DGM News

Articles in the same Issue

1. Frontmatter
2. Original Contributions
3. Microstructures of magnetron sputtered Fe–Au thin films
4. Phase-field simulation of diffusion-controlled coarsening kinetics of γ^’ phase in Ni–Al alloy
5. Structural and magnetic evolution of ball milled nanocrystalline Fe-50 at.% Al alloy
6. Structural, optical and magnetic properties of nanocrystalline zinc ferrite particles from glycine assisted combustion: Effect of Sr²⁺ dopant
7. Correlation of plastic deformation induced intermittent electromagnetic radiation characteristics with mechanical properties of Cu–Ni alloys
8. Effect of isothermal quenching methods on impact toughness and wear resistance in high boron steel
9. Wear behaviour of Al/(Al₂O₃ + ZrB₂ + TiB₂) hybrid composites fabricated by hot pressing
10. Regression analysis of bonding strength of sprayed coatings based on acoustic emission signal
11. Effect of substrates on covalent surface modification of graphene using photosensitive functional group
12. Short Communications
13. Investigation of optimum nucleation temperature and heating rate of cordierite glass-ceramics
14. The influence of process parameters on the preparation of CaF₂@Al(OH)₃ composite powder via heterogeneous nucleation
15. Effect of zirconium and heat treatment on the microstructure and properties of cast chromium bronze for conductive parts
16. The influence of addition of citric acid on the physical properties of metallic oxide nanorods via Sol-Gel route preparation
17. Notifications
18. People
19. DGM News
20. Conferences