Home ECAA 2011
Article
Licensed
Unlicensed Requires Authentication

ECAA 2011

  • John Banhart
Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 103 Issue 8

Published Online: 2013-06-11
Published in Print: 2012-08-01

© 2012, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. A new editor for IJMR and other changes
  5. ECAA 2011
  6. Proceeding Papers
  7. A model for co-clusters and their strengthening in Al–Cu–Mg based alloys: a comparison with experimental data
  8. Effect of room temperature storage time on precipitation in Al–Mg–Si(–Cu) alloys with different Mg/Si ratios
  9. Influence of Mg/Si ratio on the clustering kinetics in Al–Mg–Si alloys
  10. Effect of simultaneous deformation and artificial ageing on the mechanical properties of an Al–Mg–Si alloy
  11. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys
  12. The kinetics of clustering in Al–Mg–Si alloys studied by Monte Carlo simulation
  13. Regular Articles
  14. A physically based approach to model the incomplete bainitic transformation in high-Si steels
  15. Impact of interannealing on recrystallization during final annealing in twin-belt cast Al–Fe–Si sheet
  16. Direct preparation of ferrite magnetic material from Jinchuan nickel sulfide concentrate by acid leaching
  17. Effect of La3+ on microwave dielectric properties of (Pb1−xCax)(Fe0.5Nb0.5)O3 (x = 0.5–0.6) ceramics
  18. Thermodynamic properties of liquid copper–antimony–tin alloys determined from e.m.f. measurements
  19. Modelling of metal nano-particle condensation and growth in a reactive atmosphere
  20. Characterization and catalytic behavior of CuO@SiO2 nanocomposites towards NO oxidation and N2O decomposition
  21. Manufacturing process and electrochemical properties of an Mg–Ga–Hg anode sheet
  22. Effect of strain rate and dynamic strain ageing on work-hardening for aluminium alloy AA5182-O
  23. Steady-state creep analysis of a functionally graded thick cylinder subjected to internal pressure and thermal gradient
  24. Residual stress relaxation of hydroxyapatite/316L asymmetrical functionally gradient material fabricated by hot-pressing
  25. Strength and water permeability of concrete containing various types of fly ashes and filler material
  26. Comment to the paper “Re-evaluation of activities of magnesium and zinc components in the magnesium–zinc binary system from very low to high temperature”
  27. DGM News
  28. DGM News
https://doi.org/10.3139/146.810014

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. A new editor for IJMR and other changes
  5. ECAA 2011
  6. Proceeding Papers
  7. A model for co-clusters and their strengthening in Al–Cu–Mg based alloys: a comparison with experimental data
  8. Effect of room temperature storage time on precipitation in Al–Mg–Si(–Cu) alloys with different Mg/Si ratios
  9. Influence of Mg/Si ratio on the clustering kinetics in Al–Mg–Si alloys
  10. Effect of simultaneous deformation and artificial ageing on the mechanical properties of an Al–Mg–Si alloy
  11. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys
  12. The kinetics of clustering in Al–Mg–Si alloys studied by Monte Carlo simulation
  13. Regular Articles
  14. A physically based approach to model the incomplete bainitic transformation in high-Si steels
  15. Impact of interannealing on recrystallization during final annealing in twin-belt cast Al–Fe–Si sheet
  16. Direct preparation of ferrite magnetic material from Jinchuan nickel sulfide concentrate by acid leaching
  17. Effect of La3+ on microwave dielectric properties of (Pb1−xCax)(Fe0.5Nb0.5)O3 (x = 0.5–0.6) ceramics
  18. Thermodynamic properties of liquid copper–antimony–tin alloys determined from e.m.f. measurements
  19. Modelling of metal nano-particle condensation and growth in a reactive atmosphere
  20. Characterization and catalytic behavior of CuO@SiO2 nanocomposites towards NO oxidation and N2O decomposition
  21. Manufacturing process and electrochemical properties of an Mg–Ga–Hg anode sheet
  22. Effect of strain rate and dynamic strain ageing on work-hardening for aluminium alloy AA5182-O
  23. Steady-state creep analysis of a functionally graded thick cylinder subjected to internal pressure and thermal gradient
  24. Residual stress relaxation of hydroxyapatite/316L asymmetrical functionally gradient material fabricated by hot-pressing
  25. Strength and water permeability of concrete containing various types of fly ashes and filler material
  26. Comment to the paper “Re-evaluation of activities of magnesium and zinc components in the magnesium–zinc binary system from very low to high temperature”
  27. DGM News
  28. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 26.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.810014/html
Scroll to top button