Amorphous Phases in Materials Microstructure
-
,
Abstract
Formation of a “constrained liquid” as the boundary film with a constant thickness and segregation of the surplus “free liquid” into the joint pockets in the microstructure of the liquid-phase sintered ceramics has been ascribed to an additional interaction in the system. The parallel tangent construction has been derived as condition of true thermodynamic equilibrium between the constrained and the free liquid. Similarly constrained equilibrium has been considered for amorphous boundary phase and suggested as possible explanation of its apparent stability.
-
The authors would like to express their gratitude to the organizers and financial sponsors of a wonderful workshop.
References
1 Kleebe, H.J.: J. Ceram. Soc. Jpn. 105 (1997) 453.10.2109/jcersj.105.453Search in Google Scholar
2 Rühle, M.: Adv. Mater. 9 (1997) 195.10.1002/adma.19970090304Search in Google Scholar
3 Bobeth, M., Clarke, D.R.; Pompe, W. A.: J. Am. Ceram. Soc. 82 (1999) 1537.10.1111/j.1151-2916.1999.tb01952.xSearch in Google Scholar
4 Hillert, M.: Phase Equlibria, Phase Diagrams and Phase Transformations, University Press, Cambridge (1998) 392.Search in Google Scholar
5 Grujicic, M.: CALPHAD 13 (1989) 205.10.1016/0364-5916(89)90020-5Search in Google Scholar
6 Ågren, J.; Clavaguera-Mora, M.T.; Golczewski, J.; Inden, G.; Kumar, H.; Sigli C.: CALPHAD 24 (2000) 41.10.1016/S0364-5916(00)00014-6Search in Google Scholar
7 Ackler, H. D.; Chaing, Y.M.: J. Am. Ceram. Soc. 80 (1997) 1893.10.1111/j.1151-2916.1997.tb03068.xSearch in Google Scholar
8 Golczewski, J.; Seifert, H.J.; Aldinger, F.: Z. Metallkd., in press.Search in Google Scholar
9 Clarke, D. R.: J. Am. Ceram. Soc. 70 (1987) 15.10.1111/j.1151-2916.1987.tb04846.xSearch in Google Scholar
© 2001 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Editorial
- In memoriam
- The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
- Aufsätze/Articles
- Using Ab Initio Calculations in the Calphad Environment
- Contributions to the Thermodynamic Modelling of Solutions
- Thermodynamic Modelling of Oxide and Oxynitride Phases
- The Modelling of Carbide, Nitride and Carbo-Nitride Phases
- Amorphous Phases in Materials Microstructure
- Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
- Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
- Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
- The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
- Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
- Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
- Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
- Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
- Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
- Mitteilungen/Notifications
- Personelles/Personal
- Bücher/Books
- Tagungen/Conferences
Articles in the same Issue
- Frontmatter
- Editorial
- In memoriam
- The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
- Aufsätze/Articles
- Using Ab Initio Calculations in the Calphad Environment
- Contributions to the Thermodynamic Modelling of Solutions
- Thermodynamic Modelling of Oxide and Oxynitride Phases
- The Modelling of Carbide, Nitride and Carbo-Nitride Phases
- Amorphous Phases in Materials Microstructure
- Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
- Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
- Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
- The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
- Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
- Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
- Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
- Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
- Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
- Mitteilungen/Notifications
- Personelles/Personal
- Bücher/Books
- Tagungen/Conferences
