Investigation into the Differences in the Selective Laser Sintering between Amorphous and Semi-crystalline Polymers

References

Beaman, J. J.et al.: Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Boston (1997)10.1007/978-1-4615-6327-3Suche in Google Scholar

Caulfield, B., et al., “Dependence of Mechanical Properties of Polyamide Components on Build Parameters in the SLS Process”, Journal of Materials Processing Technology, 182, 477–488(2007), DOI: 10.1016/j.jmatprotec.2006.09.007Suche in Google Scholar

Childs, T. H. C., et al., “Selective Laser Sintering of an Amorphous Polymer-Simulations and Experiments”, Proceedings of the Institution of Mechanical Engineers Part B: J. Engineering Manufacturing, 213, 333–349(1999)10.1243/0954405991516822Suche in Google Scholar

Chung, H., Das, S., “Processing and Properties of Glass Bead Particulate-filled Functionally Graded Nylon-11 Composites Produced by Selective Laser Sintering”, Mat. Sci. Eng. A-Struct., 437, 226–234(2006)10.1016/j.msea.2006.07.112Suche in Google Scholar

Chung, H., Das, S., “Functionally Graded Nylon-11/Silica Nanocomposites Produced by Selective Laser Sintering”, Mat. Sci. Eng. A-Struct., 487, 251–257(2008)10.1016/j.msea.2007.10.082Suche in Google Scholar

Deckard, C. R. “Part Generation by Layerwise Selective Sintering”, MS Thesis, University of Texas, Austin, TX (1986)Suche in Google Scholar

Fan, K. M., et al., “Movement of Powder Bed Material during the Selective Laser Sintering of Bisphenol-A Polycarbonate”, Rapid Prototyping Journal, 11, 188–198(2005), DOI: 10.1108/13552540510612884Suche in Google Scholar

Fiedler, L., et al., “Evaluation of Polypropylene Powder Grades in Consideration of Laser Sintering Processability”, Int. J. Plast. Technol., 3, 1–14(2007)Suche in Google Scholar

Frenkel, J. J., “Viscous Flow of Crystalline Bodies under the Action of Surface Tension”, J. Phys. (USSR), 9, 385–396(1945)Suche in Google Scholar

Gibson, I., Shi, D. P., “Material Properties and Fabrication Parameters in Selective Laser Sintering Process”, Rapid Prototyping Journal, 3, 129–136(1997), DOI: 10.1108/13552549710191836Suche in Google Scholar

Gill, T. J., Hon, K. K. B., “Experimental Investigation into the Selective Laser Sintering of Silicon Carbide Polyamide Composites”, P. I. Mech. Eng. B-J. Eng., 218, 1249–1256(2004)10.1243/0954405042323487Suche in Google Scholar

Ho, H. C. H., et al., “Effects of Energy Density on Morphology and Properties of Selective Laser Sintered Polycarbonate”, J. Mater. Process. Technol., 89–90, 204–210(1999), DOI: 10.1016/S0924-0136(99)00007-2Suche in Google Scholar

Ho, H. C. H., et al., “Effects of Graphite Powder on the Laser Sintering Behaviour of Polycarbonate”, Rapid Prototyping Journal, 8, 233–242(2002), DOI: 10.1108/13552540210441148Suche in Google Scholar

Ho, H. C. H., et al., “Morphology and Properties of Selective Laser Sintered Bisphenol A Polycarbonate”, Ind. Eng. Chem. Res., 42, 1850–1862(2003), DOI: 10.1021/ie0206352Suche in Google Scholar

Hao, L., et al., “Selective Laser Sintering of Hydroxyapatite Reinforced Polyethylene Composites for Bioactive Implants and Tissue Scaffold Development”, Proceedings of the Institution of Mechanical Engineers Part H: J. Engineering in Medicine, 220, 521–531(2006), DOI: 10.1243/09544119JEIM67Suche in Google Scholar PubMed

Kim, J., Creasy, T. S., “Selective Laser Sintering Characteristics of Nylon 6/clay-reinforced Nanocomposite”, Polym. Test., 23, 629–636(2004)., DOI: 10.1016/j.polymertesting.2004.01.014Suche in Google Scholar

Kruth, J. P., et al., “Lasers and Materials in Selective Laser Sintering”, Rapid Prototyping Journal, 23, 357–371(2003)Suche in Google Scholar

Kumar, S., “Selective Laser Sintering: A Qualitative and Objective Approach”, JOM-Journal of the Minerals Metals & Materials Society, 55, 43–47(2003)10.1007/s11837-003-0175-ySuche in Google Scholar

Mazzoli, A., Met al., “Characterization of an Aluminum-filled Polyamide Powder for Applications in Selective Laser Sintering”, Mater. Des., 28, 993–1000(2007), DOI: 10.1016/j.matdes.2005.11.021Suche in Google Scholar

Nelson, J. C., Selective Laser Sintering: A Definition of the Process and an Empirical Sintering Model. Ph.D. Thesis, University of Texas at Austin, Austin (1993)Suche in Google Scholar

