Home Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
Article
Licensed
Unlicensed Requires Authentication

Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer

  • Leilei Song , Jialu Li , Yufen Zhao , Xiaoming Chen and Li Chen EMAIL logo
Published/Copyright: September 14, 2016
Become an author with De Gruyter Brill

Abstract

In this study, the short-cut web interlayer and three-dimensional (3D) needle-punched technique were used to improve the interlaminar shear strength (ILSS) of 2.5D fabric laminated composites. The ILSS was measured by the short beam testing method, and the tensile and bending tests were carried out to investigate the in-plane mechanical properties. Observations on microstructure and crack propagation were carried out. The damage mechanisms of different 2.5D fabric laminated composites were analyzed. The results showed that the short-cut web interlayer and 3D needle-punched technique resulted in the improvement of ILSS, and they affected the tensile and bending properties of 2.5D fabric laminated composites.

Acknowledgments

The authors wish to acknowledge the sponsorship of Tianjin Municipal Science and Technology Commission, China (no. 13TXSYJC40500).

References

[1] Al-Khudairi O, Hadavinia H, Waggott A, Lewis E, Little C. Mater. Des. 2015, 66, 93–102.10.1016/j.matdes.2014.10.038Search in Google Scholar

[2] Arai M, Hirokawa JI, Hanamura Y, Ito H, Hojo M, Quaresimin M. Compos. Part B 2014, 65, 26–33.10.1016/j.compositesb.2014.02.025Search in Google Scholar

[3] Kamiya R, Cheeseman BA, Popper P, Chou T-W. Compos. Sci. Technol. 2000, 60, 33–47.10.1016/S0266-3538(99)00093-7Search in Google Scholar

[4] Mouritz A, Bannister M, Falzon P, Leong K. Compos. Part A 1999, 30, 1445–1461.10.1016/S1359-835X(99)00034-2Search in Google Scholar

[5] Cartié DDR, Laffaille JM, Partridge IK, Brunner AJ. Eng. Fract. Mech. 2009, 76, 2834–2845.10.1016/j.engfracmech.2009.07.018Search in Google Scholar

[6] Lee DJ, Palley I. J. Compos. Mater. 2012, 46, 1357–1365.10.1177/0021998311418547Search in Google Scholar

[7] Tang Y, Ye L, Zhang D, Deng S. Compos. Part A 2011, 42, 1943–1950.10.1016/j.compositesa.2011.08.019Search in Google Scholar

[8] Ye Y, Chen H, Wu J, Chan CM. Compos. Sci. Technol. 2011, 71, 717–723.10.1016/j.compscitech.2011.01.018Search in Google Scholar

[9] Abali F, Pora A, Shivakumar K. J. Compos. Mater. 2003, 37, 453–464.10.1177/0021998303037005053Search in Google Scholar

[10] Xu H, Zhang L, Cheng L. Mater. Des. 2014, 64, 434–440.10.1016/j.matdes.2014.07.060Search in Google Scholar

[11] Bilisik K, Bilisik K. Text. Res. J. 2013, 83, 1414–1436.10.1177/0040517512450766Search in Google Scholar

[12] Sohn MS, Hu XZ. Scr. Metall. Mater. 1994, 30, 1467–1472.10.1016/0956-716X(94)90247-XSearch in Google Scholar

[13] Sohn MS, Hu XZ. Compos. Sci. Technol. 1998, 58, 211–220.10.1016/S0266-3538(97)00114-0Search in Google Scholar

[14] Huang BZ, Hu XZ, Liu J. Compos. Sci. Technol. 2004, 64, 2165–2175.10.1016/j.compscitech.2004.03.014Search in Google Scholar

[15] Kusaka T, Hojo M, Fukuoka T, Ishibashi M. J. Phys. IV 2006, 134, 1105–1111.10.1051/jp4:2006134169Search in Google Scholar

