Preparation and characterization of anti-fouling PVDF membrane modified by chitin
-
Manman Xie
,
Juncheng Hu
Abstract
Poly(vinylidene fluoride) (PVDF)/chitin (CH) blend membranes were prepared via the method of immersion-precipitation phase transformation with the solvent system N,N-dimethylacetamide (DMAc)/lithium chloride (LiCl) as solvent and water as coagulant. The effect of CH on membrane structure and performance was investigated. Owing to the strong hydrophilicity, CH chains enriched on the blend membrane surface and improved the hydrophilicity of the membrane. The addition of CH also led to the formation of finger-like pores and the increase of pore size and porosity. The flux and the flux recovery ratio (FRR) of the blend membrane were higher than that of pure PVDF membrane. The fouling resistance of the blend membrane was lower than that of PVDF original membrane. In a word, the addition of CH to PVDF membrane improved the hydrophilicity and the anti-fouling ability of PVDF membrane.
Funding source: National Natural Science Foundation of China
Award Identifier / Grant number: 14JCTPJC00522
Award Identifier / Grant number: 14JCZDJC38300
Funding statement: The authors would like to acknowledge the financial support from the National Natural Science Foundation of China (51303129 and 21174103), the Program for Natural Science Foundation of Tianjin (14JCTPJC00522 and 14JCZDJC38300) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (20121201120005 and 20121201110003).
Acknowledgments
The authors would like to acknowledge the financial support from the National Natural Science Foundation of China (51303129 and 21174103), the Program for Natural Science Foundation of Tianjin (14JCTPJC00522 and 14JCZDJC38300) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (20121201120005 and 20121201110003).
References
[1] Hashim NA, Liu F, Li K. J. Membr. Sci. 2009, 345, 134–141.10.1016/j.memsci.2009.08.032Suche in Google Scholar
[2] Asatekin A, Kang S, Elimelech M, Mayes AM. J. Membr. Sci. 2007, 298, 136–146.10.1016/j.memsci.2007.04.011Suche in Google Scholar
[3] Boributh S, Chanachai A, Jiraratananon R. J. Membr. Sci. 2009, 342, 97–104.10.1016/j.memsci.2009.06.022Suche in Google Scholar
[4] Safarpour M, Khataee A, Vatanpour V. Sep. Purif. Technol. 2015, 140, 32–42.10.1016/j.seppur.2014.11.010Suche in Google Scholar
[5] Dumas L, Fleury E, Portinha D. Polymer 2014, 55, 2628–2634.10.1016/j.polymer.2014.04.002Suche in Google Scholar
[6] Yuan J, Meng J, Kang YL, Du QY, Zhang YF. Appl. Surf. Sci. 2012, 258, 2856–2863.10.1016/j.apsusc.2011.10.148Suche in Google Scholar
[7] Sui Y, Gao X, Wang Z, Gao C. J. Membr. Sci. 2012, 394, 107–119.10.1016/j.memsci.2011.12.038Suche in Google Scholar
[8] Chang Y, Ko CY, Shih YJ, Quémener D, Deratani A, Wei TC, Lai JY. J. Membr. Sci. 2009, 345, 160–169.10.1016/j.memsci.2009.08.039Suche in Google Scholar
[9] Li H, Shi W, Zhang Y, Zhou R, Zhang H. Appl. Surf. Sci. 2015, 346, 134–146.10.1016/j.apsusc.2015.04.027Suche in Google Scholar
[10] Silva TLS, Morales-Torres S, Figueiredo JL, Silva AM. Desalination 2015, 357, 233–245.10.1016/j.desal.2014.11.025Suche in Google Scholar
[11] Minehara H, Dan K, Ito Y, Takabatake H, Henmi M. J. Membr. Sci. 2014, 466, 211–219.10.1016/j.memsci.2014.04.039Suche in Google Scholar
[12] Razzaghi MH, Safekordi A, Tavakolmoghadam M, Rekabdar F, Hemmati M. J. Membr. Sci. 2014, 470, 547–557.10.1016/j.memsci.2014.07.026Suche in Google Scholar
[13] Xiao K, Sun J, Mo Y, Fang Z, Liang P, Huang X, Ma J, Ma B. Desalination 2014, 243, 217–225.10.1016/j.desal.2013.09.026Suche in Google Scholar
[14] Liu B, Chen C, Li T, Crittenden J, Chen Y. J. Membr. Sci. 2013, 445, 66–75.10.1016/j.memsci.2013.05.043Suche in Google Scholar
