Article
Licensed
Unlicensed
Requires Authentication
PPS News
Published/Copyright:
April 6, 2013
Published Online: 2013-04-06
Published in Print: 2011-09-01
© 2011, Carl Hanser Verlag, Munich
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Evaluation of Vacuum Venting for Micro-injection Molding
- Effect of Mechanical Milling on the Thermal Behavior of Polyethylene Reinforced with Nano-sized Alumina
- Preparation of Poly(acrylic acid)-Poly(ethylene oxide) Nanofibers via Electrospinning and Investigation of Their Morphology
- Concentration Effects of Organosilane (TESPD) on Mechanical Properties of Silica Filled Silicone Rubber/Natural Rubber Compounds
- Microcellular PP vs. Microcellular PP/MMT Nanocomposites: A Comparative Study of Their Mechanical Behavior
- Influence of Processing Conditions on Productivity, Thermal and Rheological Properties of Reprocessed Low Density Polyethylene
- Optimization of Dispersion of Nanosilica Particles in a PP Matrix and Their Effect on Foaming
- Paint/Polymer Interface Structure for ABS Injection Moldings
- Free Volume from Pressure and Temperature Dependent Viscosity and from PVT Measurements for Homo- and Copolymers
- Investigation into the Differences in the Selective Laser Sintering between Amorphous and Semi-crystalline Polymers
- Rheological Modeling and Dynamic Characteristics of Disc Extruders
- The Effect of Polymer Additives on Surface Quality of Microcellular Injection Molded Parts
- Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials
- Effect of Ionomer on Barrier and Mechanical Properties of PET/Organoclay Nanocomposites Prepared by Melt Compounding
- Rapid Communications
- Triangle Rule for Operating Windows and Scale-up Criteria for Volume Resistivity of PP/Carbon Nanotubes Composites
- Crystallization in Polymer Melts: Metamorphism of Flow Induced Nuclei
- PPS-News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Evaluation of Vacuum Venting for Micro-injection Molding
- Effect of Mechanical Milling on the Thermal Behavior of Polyethylene Reinforced with Nano-sized Alumina
- Preparation of Poly(acrylic acid)-Poly(ethylene oxide) Nanofibers via Electrospinning and Investigation of Their Morphology
- Concentration Effects of Organosilane (TESPD) on Mechanical Properties of Silica Filled Silicone Rubber/Natural Rubber Compounds
- Microcellular PP vs. Microcellular PP/MMT Nanocomposites: A Comparative Study of Their Mechanical Behavior
- Influence of Processing Conditions on Productivity, Thermal and Rheological Properties of Reprocessed Low Density Polyethylene
- Optimization of Dispersion of Nanosilica Particles in a PP Matrix and Their Effect on Foaming
- Paint/Polymer Interface Structure for ABS Injection Moldings
- Free Volume from Pressure and Temperature Dependent Viscosity and from PVT Measurements for Homo- and Copolymers
- Investigation into the Differences in the Selective Laser Sintering between Amorphous and Semi-crystalline Polymers
- Rheological Modeling and Dynamic Characteristics of Disc Extruders
- The Effect of Polymer Additives on Surface Quality of Microcellular Injection Molded Parts
- Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials
- Effect of Ionomer on Barrier and Mechanical Properties of PET/Organoclay Nanocomposites Prepared by Melt Compounding
- Rapid Communications
- Triangle Rule for Operating Windows and Scale-up Criteria for Volume Resistivity of PP/Carbon Nanotubes Composites
- Crystallization in Polymer Melts: Metamorphism of Flow Induced Nuclei
- PPS-News
- PPS News
- Seikei Kakou Abstracts
- Seikei-Kakou Abstracts
