Home Technology The influence of addition of citric acid on the physical properties of metallic oxide nanorods via Sol-Gel route preparation
Article
Licensed
Unlicensed Requires Authentication

The influence of addition of citric acid on the physical properties of metallic oxide nanorods via Sol-Gel route preparation

  • Zao Yang EMAIL logo , Fuquan Zhang , Quanhui Liu , Zhongwei Gu , Xingdong Zhang and Yunbin Wang
Published/Copyright: October 27, 2021
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 106 Issue 2

Abstract

ZnO nanorods of 25 – 100 nm in diameter and 0.2 – 1 lm in length were fabricated through a citric acid assisted annealing process. The nanorods were characterized by means of X-ray diffraction, field-emission scanning electron microscopy, fourier transform infrared spectroscopy spectrophotometry, ultraviolet visible spectroscopy and photoluminescence spectroscopy. The obtained ZnO nanorods have good crystal quality and excellent optical properties. The effects of addition of citric acid with Chirality Multi-acid Chemistry function on the optical properties of ZnO nanorods have been investigated.

Keywords: Nanostructures; Metallic oxide nanorods; Chemical synthesis; Sol–Gel preparation; ZnO
Associate Professor Zao Yang National Engineering Research Center for Biomaterials of Sichuan University 610064, Chengdu P. R. China Tel.: +86(0) 28 85410793 Fax: +86(0) 28 85410246

References

[1] Z.Y. Fan, J.G. Lu: J. Nanosci. Nanotechnol. 5 (2005) 1533. DOI:10.1166/jnn.2005.18210.1166/jnn.2005.182Search in Google Scholar PubMed

[2] P.D. Yang, H.Q. Yan, S. Mao, R. Russo, J. Johnson, R. Saykally, N. Morris, J. Pham, R.R.He, H.J. Choi: Adv. Funct. Mater. 12 (2002) 323. DOI:10.1002/1616-3028(20020517)12:5<323::AID-ADFM323>3.0.CO;2-G10.1002/1616-3028(20020517)12:5<323::AID-ADFM323>3.0.CO;2-GSearch in Google Scholar

[3] M.H. Huang, S. Mao, H. Feick, Y. Wu, H. Kind, H. Yan, E. Weber, R. Russo, P. Yang: Science 292 (2001) 1897. DOI:10.1126/science.106036710.1126/science.1060367Search in Google Scholar

[4] W.I. Park, Y.H. Jun, S.W. Jung, G.-C. Yi: Appl. Phys. Lett. 82 (2003) 964. DOI:10.1063/1.154405510.1063/1.1544055Search in Google Scholar

[5] A.B. Hartanto, X. Ning, Y. Nakata, T. Okada: Appl. Phys. A 78 (2003) 299. DOI:10.1007/s00339-003-2286-210.1007/s00339-003-2286-2Search in Google Scholar

[6] M. Guo, P. Diao, S. Cai: J. Solid State Chem. 178 (2005) 1864. DOI:10.1016/j.jssc.2004.10.01710.1016/j.jssc.2004.10.017Search in Google Scholar

[7] C. Liu, J.A. Zapien, Y. Yao, X. Meng, C.S. Lee, S. Fan, Y. Lifshitz, S.T. Lee: Adv. Mater. 15 (2003) 838. DOI:10.1002/adma.20030443010.1002/adma.200304430Search in Google Scholar

[8] Z. Yang, Q.H. Liu, L. Yang: Mater. Res. Bull. 42 (2007) 221. DOI:10.1016/j.materresbull.2006.04.03810.1016/j.materresbull.2006.04.038Search in Google Scholar

[9] M.A. Verges, A. Mifsud, C.J. Serna: J. Chem. Soc. Farady Trans. 86 (6) (1990) 959. DOI:10.1039/ft990860095910.1039/ft9908600959Search in Google Scholar

[10] F.A. Sigoli, M.R. Davolos, M. Jafelicci: J. Alloys Compd. 263/ 263 (1997) 292. DOI:10.1016/S0925-8388(97)00404-010.1016/S0925-8388(97)00404-0Search in Google Scholar

[11] H. Kleinwechter, C. Janzen, J. Knipping, H. Wiggers, P. Roth: J. Mater. Sci. 37 (2002) 4349. DOI:10.1023/A:102065662005010.1023/A:1020656620050Search in Google Scholar

[12] Y.C. Kong, D.P. Yu, B. Zhang, W. Fang, S.Q. Feng: Appl. Phys. Lett. 78 (2001) 407. DOI:10.1063/1.134205010.1063/1.1342050Search in Google Scholar

[13] Y.F. Chen, D.M. Bagnall, H.J. Koh, K.T. Park, K. Hiraga, Z.O. Zhu, T. Yao: J. Appl. Phys. 84 (1998) 3912. DOI:10.1063/1.36810510.1063/1.368105Search in Google Scholar

[14] W. Gopel, U. Lampe: Phys. Rev. B 22 (1980) 6447. DOI:10.1103/PhysRevB.22.644710.1103/PhysRevB.22.6447Search in Google Scholar

