Flexible silicone rubber/carbon fiber/nano-diamond composites with enhanced thermal conductivity via reducing the interface thermal resistance
-
Chaoyu Wang
,
Zhu Luo
Abstract
Insulating materials with heat dissipation are urgently required for modern electronic devices and systems. In this study, 4,4-methylene diphenyl diisocyanate was used as the coupling agent, and nano-diamond (ND) particles were grafted onto the surface of carbon fibers (CFs) to prepare CF-ND/silicone rubber (SR) composites. The ND acted as a “bridge” among CFs, which can reduce the interface thermal resistance between CFs because the dot-like ND can increase the interfacial area of CFs, making it easier to form heat-conducting networks between SR. When the content of CF-ND (1:6) was 20%, the thermal conductivity of the SR composite was 0.305 W/(m·K), 69% higher than that of pure SR. The ND between CFs can improve the dynamic mechanical properties by acting as a crack pinhole. In addition, the CF-ND/SR composites also exhibited excellent thermal stability. This work has enormous potential for advanced electronic devices.
Funding source: Scientific Research Project of Introducing Talents of Guizhou University
Award Identifier / Grant number: [2020] 53
Funding source: the Science and Technology Department of Guizhou Province
Award Identifier / Grant number: Grant No. Platform &Talents [2019] 2030
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was supported by Scientific Research Project of Introducing Talents of Guizhou University ([2020] 53) and financially supported by the Science and Technology Department of Guizhou Province (grant no. Platform & Talents [2019] 2030).
-
Conflict of interest statement: The authors declare that they have no conflicts of interest regarding this article.
References
1. Li, X. L., Sheng, X. X., Guo, X. Multifunctional HDPE/CNTs/PW composite phase change materials with excellent thermal and electrical conductivities. J. Mater. Sci. Technol. 2021, 86, 171–179; https://doi.org/10.1016/j.jmst.2021.02.009.Suche in Google Scholar
2. Lee, G. Y., Zhang, J. H., Gao, J. X. Study on structure optimization of a dual IGBT module heat sink in a DC–DC converter under natural convection based on field synergy theory. IEEJ Trans. Electr. Electron. Eng. 2019, 14, 1524–1528.10.1002/tee.22972Suche in Google Scholar
3. Ruan, M., Yang, D., Guo, W. Improved dielectric properties, mechanical properties, and thermal conductivity properties of polymer composites via controlling interfacial compatibility with bio-inspired method. Appl. Surf. Sci. 2018, 439, 186–195; https://doi.org/10.1016/j.apsusc.2017.12.250.Suche in Google Scholar
4. Shen, H., Guo, J., Wang, Y. Bioinspired modification of h-BN for high thermal conductive composite films with aligned structure. ACS Appl. Mater. Interfaces 2015, 7, 5701–5708; https://doi.org/10.1021/am507416y.Suche in Google Scholar PubMed
5. Yu, G. C., Wu, L. Z., Feng, L. J. Enhancing the thermal conductivity of carbon fiber reinforced polymer composite laminates by coating highly oriented graphite films. Polym. Compos. 2021, 42, 1063–1070.10.1016/j.matdes.2015.09.096Suche in Google Scholar
6. Yang, X. T., Tang, L., Guo, Y. Q. Improvement of thermal conductivities for PPS dielectric nanocomposites via incorporating NH2-POSS functionalized nBN fillers. Compos. Appl. Sci. Manuf. 2017, 101, 237–241; https://doi.org/10.1016/j.compositesa.2017.06.005.Suche in Google Scholar
7. Zhang, J., Wang, X., Yu, C. A facile method to prepare flexible boron nitride/poly(vinyl alcohol) composites with enhanced thermal conductivity. Polym. Compos. 2020, 149, 41–47.10.1016/j.compscitech.2017.06.008Suche in Google Scholar
