Article
Publicly Available
Frontmatter
Published/Copyright:
January 8, 2022
Published Online: 2022-01-08
© 2001 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Editorial
- In memoriam
- The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
- Aufsätze/Articles
- Using Ab Initio Calculations in the Calphad Environment
- Contributions to the Thermodynamic Modelling of Solutions
- Thermodynamic Modelling of Oxide and Oxynitride Phases
- The Modelling of Carbide, Nitride and Carbo-Nitride Phases
- Amorphous Phases in Materials Microstructure
- Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
- Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
- Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
- The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
- Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
- Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
- Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
- Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
- Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
- Mitteilungen/Notifications
- Personelles/Personal
- Bücher/Books
- Tagungen/Conferences
Articles in the same Issue
- Frontmatter
- Editorial
- In memoriam
- The Ringberg Workshop 1999 on Thermodynamic Modelling and Applications
- Aufsätze/Articles
- Using Ab Initio Calculations in the Calphad Environment
- Contributions to the Thermodynamic Modelling of Solutions
- Thermodynamic Modelling of Oxide and Oxynitride Phases
- The Modelling of Carbide, Nitride and Carbo-Nitride Phases
- Amorphous Phases in Materials Microstructure
- Experimental and Theoretical Study of the Al-Rich Corner in the Ternary Al–Ti–B System and Reassessment of the Al-Rich Side of the Binary Al–B Phase Diagram
- Evaluation of Superplastic Formability of the AZ31 Magnesium Alloy
- Characteristics of Mechanical Alloying of Zn–Al-Based Alloys
- The Effect of Sputter Cleaning and TiN Coating after Sputter Cleaning on Tensile and Fatigue Behavior of a Nodular Cast Iron
- Nucleation of Iron Nitrides during Gaseous Nitriding of Iron; Effect of a Preoxidation Treatment
- Structure Formation of Activated Nickel Catalyst During Caustic Leaching of a Nickel–Aluminium Alloy
- Experimental Study on the Electrical Conductivity and Thermo-Electromotive Force of Liquid Pb–Mg-Based Alloys
- Interfacial Reactions between the Aluminium Alloy Matrix and Intermetallic Reinforcement Particles in Novel P/M 5056/Ni3Alp Composites
- Microstructure and Devitrification Behavior of Melt-Spun Al-Rich Metallic Glasses and Nanostructured Composites
- Mitteilungen/Notifications
- Personelles/Personal
- Bücher/Books
- Tagungen/Conferences