Startseite Studies on thin films of PVC-PMMA blend polymer electrolytes
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Studies on thin films of PVC-PMMA blend polymer electrolytes

  • Mohammad Saleem Khan EMAIL logo , Rahmat Gul und Mian Sayed Wahid
Veröffentlicht/Copyright: 7. August 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Journal of Polymer Engineering
Aus der Zeitschrift Journal of Polymer Engineering Band 33 Heft 7

Abstract

Thin films of poly (vinyl chloride) (PVC)/poly (methyl methacrylate) (PMMA) blend polymers complexed with different concentrations of LiClO4 salt, containing ethylene carbonate (EC) as the plasticizer, were fabricated by the solution cast procedure. Ionic conductivity, thermal stability and X-ray diffraction (XRD) studies were undertaken. AC impedance measurements were done in the temperature range of 20–70°C. The highest ionic conductivity at room temperature was found to be 2.23×10-5 S cm-1 for the sample containing 15 wt% of LiClO4 salt. The XRD technique was used to investigate the structure and complex formation of solid polymer electrolytes. There was a decrease in degree of crystallinity. The amorphous nature of complexed solid polymer blend electrolyte films increased, due to the addition of LiClO4 salt. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) revealed the effect of salt on the thermal stability of the polymer electrolytes. It was found that these polymer electrolyte systems show stability up to about 280°C. It was also found that, with increased LiClO4 salt content in complexed polymer electrolyte systems, the degradation temperature decreased.

Keywords: impedance spectroscopy; ionic conductivity; plasticizer; poly (methyl methacrylate); poly (vinyl chloride); polymer electrolytes
Corresponding author: Mohammad Saleem Khan, Polymer Chemistry Laboratory, National Center of Excellence in Physical Chemistry, University of Peshawar, Peshawar 25120, Pakistan, e-mail:

R.G. acknowledges the financial funding by the Higher Education Commission of Pakistan under the indigenous fellowship program.

References

[1] Ratner MA, MacCullum JR, Vincent CA, Eds., Polymer Electrolytes-I, Elsevier: London, 1987.Suche in Google Scholar

[2] Bruce PG, Vincent CA. J. Chem. Soc. Farad. Trans. 1993, 89, 3187–3203.Suche in Google Scholar

[3] Croce F, Capuano F, Selvaggi A, Scrosati B, Scibona G. J. Power Sources 1990, 32, 381–389.10.1016/0378-7753(90)87006-DSuche in Google Scholar

[4] Capuano F, Croce F, Scrosati B. J. Electrochem. Soc. 1991, 138, 1918–1922.Suche in Google Scholar

[5] Wright PV. Br. Polymer. J. 1975, 7, 319–327.Suche in Google Scholar

[6] Feuillade G, Perche Ph. J. Appl. Electrochem. 1975, 5, 63–69.Suche in Google Scholar

[7] Watanabe M, Kanba M, Matusuda H, Tsunemi K, Mizoguchi K, Tsuchide E, Shinohara I. Macromol. Chem. Rapid Commun. 1981, 2, 741–744.Suche in Google Scholar

[8] Croce F, Gerace F, Dautzemberg G, Passerini S, Appetecchi GB, Scrosati B. Electrochim. Acta 1994, 39, 2187–2194.10.1016/0013-4686(94)E0167-XSuche in Google Scholar

[9] Abraham KM, Alamgir M. J. Power Sources 1993, 43, 195–208.10.1016/0378-7753(93)80115-6Suche in Google Scholar

[10] MacCullum JR, Vincent CA. Polymer Electrolyte Reviews 1, Elsevier Science Publishers: London, 1987.Suche in Google Scholar

[11] Alamgir M, Abraham KM. J. Electrochem. Soc. 1993, 140, L96–L97.Suche in Google Scholar

[12] Tsunemi K, Ohno H, Tsuchida E. Electrochim. Acta 1983, 28, 833–837.10.1016/0013-4686(83)85155-XSuche in Google Scholar

[13] Abraham KM, Alamgir M. Solid Electrolytes, U.S. Patent Number 5,219,679 (1993).Suche in Google Scholar

