Startseite Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Characteristics of Mechanical Alloying of Zn–Al-Based Alloys

  • Y. H. Zhu EMAIL logo , A. Perez Hernandez und W. B. Lee
Veröffentlicht/Copyright: 8. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 92 Heft 6

Abstract

Three pure elemental powder mixtures of Zn–22%Al – 18 %Cu, Zn–5 %Al–11 %Cu, and Zn–27%Al –3%Cu (in wt.%) were mechanically alloyed by steel-ball milling processing. The mechanical alloying characteristics were investigated using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. It was explored that mechanical alloying started with the formation of phases from pure elemental powders, and this was followed by mechanical milling-induced phase transformation. During mechanical alloying, phases stable at the higher temperatures formed at the near room temperature of milling. Nano-structure Zn–Al-based alloys were produced by mechanical alloying.

Keywords: Mechanical alloying; Tensile deformation; Stress-induced phase transformation; Zn–Al alloys
Dr. Y. H. Zhu IIM, UNAM Apartado Postal 70-360 Mexico D.F. 04510, Mexico Fax: +52 5 616 1371

  1. The authors would like to express their thanks to L. Banos, T. S. Zhang, A. Caballero, and J. Guzman for their assistance in the experimental work, also to the DGAPA de UNAM, and the research committee of the Hong Kong Polytechnic University (Project No. G-YY11) for financial support. Part of the experimental work was carried out in ESIQIE, IPN, to which the authors would like to express their gratefulness.

References

1 Shingu, P.H. (ed.): Proc. Int. Symp. on Mechanical Alloying (Kyoto, Japan, 1991) in Mater. Sci. Forum 88/90 (1992).Suche in Google Scholar

2 Koch, C.C.; Cavin, O.B.; McKamey, C.G.; Scarbrough, J.O.: Appl. Phy. Lett. 43 (1983) 1017.10.1063/1.94213Suche in Google Scholar

3 Schwarz, R.B.; Koch, C.C.: Appl. Phys. Lett. 9 (1986) 146.10.1063/1.97206Suche in Google Scholar

4 Yermakov, A.E.; Yurchikov, E.E.; Barinov, V.A.: Fiz. Metal. Metalloved. 52 (1981) 1184.Suche in Google Scholar

5 Schwarz, R.B.; Petrich, R.R.; Saw, C.K.: J. Non-Cryst. Solids 76 (1985) 281.10.1016/0022-3093(85)90005-5Suche in Google Scholar

6 Schwarz, R.B.; Johnson, W.L.: Phys. Rev. Lett. 51 (1983) 415.10.1103/PhysRevLett.51.415Suche in Google Scholar

7 Simerska, M.; Synnecek, Y.: Acta metall. 15 (1967) 223.10.1016/0001-6160(67)90195-2Suche in Google Scholar

8 Anantharaman, T.R.; Ramas, V.; Bulter, E.P.: J. Mater. Sci. 9 (1974) 240.10.1007/BF00550947Suche in Google Scholar

9 Murphy, S.: Metal Sci. 9 (1975) 163.10.1179/030634575790444414Suche in Google Scholar

10 Zhu, Y.H.; Murphy, S.: J. Mater. Sci. Technol. 2 (1986) 841.10.1179/mst.1986.2.8.841Suche in Google Scholar

11 Zhu, Y.H.; Huang, W.; Yan, B.: Shanghai Metals (Nonferrous Fascicule) 9 (1988) 1.Suche in Google Scholar

12 Zhu, Y.H.: J. Mater. Sci. Technol. 5 (1989) 113.Suche in Google Scholar

13 Zhu, Y.H.; Huang, W.J.: Casting 7 (1990) 25.Suche in Google Scholar

14 Zhu, Y.H.: J. Mater. Res. 11 (1996) 593.10.1557/JMR.1996.0072Suche in Google Scholar

15 Zhu, Y.H.; Torres, J.: Z. Metallkd. 88 (1997) 329.Suche in Google Scholar

16 Zhu, Y.H.: Metals and Mater. 4 (1998) 878.10.1007/BF03026416Suche in Google Scholar

17 Zhu, Y.H.: J. Mater. Sci. Technol. 6 (1990) 125.10.1179/mst.1990.6.12.1193Suche in Google Scholar

18 Zhu, Y.H.; Hernandez Flores, R.M.; Banos, L.: J. Mater. Sci. 34 (1999) 1.10.1023/A:1004424401427Suche in Google Scholar

19 Ciach, R.; Dukiet-Zawedzka, B.; Ciach, T.D.: J. Mater. Sci. 13 (1978) 2676.10.1007/BF02402755Suche in Google Scholar
Received: 2000-06-25
Published Online: 2022-01-08

© 2001 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. In memoriam
  4. The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
  5. Aufsätze/Articles
  6. Using Ab Initio Calculations in the Calphad Environment
  7. Contributions to the Thermodynamic Modelling of Solutions
  8. Thermodynamic Modelling of Oxide and Oxynitride Phases
  9. The Modelling of Carbide, Nitride and Carbo-Nitride Phases
  10. Amorphous Phases in Materials Microstructure
  11. Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
  12. Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
  13. Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
  14. The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
  15. Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
  16. Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
  17. Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
  18. Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
  19. Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
  20. Mitteilungen/Notifications
  21. Personelles/Personal
  22. Bücher/Books
  23. Tagungen/Conferences
https://doi.org/10.3139/ijmr-2001-0112
Schlagwörter für diesen Artikel
Mechanical alloying; Tensile deformation; Stress-induced phase transformation; Zn–Al alloys

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. In memoriam
  4. The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
  5. Aufsätze/Articles
  6. Using Ab Initio Calculations in the Calphad Environment
  7. Contributions to the Thermodynamic Modelling of Solutions
  8. Thermodynamic Modelling of Oxide and Oxynitride Phases
  9. The Modelling of Carbide, Nitride and Carbo-Nitride Phases
  10. Amorphous Phases in Materials Microstructure
  11. Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
  12. Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
  13. Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
  14. The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
  15. Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
  16. Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
  17. Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
  18. Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
  19. Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
  20. Mitteilungen/Notifications
  21. Personelles/Personal
  22. Bücher/Books
  23. Tagungen/Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 18.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2001-0112/html
Button zum nach oben scrollen