8. Xiong, S. W., Fu, P. G., Zou, Q. Heat conduction and antibacterial hexagonal boron nitride/polypropylene nanocomposite fibrous membranes for face masks with long-time wearing performance. ACS Appl. Mater. Interfaces 2020, 13, 196–206; https://doi.org/10.1021/acsami.0c17800.Suche in Google Scholar PubMed
9. Zhou, M., Lin, T. Q., Huang, F. Q. Highly conductive porous graphene/ceramic composites for heat transfer and thermal energy storage. Adv. Funct. Mater. 2013, 23, 2263–2269; https://doi.org/10.1002/adfm.201202638.Suche in Google Scholar
10. Li, C. G., Wei, X. D., Kysar, J. W. Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 2008, 321, 385–388.10.1126/science.1157996Suche in Google Scholar PubMed
11. Bao, R., Yan, S. L., Qin, Y. Improving thermal conductivity and shear strength of carbon nanotubes/epoxy composites via thiol-ene click reaction. J. Appl. Polym. Sci. 2017, 134, 1582–1674; https://doi.org/10.1002/app.44579.Suche in Google Scholar
12. Robert, H., Kelby, C., Rodney, A. Surface studies of hydroxylated multi-wall carbon nanotubes. Appl. Surf. Sci. 2012, 258, 4835–4843.10.1016/j.apsusc.2012.01.008Suche in Google Scholar
13. Chen, Z., Ren, W., Gao, L. Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition. Nat. Mater. 2011, 10, 424; https://doi.org/10.1038/nmat3001.Suche in Google Scholar
14. Zhao, Y. H., Zhang, Y. F., Wu, Z. K. Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black. Compos. B Eng. 2016, 84, 52–55; https://doi.org/10.1016/j.compositesb.2015.08.074.Suche in Google Scholar
15. Ma, J., Shang, T. Y., Ren, L. L. Through-plane assembly of carbon fibers into 3D skeleton achieving enhanced thermal conductivity of a thermal interface material. Chem. Eng. J. 2020, 380, 506–523; https://doi.org/10.1016/j.cej.2019.122550.Suche in Google Scholar
16. Yu, S., Park, K., Lee, J. W. Enhanced thermal conductivity of epoxy/Cu-plated carbon fiber fabric composites. Macromol. Res. 2017, 25, 559–564; https://doi.org/10.1007/s13233-017-5114-9.Suche in Google Scholar
17. Wang, S., Long, C., Wang, X. Synthesis and properties of silicone rubber/organomontmorillonite hybrid nanocomposites. J. Appl. Polym. Sci. 2015, 69, 1557–1561.10.1002/(SICI)1097-4628(19980822)69:8<1557::AID-APP10>3.0.CO;2-SSuche in Google Scholar
18. Qiao, Y. L., Zhang, J. T., Zhang, M. A magnetic field-and frequency-dependent dynamic shear modulus model for isotropic silicone rubber-based magnetorheological elastomers. Compos. Sci. Technol. 2021, 204, 57–62; https://doi.org/10.1016/j.compscitech.2020.108637.Suche in Google Scholar
19. Zhu, L., Zhao, S. G., Zhang, C. Effects of chain structure on damping property and local dynamics of phenyl silicone rubber. Polym. Test. 2021, 93, 106885–106889; https://doi.org/10.1016/j.polymertesting.2020.106885.Suche in Google Scholar
20. Zhang, R. L., Gao, B., Ma, Q. H. Directly grafting graphene oxide onto carbon fiber and the effect on the mechanical properties of carbon fiber composites. Mater. Des. 2016, 93, 364–369; https://doi.org/10.1016/j.matdes.2016.01.003.Suche in Google Scholar
21. Zhang, X. Q., Fan, X. Y., Yan, C. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide. ACS Appl. Mater. Interfaces 2012, 4, 1543–1546; https://doi.org/10.1021/am201757v.Suche in Google Scholar PubMed
22. Lei, M., He, X. D., Li, Y. B. Grafting carbon nanotubes onto carbon fiber by use of dendrimers. Mater. Lett. 2010, 4, 1543–1553.Suche in Google Scholar
23. Shen, W., Wu, W., Liu, C. Achieving a high thermal conductivity for segregated BN/PLA composites via hydrogen bonding regulation through cellulose network. Polym. Adv. Technol. 2020, 31, 1911–1920; https://doi.org/10.1002/pat.4916.Suche in Google Scholar