[15] S. Hong, T. Joo, W.I. Park, Y.H. Jun, G.-C. Yi: Appl. Phys. Lett. 83 (2003) 4157. DOI:10.1063/1.159775110.1063/1.1597751Search in Google Scholar

[16] W.P. Halperin: Rev. Modern Phys. 58 (1986) 533. DOI:10.1103/RevModPhys.58.53310.1103/RevModPhys.58.533Search in Google Scholar

[17] P.K. Samanta, S. Basak: Mater. Lett. 83 (2012) 97–99. DOI:10.1016/j.matlet.2012.05.13310.1016/j.matlet.2012.05.133Search in Google Scholar

[18] N. Karak, P.K. Samanta, T.K. Kundu: Optik-Int. J. Light Electr. Opt. 124 (23) (2013) 6227–6230. DOI:10.1016/j.ijleo.2013.05.01910.1016/j.ijleo.2013.05.019Search in Google Scholar

[19] P.K. Samanta, S. Mishra: Optik-Int. J. Light Electr. Opt. 124 (17) (2013) 2871–2873. DOI:10.1016/j.ijleo.2012.08.06610.1016/j.ijleo.2012.08.066Search in Google Scholar

[20] S. Shit, T. Kamilya, P.K. Samanta: Mater. Lett. 118 (2014) 123–125. DOI:10.1016/j.matlet.2013.12.06910.1016/j.matlet.2013.12.069Search in Google Scholar

[21] A.K. Bhunia, P.K. Samanta, S. Saha, T. Kamilya: Appl. Phys. Lett. 103 (14) (2013) 143701. DOI:10.1063/1.482402110.1063/1.4824021Search in Google Scholar

Received: 2014-02-02
Accepted: 2014-08-15
Published Online: 2021-10-27

© 2015 Carl Hanser Verlag GmbH & Co. KG

Articles in the same Issue

  1. Frontmatter
  2. Original Contributions
  3. Microstructures of magnetron sputtered Fe–Au thin films
  4. Phase-field simulation of diffusion-controlled coarsening kinetics of γ’ phase in Ni–Al alloy
  5. Structural and magnetic evolution of ball milled nanocrystalline Fe-50 at.% Al alloy
  6. Structural, optical and magnetic properties of nanocrystalline zinc ferrite particles from glycine assisted combustion: Effect of Sr2+ dopant
  7. Correlation of plastic deformation induced intermittent electromagnetic radiation characteristics with mechanical properties of Cu–Ni alloys
  8. Effect of isothermal quenching methods on impact toughness and wear resistance in high boron steel
  9. Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing
  10. Regression analysis of bonding strength of sprayed coatings based on acoustic emission signal
  11. Effect of substrates on covalent surface modification of graphene using photosensitive functional group
  12. Short Communications
  13. Investigation of optimum nucleation temperature and heating rate of cordierite glass-ceramics
  14. The influence of process parameters on the preparation of CaF2@Al(OH)3 composite powder via heterogeneous nucleation
  15. Effect of zirconium and heat treatment on the microstructure and properties of cast chromium bronze for conductive parts
  16. The influence of addition of citric acid on the physical properties of metallic oxide nanorods via Sol-Gel route preparation
  17. Notifications
  18. People
  19. DGM News
  20. Conferences
https://doi.org/10.3139/146.111157
Keywords for this article
Nanostructures; Metallic oxide nanorods; Chemical synthesis; Sol–Gel preparation; ZnO

Articles in the same Issue

  1. Frontmatter
  2. Original Contributions
  3. Microstructures of magnetron sputtered Fe–Au thin films
  4. Phase-field simulation of diffusion-controlled coarsening kinetics of γ’ phase in Ni–Al alloy
  5. Structural and magnetic evolution of ball milled nanocrystalline Fe-50 at.% Al alloy
  6. Structural, optical and magnetic properties of nanocrystalline zinc ferrite particles from glycine assisted combustion: Effect of Sr2+ dopant
  7. Correlation of plastic deformation induced intermittent electromagnetic radiation characteristics with mechanical properties of Cu–Ni alloys
  8. Effect of isothermal quenching methods on impact toughness and wear resistance in high boron steel
  9. Wear behaviour of Al/(Al2O3 + ZrB2 + TiB2) hybrid composites fabricated by hot pressing
  10. Regression analysis of bonding strength of sprayed coatings based on acoustic emission signal
  11. Effect of substrates on covalent surface modification of graphene using photosensitive functional group
  12. Short Communications
  13. Investigation of optimum nucleation temperature and heating rate of cordierite glass-ceramics
  14. The influence of process parameters on the preparation of CaF2@Al(OH)3 composite powder via heterogeneous nucleation
  15. Effect of zirconium and heat treatment on the microstructure and properties of cast chromium bronze for conductive parts
  16. The influence of addition of citric acid on the physical properties of metallic oxide nanorods via Sol-Gel route preparation
  17. Notifications
  18. People
  19. DGM News
  20. Conferences
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 31.12.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111157/html
Scroll to top button