Persistent inhibition performance of amine polymers to inhibit clay swelling
-
Xiaobo Shu
,
Liping Wan
Abstract
Clay hydration and swelling can cause shale instability in the drilling of oil and gas wells. The persistent inhibition performance of polyether amine (PEA) and poly(vinyl alcohol-g-dimethyl aminopropyl methacrylamide) (PVA-g-DMAPMA) as amine clay inhibitors has been investigated through hot rolling dispersion test, bulk hardness test, and bentonite inhibition test. The micro-mechanism has also been explained by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and X-ray diffraction (XRD) analyses. Through the interaction of PEA and PVA-g-DMAPMA, the PEA can enter into clay platelets to exclude water molecules from entering and hydrating the clay, and the PVA-g-DMAPMA can affect the surface of clay minerals to prevent further intrusion of water molecules. Due to the effect of multiple cationic sites, both PEA and PVA-g-DMAPMA can maintain persistent clay inhibition and are less susceptible to reversing the adsorption.
Acknowledgments
This work was financially supported by the State Key Program of National Natural Science Foundation of China (grant no. 51134004).
References
[1] Boek ES, Coveney PV, Skipper NT. J. Am. Chem. Soc. 1995, 117, 12608–12617.10.1021/ja00155a025Suche in Google Scholar
[2] Al-Mhaidib AI. Geotech. Geol. Eng. 1998, 16, 291–307.10.1023/A:1008819025348Suche in Google Scholar
[3] Wangler T, Scherer GW. Environ. Geol. 2008, 56, 529–534.10.1007/s00254-008-1380-3Suche in Google Scholar
[4] Osisanya SO, Chenevert ME. J. Can. Petrol. Technol. 1996, 35, 53–63.Suche in Google Scholar
[5] Zeynali ME. J. Pet. Sci. Eng. 2012, 82, 120–124.10.1016/j.petrol.2012.01.006Suche in Google Scholar
[6] Van Oort E. J. Pet. Sci. Eng. 2003, 38, 213–235.10.1016/S0920-4105(03)00034-2Suche in Google Scholar
[7] Corrêa CC, Nascimento RSV. J. Therm. Anal. Calorim. 2005, 79, 295–298.10.1007/s10973-005-0052-8Suche in Google Scholar
[8] Díaz-Pérez A, Cortés-Monroy I, Roegiers JC. J. Petrol. Sci. Eng. 2007, 58, 83–98.10.1016/j.petrol.2006.11.011Suche in Google Scholar
[9] Laird DA. Appl. Clay. Sci. 2006, 34, 74–87.10.1016/j.clay.2006.01.009Suche in Google Scholar
[10] Madsen FT, Müller-Vonmoos M. Appl. Clay. Sci. 1989, 4, 143–156.10.1016/0169-1317(89)90005-7Suche in Google Scholar
[11] Balaban RDC, Vidal ELF, Borges MR. Appl. Clay. Sci. 2015, 105–106, 124–130.10.1016/j.clay.2014.12.029Suche in Google Scholar
[12] Patel AD. SPE-121737-MS, International Symposium on Oilfield Chemistry, Texas, April 20–22, 2009.Suche in Google Scholar
[13] Clark RK, Scheuerman RF, Rath H, Van Laar HG. J. Petrol. Technol. 1976, 28, 719–727.10.2118/5514-PASuche in Google Scholar
[14] Khodja M, Canselier JP, Bergaya F, Fourard K, Khodjae M, Cohautc N, Benmounahd A. Appl. Clay. Sci. 2010, 49, 383–393.10.1016/j.clay.2010.06.008Suche in Google Scholar
[15] Merinska D, Kovarova L, Kalendova A, Vaculik J, Weiss Z, Chmielova M, Malac J, Simonik J. J. Polym. Eng. 2003, 23, 241–258.10.1515/POLYENG.2003.23.4.241Suche in Google Scholar
[16] Kongkhlang T, Kousaka Y, Umemura T, Nakaya D, Thuamthong W, Pattamamongkolchai Y, Chirachanchai S. Polymer 2008, 49, 1676–1684.10.1016/j.polymer.2008.02.006Suche in Google Scholar
[17] Patel A, Stamatakis E, Young S, Friedheim J. SPE-106476-MS, International Symposium on Oilfield Chemistry, Texas, February 28–March 2, 2007.Suche in Google Scholar
[18] Peng B, Luo PY, Guo WY, Yuan Q. J. Appl. Polym. Sci. 2013, 129, 1074–1079.10.1002/app.38784Suche in Google Scholar