24. Sun, H., Zhong, Y. Improvement of the thermal conductivity of a phase change material by the functionalized carbon nanotubes. Chem. Eng. Sci. 2012, 81, 140–145.10.1016/j.ces.2012.07.002Suche in Google Scholar
25. Bilger, D. W., Figueroa, J. A., Redeker, N. D. Hydrogen-bonding-directed ordered assembly of carboxylated poly(3-alkylthiophene)s. ACS Omega 2017, 2, 8526–8535; https://doi.org/10.1021/acsomega.7b01361.Suche in Google Scholar PubMed PubMed Central
26. Zhang, F., Feng, Y. Y., Feng, W. Three-dimensional interconnected networks for thermally conductive polymer composites. Math. Sci. Eng. R. 2020, 142, 272–278; https://doi.org/10.1016/j.mser.2020.100580.Suche in Google Scholar
27. Su, S. H., Huang, Y., Qu, S. Microdiamond/PLA composites with enhanced thermal conductivity through improving filler/matrix interface compatibility. Diam. Relat. Mater. 2018, 81, 161–167; https://doi.org/10.1016/j.diamond.2017.12.011.Suche in Google Scholar
28. Li, L., Zhou, B., Han, G. Understanding the effect of interfacial engineering on interfacial thermal resistance in nacre-like cellulose nanofiber/graphene film. Compos. Sci. Technol. 2020, 197, 108–114; https://doi.org/10.1016/j.compscitech.2020.108229.Suche in Google Scholar
29. Yu, J. H., Huang, X. Y., Wu, C. Interfacial modification of boron nitride nanoplatelets for epoxy composites with improved thermal properties. Polymer 2011, 53, 471–480.10.1016/j.polymer.2011.12.040Suche in Google Scholar
30. Zhang, F., Feng, Y. Y., Feng, W. Three-dimensional interconnected networks for thermally conductive polymer composites: design, preparation, properties, and mechanisms. Polym. Adv. Technol. 2018, 29, 337–341.10.1016/j.mser.2020.100580Suche in Google Scholar
31. Wang, F., Yao, Y., Zeng, X. Highly thermally conductive polymer nanocomposites based on boron nitride nanosheets decorated with silver nanoparticles. Polym. Eng. Sci. 2013, 102, 94–98.10.1039/C6RA00358CSuche in Google Scholar
32. Cho, J., Chen, J. Y., Daniel, I. M. Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement. Scripta Mater 2007, 56, 685–688; https://doi.org/10.1016/j.scriptamat.2006.12.038.Suche in Google Scholar
33. An, F., Lu, C., Li, Y. Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite. Mater. Des. 2012, 33, 197–202; https://doi.org/10.1016/j.matdes.2011.07.027.Suche in Google Scholar
34. Li, Y., Chen, C. X., Zhang, S., Huang, J. Electrical conductivity and electromagnetic interference shielding characteristics of multiwalled carbon nanotube filled polyacrylate composite films. Appl. Surf. Sci. 2008, 254, 5766–5771; https://doi.org/10.1016/j.apsusc.2008.03.077.Suche in Google Scholar
35. Li, H. Y., Marco, L., Albert, M. Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices. Polym. Eng. Sci. 2021, 273, 121–126; https://doi.org/10.1016/j.conbuildmat.2020.121950.Suche in Google Scholar
36. Guan, J., Mirjalili, V. Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes. Compos. Sci. Technol. 2011, 71, 1569–1578.10.1016/j.compscitech.2011.06.015Suche in Google Scholar
37. Greef, N. D., Gorbatikh, L., Godara, A. The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites. Carbon 2011, 49, 4650–4664; https://doi.org/10.1016/j.carbon.2011.06.047.Suche in Google Scholar
38. Xie, J., Xin, D., Cao, H. Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment. Surf. Coating. Technol. 2011, 206, 191–201; https://doi.org/10.1016/j.surfcoat.2011.04.016.Suche in Google Scholar
39. Zhang, R. L., Gao, B., Ma, Q. H. Directly grafting graphene oxide onto carbon fiber and the effect on the mechanical properties of carbon fiber composites. Polym. Eng. Sci. 2016, 93, 364–369; https://doi.org/10.1016/j.matdes.2016.01.003.Suche in Google Scholar