[14] Hong H, Liquan C, Xuejie H, Rongjian X. Electrochim. Acta 1992, 37, 1671–1673.10.1016/0013-4686(92)80135-9Suche in Google Scholar

[15] Peramunage D, Pasquariello DM, Abraham KM. J. Electrochem. Soc. 1995, 142, 1789–1798.Suche in Google Scholar

[16] Bohnke O, Frand G, Rezrazi M, Rousselot C, Truche C. Solid State Ionics 1993, 66, 97–104.10.1016/0167-2738(93)90032-XSuche in Google Scholar

[17] Rhoo HJ, Kim HT, Jung-ki P, Hwang TS. Electrochim. Acta 1997, 42, 1571–1579.10.1016/S0013-4686(96)00318-0Suche in Google Scholar

[18] Michael MS, Jacob MME, Prabaharan SRS, Radhakrishna S. Solid State Ionics 1997, 98, 167–174.10.1016/S0167-2738(97)00117-3Suche in Google Scholar

[19] Stephan AM, Kumar PT, Renganathan NG, Pitchumani S, Thirunakaran R, Muniyandi N. J. Power Sources 2000, 89, 80–87.10.1016/S0378-7753(00)00379-7Suche in Google Scholar

[20] Armand MB, Chabagno JM, Duclot MJ. In Fast Ion Transport in Solids, Vashishta P, Mundy JN, Shenoy GK, Eds., North-Holland: New York, 1979, p 131.Suche in Google Scholar

[21] Subba Reddy ChV, Zhu QY, Mai Li-Q, Chen W. J. Appl. Electrochem. 2006, 36, 1051–1056.Suche in Google Scholar

[22] Souquet JL, Levy M, Duclot M. Solid State Ionics 1994, 70/71, 337–345.10.1016/0167-2738(94)90333-6Suche in Google Scholar

[23] Ramesh S, Arof AK. Mater. Sci. Eng. B 2001, 85, 11–15.10.1016/S0921-5107(01)00555-4Suche in Google Scholar

Received: 2013-2-6
Accepted: 2013-7-5
Published Online: 2013-08-07
Published in Print: 2013-10-01

©2013 by Walter de Gruyter Berlin Boston

Artikel in diesem Heft

  1. Masthead
  2. Masthead
  3. Original articles
  4. Degradation of epoxidized natural rubber compatibilized linear low density polyethylene/ soya powder blends: the effect of natural weathering
  5. Effect of compatibilizing agents on the physical properties of iPP/HDPE organoclay blends
  6. Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends
  7. Effect of MMT concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites
  8. Three-dimensional viscoelastic simulation of the effect of wall slip on encapsulation in the coextrusion process
  9. Studies on thin films of PVC-PMMA blend polymer electrolytes
  10. Morphological study of PVDF/PMMA/TiO2 blend films prepared by melt casting process
  11. Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties
  12. Preparation of poly(sebacic anhydride) and polylactic acid pills used as drug carrier for levofloxacin controlled release
  13. Gray optimization of process parameters of surface modification of coconut sheath reinforced polymer composites
https://doi.org/10.1515/polyeng-2013-0028
Schlagwörter für diesen Artikel
impedance spectroscopy; ionic conductivity; plasticizer; poly (methyl methacrylate); poly (vinyl chloride); polymer electrolytes

Artikel in diesem Heft

  1. Masthead
  2. Masthead
  3. Original articles
  4. Degradation of epoxidized natural rubber compatibilized linear low density polyethylene/ soya powder blends: the effect of natural weathering
  5. Effect of compatibilizing agents on the physical properties of iPP/HDPE organoclay blends
  6. Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends
  7. Effect of MMT concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites
  8. Three-dimensional viscoelastic simulation of the effect of wall slip on encapsulation in the coextrusion process
  9. Studies on thin films of PVC-PMMA blend polymer electrolytes
  10. Morphological study of PVDF/PMMA/TiO2 blend films prepared by melt casting process
  11. Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties
  12. Preparation of poly(sebacic anhydride) and polylactic acid pills used as drug carrier for levofloxacin controlled release
  13. Gray optimization of process parameters of surface modification of coconut sheath reinforced polymer composites
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2013-0028/pdf
Button zum nach oben scrollen