The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
-
Satheesh Chandran
Abstract
This work demonstrates a novel simple method to study the accurate real time optical transparency of a crosslinked polymer blend during its swelling in good solvent. Heterogeneous natural rubber (NR) and poly (ethylene-co-vinyl acetate) (EVA) blends were used for this experiment. Aromatic solvents such as benzene, toluene and xylene were used as the probe molecules. Optical transparency of the samples increases with increase in EVA content in the blends during swelling. The penetrant solvent molecular size also affects the optical transparency of the blends. This new method can effectively measure the optical transparency of polymer gels during their swelling. Also, these blends can be a promising material for optical switching.
References
[1] Haraguchi K, Li H-J, Song L, Murata K. Macromolecules 2007, 40, 6973–6980.10.1021/ma071348iSuche in Google Scholar
[2] Toyotama A, Sawada T, Yamanaka J, Kitamura K. Langmuir 2006, 22, 1952–1954.10.1021/la052395bSuche in Google Scholar
[3] Bae YH, Huh KM, Kim Y, Park K-H. J. Controlled Release 2000, 64, 3–13.10.1016/S0168-3659(99)00126-1Suche in Google Scholar
[4] Gulsen D, Chuhan A. J. Membr. Sci. 2006, 269, 35–48.10.1016/j.memsci.2005.06.024Suche in Google Scholar
[5] Tang Y, Lu JR, Lewis AL, Vick TA, Stratford PW. Macromolecules 2001, 34, 8768–8776.10.1021/ma010476iSuche in Google Scholar
[6] Takahashi S, Okada H, Nobukawa S, Yamaguchi M. Eur. Polym. J. 2012, 48, 974–980.10.1016/j.eurpolymj.2012.02.009Suche in Google Scholar
[7] Cemek B, Demir Y. Polym. Test. 2005, 24, 284–289.10.1016/j.polymertesting.2004.11.007Suche in Google Scholar
[8] Yildiz Y, Hepuzer Y, Yagci, Y, Pekcan O. Eur. Polym. J. 2002, 38, 1591–1599.10.1016/S0014-3057(02)00050-2Suche in Google Scholar
[9] Sujith A, Unnikrishnan G. J. Polym. Res. 2006, 13, 171–180.10.1007/s10965-005-9021-ySuche in Google Scholar
[10] Sujith A, Radhakrishnan CK, Unnikrishnan G, Thomas S. J. Appl. Polym. Sci. 2003, 90, 2691–2702.10.1002/app.12923Suche in Google Scholar
©2017 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