[19] Zhong H, Qiu Z, Huang W, Xie B, Wang W. Open Petrol. Eng. J. 2013, 6, 49–56.10.2174/1874834101306010049Suche in Google Scholar
[20] Pelot DD, Jun S, Yarin AL. J. Non-Newtonian Fluid Mech. 2015, 219, 50–64.10.1016/j.jnnfm.2015.03.001Suche in Google Scholar
[21] Katti DR, Matar MI, Katti KS, Amarasinghe PM. KSCE J. Civ. Eng. 2009, 13, 243–255.10.1007/s12205-009-0243-0Suche in Google Scholar
[22] Yoon J, Mohtar CSE. Eng. Geol. 2014, 179, 32v40.10.1016/j.enggeo.2014.06.012Suche in Google Scholar
[23] Palanivel R, Velraj G. Indian J. Pure Appl. Phys. 2007, 45, 501–508.Suche in Google Scholar
[24] Xue W, He H, Zhu J, Yuan P. Spectrochim. Acta A 2007, 67, 1030–1036.10.1016/j.saa.2006.09.024Suche in Google Scholar PubMed
[25] Ouellet-Plamondon CM, Stasiak J, Al-Tabbaa A. Colloid. Surface. A 2014, 444, 330–337.10.1016/j.colsurfa.2013.12.032Suche in Google Scholar
[26] Greenwell HC, Harvey MJ, Boulet P, Bowden AA, Coveney PV. Macromolecules 2005, 38, 6189–6200.10.1021/ma0503817Suche in Google Scholar
[27] Chou CC, Shieu FS, Lin JJ. Macromolecules 2003, 36, 2187–2189.10.1021/ma025773hSuche in Google Scholar
[28] Greenwell HC, Bowden AA, Chen B, Boulet P, Evans JRG, Coveney PV, Whiting A. J. Mater. Chem. 2006, 16, 1082–1094.10.1039/b505217cSuche in Google Scholar
©2018 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Material properties
- Persistent inhibition performance of amine polymers to inhibit clay swelling
- Evaluation of stearic acid modified industrial lime sludge waste as a filler in high density polyethylene composites
- Effects of graphene surface energy on the structure and mechanical properties of phenolic foams
- Experimental and theoretical investigations of the high performance blends of PEEK/PEI
- Reciprocating friction and wear of polyimide composites filled with solid lubricants
- Dual pH-/temperature-responsive and fluorescent hydrogel for controlled drug delivery
- Thermoelectric behavior of PEDOT:PSS/CNT/graphene composites
- Investigating the properties of maleated poly(lactic acid) and its effect on poly(lactic acid)/cellulose nanofiber composites
- Preparation of graphene and its application in polycarbonate/acrylonitrile-butadiene-styrene composites
- Preparation and assembly
- Electrospinning of poly(lactic acid)/polycaprolactone blends: investigation of the governing parameters and biocompatibility
Artikel in diesem Heft
- Frontmatter
- Material properties
- Persistent inhibition performance of amine polymers to inhibit clay swelling
- Evaluation of stearic acid modified industrial lime sludge waste as a filler in high density polyethylene composites
- Effects of graphene surface energy on the structure and mechanical properties of phenolic foams
- Experimental and theoretical investigations of the high performance blends of PEEK/PEI
- Reciprocating friction and wear of polyimide composites filled with solid lubricants
- Dual pH-/temperature-responsive and fluorescent hydrogel for controlled drug delivery
- Thermoelectric behavior of PEDOT:PSS/CNT/graphene composites
- Investigating the properties of maleated poly(lactic acid) and its effect on poly(lactic acid)/cellulose nanofiber composites
- Preparation of graphene and its application in polycarbonate/acrylonitrile-butadiene-styrene composites
- Preparation and assembly
- Electrospinning of poly(lactic acid)/polycaprolactone blends: investigation of the governing parameters and biocompatibility
