Home Sixth of a Series: Pioneer of Man-Made Fibers and Solution Spinning Louis-Marie-Hilaire Bernigaud, Comte de Chardonnet
Article
Licensed
Unlicensed Requires Authentication

Sixth of a Series: Pioneer of Man-Made Fibers and Solution Spinning Louis-Marie-Hilaire Bernigaud, Comte de Chardonnet

  • J.L. White
Published/Copyright: June 6, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 15 Issue 1

Published Online: 2013-06-06
Published in Print: 2000-03-01

© 2000, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Editorial
  2. Sixth of a Series: Pioneer of Man-Made Fibers and Solution Spinning Louis-Marie-Hilaire Bernigaud, Comte de Chardonnet
  3. Screw Extrusion
  4. A Network Analysis of a Screw Mixing Zone
  5. Experimental and Numerical Study of Rhomboidal Mixing Sections
  6. Reactive Extrusion
  7. Bulk Polymerization of ∊-Caprolactone in Twin Screw Extruder
  8. Die Extrusion
  9. Computer Aided Optimisation of Profile Extrusion Dies
  10. Fibers and Films
  11. An Investigation of Venturi and Coanda Effects in Blown Film Cooling
  12. Blends
  13. Solidification Behaviour of PA6/iPP Blends at High Cooling Rates
  14. Polymer Blends with Fibrillar Phase Morphology Prepared by Self-Reinforcing Technique
  15. Molding
  16. Compressive Squeeze Flow of Generalized Newtonian Fluids with Apparent Wall Slip
  17. Comparative Study of Ziegler-Natta and Metallocene Based Polypropylenes in Injection Molding
  18. The Pressure-Volume-Temperature Behavior Polyethylene Melts
  19. Evaluation of the Thermal Behaviour of Injection Moulds
  20. Polymer Solidification under Pressure and High Cooling Rates
https://doi.org/10.3139/217.0001

Articles in the same Issue

  1. Editorial
  2. Sixth of a Series: Pioneer of Man-Made Fibers and Solution Spinning Louis-Marie-Hilaire Bernigaud, Comte de Chardonnet
  3. Screw Extrusion
  4. A Network Analysis of a Screw Mixing Zone
  5. Experimental and Numerical Study of Rhomboidal Mixing Sections
  6. Reactive Extrusion
  7. Bulk Polymerization of ∊-Caprolactone in Twin Screw Extruder
  8. Die Extrusion
  9. Computer Aided Optimisation of Profile Extrusion Dies
  10. Fibers and Films
  11. An Investigation of Venturi and Coanda Effects in Blown Film Cooling
  12. Blends
  13. Solidification Behaviour of PA6/iPP Blends at High Cooling Rates
  14. Polymer Blends with Fibrillar Phase Morphology Prepared by Self-Reinforcing Technique
  15. Molding
  16. Compressive Squeeze Flow of Generalized Newtonian Fluids with Apparent Wall Slip
  17. Comparative Study of Ziegler-Natta and Metallocene Based Polypropylenes in Injection Molding
  18. The Pressure-Volume-Temperature Behavior Polyethylene Melts
  19. Evaluation of the Thermal Behaviour of Injection Moulds
  20. Polymer Solidification under Pressure and High Cooling Rates
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 22.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.0001/html
Scroll to top button