Article
Publicly Available
Frontmatter
Published/Copyright:
March 3, 2017
Published Online: 2017-3-3
Published in Print: 2017-3-1
©2017 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
Articles in the same Issue
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