Nelson, J. C., et al., “Model of the Selective Laser Sintering of Bisphenol-A Polycarbonate”, Ind. Eng. Chem. Res., 32, 2305–2317(1993), DOI: 10.1021/ie00022a014Suche in Google Scholar

Pham, D. T., et al., “Selective Laser Sintering: Applications and Technological Capabilities”, Proceedings of the Institution of Mechanical Engineers Part B: J. Engineering Manufacturing, 213, 435–449(1999)10.1243/0954405991516912Suche in Google Scholar

Savalani, M. M., et al., “Evaluation of CO2 and Nd:YAG Lasers for the selective Laser Sintering of HAPEX®”, Proceedings of the Institution of Mechanical Engineers Part B: J. Engineering Manufacture, 220, 171–182(2006)10.1243/095440505X32986Suche in Google Scholar

Shi, Y. S., et al., “Development of a Polymer Alloy Of Polystyrene (PS) and Polyamide (PA) for Building Functional Part Based on Selective Laser Sintering (SLS)”, Proc. Inst. Mech. Eng. Part L J. Mat. Des. Appl., 218, 299–306(2004)10.1243/0954409043125905Suche in Google Scholar

Shi, Y. S., et al., “Experimental investigation into the Selective Laser Sintering of High-impact Polystyrene”, J. Appl. Polym. Sci., 108, 535–540(2008), DOI: 10.1002/app.27686Suche in Google Scholar

Shi, Y. S., et al., “Study of the Selective Laser Sintering of Polycarbonate and Postprocess for Parts Reinforcement”, Proc. Inst. Mech. Eng. Part. L J. Mat. Des. Appl., 221, 37–42(2007)10.1243/09544100JAERO100Suche in Google Scholar

Schmidt, M., et al., “Selective Laser Sintering of PEEK”, CIRP Annals – Manufacturing Technology, 56, 205–208(2007)10.1016/j.cirp.2007.05.097Suche in Google Scholar

Subramanian, K., et al., “Selective Laser Sintering of Alumina with Polymer Binders”, Rapid Prototyping Journal, 1, 24–35(2005), DOI: 10.1108/13552549510086844Suche in Google Scholar

Tan, K. H., et al., “Scaffold Development Using Selective Laser Sintering of Polyetheretherketone-hydroxyapatite Biocomposite Blends”, Biomaterials, 24, 3115–3123(2003), DOI: 10.1016/S0142-9612(03)00131-5Suche in Google Scholar

Tan, K. H., et al., “Selective Laser Sintering of Biocompatible Polymers For Applications In Tissue Engineering”, Bio-medical Materials and Engineering, 15, 113–124(2005), DOI: PMid:15623935Suche in Google Scholar

Tontowi, A. E., Childs, T. H. C., “Density Prediction of Crystalline Polymer Sintered Parts at Various Powder Bed Temperatures”, Rapid Prototyping Journal, 7, 180–184(2001), DOI: 10.1108/13552540110395637Suche in Google Scholar

Wagner, T., et al., “Laser Sintering of High Temperature Resistant Polymers with Carbon Black Additives”, Int. Polym. Proc., 4, 395–401(2004)Suche in Google Scholar

Wang, Y., Study on the Polymer Materials of Selective Laser Sintering and the Properties of Sintered Parts, Ph.D. Thesis, Huazhong University of Science and Technology, Wuhan (2005)Suche in Google Scholar

Wang, Y., et al., “Selective Laser Sintering of Polyamide-rectorite Composite”, P. I. Mech. Eng. L-J. Mat., 219, 11–15(2005)Suche in Google Scholar

Yan, C. Z., et al., “A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering”, J. Reinf. Plast. Compos., 28, 2889–2902(2009a), DOI: 10.1177/0731684408094062Suche in Google Scholar

Yan, C. Z., et al., “Preparation and Selective Laser Sintering of Nylon-12 Coated Aluminum Powders”, J. Compos. Mater., 43, 1835–1851(2009b), DOI: 10.1177/0021998309340932Suche in Google Scholar

Yan, C. Z., et al., “Investigation into the Selective Laser Sintering of Styrene-acrylonitrile Copolymer and Postprocessing”, Int. J. Adv. Manuf. Technol., 51, 973–982(2010), DOI: 10.1007/s00170-010-2681-8Suche in Google Scholar

Yang, J. S., et al., “Selective Laser Sintering of HIPS and Investment Casting Technology”, J. Mater. Process. Technol., 209, 1901–1908(2009), DOI: 10.1016/j.jmatprotec.2008.04.056Suche in Google Scholar

Zheng, H. Z., et al., “Effect of Core–shell Composite Particles on the Sintering Behavior and Properties of Nano-Al₂O₃/Polystyrene Composite Prepared by SLS”. Mater. Lett., 60, 1219–1223(2006), DOI: 10.1016/j.matlet.2005.11.003Suche in Google Scholar

Zarringhalam, H., et al., “Effects of Processing on Microstructure and Properties of SLS Nylon 12”, Mat. Sci. Eng. A-Struct., 435–436, 172–180(2006)10.1016/j.msea.2006.07.084Suche in Google Scholar