and device for direct contact membrane distillation-based desalination process. Industrial & Engineering Chemistry Research, 43, 5300–5309. DOI: 10.1021/ie030871s. http://dx.doi.org/10.1021/ie030871s10.1021/ie030871sSuche in Google Scholar
[11] Scheirs, J. (2000). Compositional and failure analysis of polymers: A practical approach. Chichester, UK: Wiley. Suche in Google Scholar
[12] Wang, J., Fan, B., Luan, Z., Qu, D., Peng, X., & Hou, D. (2008). Integration of direct contact membrane distillation and recirculating cooling water system for pure water production. Journal of Cleaner Production, 16, 1847–1855. DOI: 10.1016/j.jclepro.2007.12.004. http://dx.doi.org/10.1016/j.jclepro.2007.12.00410.1016/j.jclepro.2007.12.004Suche in Google Scholar
[13] Zhang, J., Dow, N., Duke, M., Ostarcevic, E., Li, J.-D., & Gray, S. (2010). Identification of material and physical features of membrane distillation membranes for high performance desalination. Journal of Membrane Science, 349, 295–303. DOI: 10.1016/j.memsci.2009.11.056. http://dx.doi.org/10.1016/j.memsci.2009.11.05610.1016/j.memsci.2009.11.056Suche in Google Scholar
[14] Zhang, M., Nguyen, Q. T., & Ping, Z. (2009). Hydrophilic modification of poly(vinylidene fluoride) microporous membrane. Journal of Membrane Science, 327, 78–86. DOI: 10.1016/j.memsci.2008.11.020. http://dx.doi.org/10.1016/j.memsci.2008.11.02010.1016/j.memsci.2008.11.020Suche in Google Scholar
© 2011 Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Bioactive papaverine derivatives bind G-quadruplexes selectively
- Ethanol production in a bioreactor with an integrated membrane distillation module
- Wettability of polypropylene capillary membranes during the membrane distillation process
- A reburning process using sewage sludge-derived syngas
- Chemical engineering approach to regenerative medicine
- Photosensitised oxidation of a water pollutant using sulphonated porphyrin
- Influence of selected biowaste materials pre-treatment on their anaerobic digestion
- Potassium sorbate release from poly(vinyl alcohol)-bacterial cellulose films
- Modelling of sorbic acid diffusion through bacterial cellulose-based antimicrobial films
- The use of stable isotopes ratios for authentication of fruit juices
- Reduction of ostazine dyes’ photodynamic effect by Fenton reaction
Artikel in diesem Heft
- Bioactive papaverine derivatives bind G-quadruplexes selectively
- Ethanol production in a bioreactor with an integrated membrane distillation module
- Wettability of polypropylene capillary membranes during the membrane distillation process
- A reburning process using sewage sludge-derived syngas
- Chemical engineering approach to regenerative medicine
- Photosensitised oxidation of a water pollutant using sulphonated porphyrin
- Influence of selected biowaste materials pre-treatment on their anaerobic digestion
- Potassium sorbate release from poly(vinyl alcohol)-bacterial cellulose films
- Modelling of sorbic acid diffusion through bacterial cellulose-based antimicrobial films
- The use of stable isotopes ratios for authentication of fruit juices
- Reduction of ostazine dyes’ photodynamic effect by Fenton reaction