[15] Vatanpour V, Madaeni SS, Rajabi L, Zinadini S, Derakhshan AA. J. Membr. Sci. 2012, 401, 132–143.10.1016/j.memsci.2012.01.040Suche in Google Scholar
[16] Li N, Xiao C, An S. J. Func. Mater. 2007, 12, 1975–1980.Suche in Google Scholar
[17] Chatterjee S, Judeh ZMA. Carbohydr. Polym. 2015, 123, 432–442.10.1016/j.carbpol.2015.01.072Suche in Google Scholar PubMed
[18] Lin S, Chen L, Huang L, Cao S, Luo X, Liu K. Ind. Crops Prod. 2015, 70, 395–403.10.1016/j.indcrop.2015.03.040Suche in Google Scholar
[19] Cao K, Jiang Z, Zhao J, Zhao C, Gao C, Pan F. Wang B, Cao X, Yang J. J. Membr. Sci. 2014, 469, 272–283.10.1016/j.memsci.2014.06.053Suche in Google Scholar
[20] Rinaudo M. Prog. Polym. Sci. 2006, 31, 603–632.10.1016/j.progpolymsci.2006.06.001Suche in Google Scholar
[21] Chang C, Chen S, Zhang L. J. ater. Chem., 2011, 21, 3865–3871.10.1039/c0jm03075aSuche in Google Scholar
[22] Avérous L. J. Macromol. Sci. 2004, 44, 231–274.10.1081/MC-200029326Suche in Google Scholar
[23] Benhabiles MS, Salah R, Lounici H, Drouiche N, Goosen MFA, Mameri N. Food Hydrocolloids 2012, 29, 48–56.10.1016/j.foodhyd.2012.02.013Suche in Google Scholar
[24] Agboh OC, Qin Y. Polym. Adv. Technol. 1997, 8, 355–365.10.1002/(SICI)1099-1581(199706)8:6<355::AID-PAT651>3.0.CO;2-TSuche in Google Scholar
[25] Wang A. Chitin Chemistry, Science Press: Beijing, 2008, 60–61.Suche in Google Scholar
[26] Qin A, Li X, Zhao X, Liu D, He C. J. Membr. Sci. 2015, 480, 1–10.10.1016/j.memsci.2015.01.035Suche in Google Scholar
[27] Morin A, Dufresne A. Macromolecules 2002, 35, 2190–2199.10.1021/ma011493aSuche in Google Scholar
[28] Poirier M, Charlet G. Carbohydr. Polym. 2002, 50, 363–370.10.1016/S0144-8617(02)00040-1Suche in Google Scholar
[29] Zhang S, Wang R, Zhang S, Li G, Zhang Y. Chem. Eng. J. 2013, 230, 260–271.10.1016/j.cej.2013.06.098Suche in Google Scholar
[30] Zheng H, Zhou J, Du Y, Zhang L. J. Appl. Polym. Sci. 2002, 86, 1679–1683.10.1002/app.11043Suche in Google Scholar
[31] Teeäär R, Serimaa R, Paakkarl T. Polym. Bull. 1987, 17, 231–237.10.1007/BF00285355Suche in Google Scholar
[32] Wang YD, Cakmak M. J. Appl. Polym. Sci. 1998, 68, 909–926.10.1002/(SICI)1097-4628(19980509)68:6<909::AID-APP5>3.0.CO;2-LSuche in Google Scholar
[33] Chen X, Zhao B, Han P, Fu W, Chen L. React. Funct. Polym. 2014, 84, 10–20.10.1016/j.reactfunctpolym.2014.08.005Suche in Google Scholar
[34] Safarpour M, Khataee A, Vatanpour V. Sep. Purif. Technol. 2015, 140, 32–42.10.1016/j.seppur.2014.11.010Suche in Google Scholar
[35] Elashmawi IS, Elsayed NH, Altalhi FA. J. Alloys Compd. 2014, 617, 877–883.10.1016/j.jallcom.2014.08.088Suche in Google Scholar
[36] Ma T, Cui Z, Wu Y, Qin S, Wang H, Yan F, Han N, Li J. J. Memb. Sci. 2013, 444, 213–222.10.1016/j.memsci.2013.05.028Suche in Google Scholar
[37] Peesan M, Rujiravanit R, Supaphol P. Polym. Test. 2003, 22, 381–387.10.1016/S0142-9418(02)00118-6Suche in Google Scholar
[38] Mu C, Su Y, Sun M, Chen W, Jiang Z. J. Membr. Sci. 2010, 350, 293–300.10.1016/j.memsci.2010.01.004Suche in Google Scholar
[39] Li N, Xiao C, An S, Hu X. Desalination 2010, 250, 530–537.10.1016/j.desal.2008.10.027Suche in Google Scholar
[40] Wang Z, Yu H, Xia J, Zhang F, Li F, Xia Y, Li Y. Desalination 2012, 299, 50–54.10.1016/j.desal.2012.05.015Suche in Google Scholar
[41] Shen X, Liu J, Feng X, Zhao Y, Chen L. J. Biomed. Mater. Res. Part A 2015, 103, 683–692.10.1002/jbm.a.35213Suche in Google Scholar
[42] Kim KS, Lee KH, Cho K, Park CE. J. Membr. Sci. 2002, 199, 135–145.10.1016/S0376-7388(01)00686-XSuche in Google Scholar
[43] Yu HM, Ziegler C, Oszcipok M, Zobel M, Hebling C. Electrochim. Acta 2006, 51, 1199–1207.10.1016/j.electacta.2005.06.036Suche in Google Scholar
©2017 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