[16] Hojo M, Nakashima K, Kusaka T, Tanaka M, Adachi T, Fukuoka T, Ishibashi M. Int. J. Fatigue 2010, 32, 37–45.10.1016/j.ijfatigue.2009.02.025Search in Google Scholar

[17] Kusaka T, Watanabe K, Hojo M, Fukuoka T, Ishibashi M. Eng. Fract. Mech. 2012, 96, 433–446.10.1016/j.engfracmech.2011.10.015Search in Google Scholar

[18] Kusaka T, Watanabe K, Hojo M, Fukuoka T, Ishibashi M. Compos. Sci. Technol. 2009, 69, 2323–2330.10.1016/j.compscitech.2009.01.028Search in Google Scholar

[19] Chen T, Liao J, Liu G, Zhang F, Gong Q. Carbon 2003, 41, 993–999.10.1016/S0008-6223(02)00445-1Search in Google Scholar

[20] Fan S, Zhang L, Xu Y, Cheng L, Lou J, Zhang J, Yu L, Yuan Y, Zhang F, Tian G, Chen Z, Lou, J. Compos. Sci. Technol. 2007, 67, 2390–2398.10.1016/j.compscitech.2007.01.008Search in Google Scholar

[21] Cai Y, Fan S, Liu H, Zhang L, Cheng L, Dong B, Jiang J. Compos. Sci. Technol. 2009, 69, 2447–2453.10.1016/j.compscitech.2009.06.019Search in Google Scholar

[22] Hallal A, Younes R, Fardoun F, Nehme S. Compos. Struct. 2012, 94, 3009–3028.10.1016/j.compstruct.2012.03.019Search in Google Scholar

[23] Shekar KC, Prasad BA, Prasad NE. Procedia Mater. Sci. 2014, 6, 1336–1343.10.1016/j.mspro.2014.07.112Search in Google Scholar

[24] Koohbor B, Mallon S, Kidane A, Sutton MA. Compos. Part B 2014, 66, 388–399.10.1016/j.compositesb.2014.05.022Search in Google Scholar

[25] Lu G, Sun L, Matveev MY, Jones AI. Procedia Eng. 2015, 99, 349–352.10.1016/j.proeng.2014.12.546Search in Google Scholar

[26] Liu Y, Zhu J, Chen Z, Jiang Y. Ceram. Int. 2012, 38, 4245–4251.10.1016/j.ceramint.2012.01.083Search in Google Scholar

[27] Liu Y, Zhu J, Chen Z, Jiang Y, Li B, Lin L, Guan T, Cong X, Li C. Mater. Sci. Eng. A 2012, 532, 230–235.10.1016/j.msea.2011.10.084Search in Google Scholar

[28] Liu Y, Zhu J, Chen Z, Jiang Y, Li C, Li B, Lin L, Guan T, Chen Z. Ceram. Int. 2012, 38, 795–800.10.1016/j.ceramint.2011.08.006Search in Google Scholar

[29] Ahmed KS, Vijayarangan S. J. Mater. Process. Technol. 2008, 207, 330–335.10.1016/j.jmatprotec.2008.06.038Search in Google Scholar

[30] Xu H, Zhang L, Cheng L. Mater. Des. 2015, 67, 428–435.10.1016/j.matdes.2014.11.061Search in Google Scholar

[31] Cai Y, Xu Y, Li B, Fan S, Zhang L, Cheng L, Dong B, Jiang J. Mater. Sci. Eng.: A 2008, 497, 278–282.10.1016/j.msea.2008.07.011Search in Google Scholar

[32] Qi G, Zhang C, Hu H. Ceram. Int. 2007, 33, 891–894.10.1016/j.ceramint.2006.01.018Search in Google Scholar

[33] Ji A, Cui H, Li H, Cheng W, Ji L. New Carbon Mater. 2011, 26, 109–116.10.1016/S1872-5805(11)60070-XSearch in Google Scholar

Received: 2016-1-26
Accepted: 2016-5-19
Published Online: 2016-9-14
Published in Print: 2017-3-1

©2017 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 7.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2016-0029/html
Scroll to top button