40. Zhang, X., Fu, S., Fu, M. Measurements of thermal conductivity and electrical conductivity of a single carbon fiber. Int. J. Thermophys. 2000, 21, 965–980.10.1023/A:1006674510648Suche in Google Scholar
41. Li, H. Y., Li, M. Oxygen plasma modification of carbon fiber rovings for enhanced interaction toward mineral-based impregnation materials and concrete matrices. Construct. Build. Mater. 2021, 273, 121–130; https://doi.org/10.1016/j.conbuildmat.2020.121950.Suche in Google Scholar
42. Isis, E., Mejias, C., Joey, D. Graphene oxide functionalized with ethylenediamine triacetic acid for heavy metal adsorption and anti-microbial applications. Carbon 2014, 77, 289–301.10.1016/j.carbon.2014.05.032Suche in Google Scholar
43. Lazaros, T., Subhas, D., Sandip, R. High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Mater. Des. 2014, 58, 1–11.10.1016/j.matdes.2014.01.071Suche in Google Scholar
44. Krueger, A., Stegk, J., Liang, Y. Biotinylated nanodiamond: simple and efficient functionalization of detonation diamond. Langmuir 2008, 24, 4200–4204; https://doi.org/10.1021/la703482v.Suche in Google Scholar PubMed
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Material Properties
- Development and characterization of eco-friendly biopolymer gellan gum based electrolyte for electrochemical application
- Structural transitions and rheological properties of poly-d-lysine hydrobromide: effect of pH, salt, temperature, and shear rate
- Carbon dioxide adsorption onto modified polyvinyl chloride with ionic liquid
- Synergistic effect of organic-Zn(H2PO2)2 and lithium containing polyhedral oligomeric phenyl silse-squioxane on flame-retardant, thermal and mechanical properties of poly(ethylene terephthalate)
- Preparation and Assembly
- Network structural hardening of polypropylene matrix using hybrid of 0D, 1D and 2D carbon-ceramic nanoparticles with enhanced mechanical and thermomechanical properties
- An environment friendly hemp fiber modified with phytic acid for enhancing fire safety of automobile parts
- Flexible silicone rubber/carbon fiber/nano-diamond composites with enhanced thermal conductivity via reducing the interface thermal resistance
- In situ synthesis of Ag NPs in the galactomannan based biodegradable composite for the development of active packaging films
- Engineering and Processing
- Multi-objective optimization of injection molded parts with insert based on IFOA-GRNN-NSGA-II
Artikel in diesem Heft
- Frontmatter
- Material Properties
- Development and characterization of eco-friendly biopolymer gellan gum based electrolyte for electrochemical application
- Structural transitions and rheological properties of poly-d-lysine hydrobromide: effect of pH, salt, temperature, and shear rate
- Carbon dioxide adsorption onto modified polyvinyl chloride with ionic liquid
- Synergistic effect of organic-Zn(H2PO2)2 and lithium containing polyhedral oligomeric phenyl silse-squioxane on flame-retardant, thermal and mechanical properties of poly(ethylene terephthalate)
- Preparation and Assembly
- Network structural hardening of polypropylene matrix using hybrid of 0D, 1D and 2D carbon-ceramic nanoparticles with enhanced mechanical and thermomechanical properties
- An environment friendly hemp fiber modified with phytic acid for enhancing fire safety of automobile parts
- Flexible silicone rubber/carbon fiber/nano-diamond composites with enhanced thermal conductivity via reducing the interface thermal resistance
- In situ synthesis of Ag NPs in the galactomannan based biodegradable composite for the development of active packaging films
- Engineering and Processing
- Multi-objective optimization of injection molded parts with insert based on IFOA-GRNN-NSGA-II
