Home Technology Mechanical, tribological and oxidation resistance properties of Ni-based self-lubricating composite coatings at elevated temperature by APS
Article
Licensed
Unlicensed Requires Authentication

Mechanical, tribological and oxidation resistance properties of Ni-based self-lubricating composite coatings at elevated temperature by APS

  • Bo Li , Yimin Gao , Cong Li , Qiaoling Zheng , Zhiwei Liu , Yefei Li and Junhong Jia
Published/Copyright: August 30, 2018
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 109 Issue 9

Abstract

NiCrAlY-Mo-20Ag composite coating was fabricated by atmospheric plasma spraying. The influence of heat treatment on the mechanical properties, high temperature oxidation resistance properties and tribological properties of the coating were investigated. After 500°C heat treatment, the microstructure of the coating becomes more homogeneous and the amount of precipitated Y2O3 phase clearly increases. The micohardness and adhesive strength of the composite coating are effectively improved after heat treatment. The coating heat-treated at 500°C shows the highest micohardness and adhesive strength of 433.3 HV and 42.9 MPa as well as excellent lubricating properties over a wide range of temperature. Furthermore, the coating presents excellent oxidation resistance properties at 700°C and 800°C.

Keywords: Tribological properties; Heat treatment; Precipitated phase; Oxidation resistance properties
*Correspondence address, Bo Li, State Key Laboratory for Mechanical Behaviour of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, P. R. China, E-mail:
** Junhong Jia, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, Gansu 730000, P. R. China, E-mail:

References

[1] B.Li, Y.M.Gao, M.M.Han, H.J.Guo, J.H.Jia, W.Z.Wang, H.T.Deng: J. Mater. Res.32 (2017) 1674. 10.1557/jmr.2017.136Search in Google Scholar

[2] E.Y.Liu, Y.M.Gao, W.Z.Wang, X.L.Zhang, X.Wang, G.W.Yi, J.H.Jia: Tribol. Lett.47 (2012) 399. 10.1007/s11249-012-9953-4Search in Google Scholar

[3] B.Li, J.H.Jia, Y.M.Gao, M.M.Han, W.Z.Wang: Tribol. Int.109 (2017) 563. 10.1016/j.triboint.2017.01.031Search in Google Scholar

[4] P.Gallo, F.Berto: Adv. Eng. Mater.18 (2016) 2010. 10.1002/adem.201500547Search in Google Scholar

[5] X.L.Shi, M.Wang, W.Z.Zhai, Z.W.Zhu, Z.S.Xu, Q.X.Zhang, S.Y.Song, J.Yao, A.Q.ud Din: Wear.303 (2013) 9. 10.1016/j.wear.2013.02.013Search in Google Scholar

[6] E.Y.Liu, Y.M.Gao, Y.P.Bai, G.W.Yi, W.Z.Wang, Z.X.Zeng, J.H.Jia: Mater. Charact.97 (2014) 116–124. 10.1016/j.matchar.2014.05.001Search in Google Scholar

[7] G.L.Hou, Y.L.An, X.Q.Zhao, H.D.Zhou, J.M.Chen: Acta Mater.95 (2015) 164. 10.1016/j.actamat.2015.05.025Search in Google Scholar

[8] R.Eriksson, K.Yuan, X.H.Li, R.L.Peng: J. Therm Spray Technol.24 (2015) 953. 10.1007/s11666-015-0253-zSearch in Google Scholar

[9] S.B.Mishra, K.Chandra, S.Prakash: Surf. Coat. Technol.216 (2013) 23. 10.1016/j.surfcoat.2012.09.044Search in Google Scholar

[10] M.L.Shen, P.P.Zhao, Y.Gu, S.L.Zhu, F.H.Wang: Corros. Sci.94 (2015) 294. 10.1016/j.corsci.2015.02.032Search in Google Scholar

[11] S.M.Aouadi, D.P.Singh, D.S.Stone, K.Polychronopoulou, F.Nahif, C.Rebholz, C.Muratore, A.A.Voevodin: Acta Mater.58 (2010) 5326. 10.1016/j.actamat.2010.06.006Search in Google Scholar

[12] H.Y.Wang, D.W.Zuo, M.D.Wang, G.F.Sun, H.Miao, Y.L.Sun: Trans. Nonferrous Met. Soc. Chin.21 (2011) 1322. 10.1016/S1003-6326(11)60860-1Search in Google Scholar

[13] Z.Yazdani, F.Karimzadeh, M.H.Abbasi, A.Amini: Trans. Ind. Ins. Met.68 (2015) 927. 10.1007/s12666-015-0531-ySearch in Google Scholar

[14] L.Z.Du, C.B.Huang, W.G.Zhang, T.G.Li, W.Liu: Surf. Coat. Technol.205 (2011) 3722. 10.1016/j.surfcoat.2011.01.031 Search in Google Scholar

[15] X.L.Shi, W.Z.Zhai, Z.S.Xu, M.Wang, J.Yao, S.Y.Song, Y.F.Wang: Mater. Des.55 (2014) 93. 10.1016/j.matdes.2013.09.051Search in Google Scholar

[16] Y.Tsunekawa, I.Ozdemir, M.Okumiya: J. Therm Spray Technol.15 (2006) 239. 10.1361/105996306X108156Search in Google Scholar

[17] J.J.Chen, J.L.Li, D.S.Xiong, Y.He, Y.J.Ji, Y.K.Qin: Appl. Surf. Sci.361 (2016) 49. 10.1016/j.apsusc.2015.11.094Search in Google Scholar

[18] Y.Y.Zhang, J.M.Shockley, P.Vo, R.R.Chromik: Tribol. Lett.62 (2016) 1. 10.1007/s11249-016-0646-2Search in Google Scholar

[19] S.M.Aouadi, Y.Paudel, W.J.Simonson, Q.Ge, P.Kohli, C.Muratore, A.A.Voevodin: Surf. Coat. Technol.203 (2009) 1304. 10.1016/j.surfcoat.2008.10.040Search in Google Scholar

[20] J.Y.Wang, Y.Shan, H.J.Guo, B.Li, W.Z.Wang, J.H.Jia: Tribol. Lett.59 (2015) 1. 10.1007/s11249-015-0491-8Search in Google Scholar

[21] C.Muratore, A.A.Voevodin, J.J.Hu, J.S.Zabinski: Tribol. Lett.24 (2006) 201. 10.1007/s11249-006-9143-3Search in Google Scholar

[22] J.Chen, Y.L.An, J.Yang, X.Q.Zhao, F.Y.Yan, H.D.Zhou, J.M.Chen: Surf. Coat. Technol.235 (2013) 521. 10.1016/j.surfcoat.2013.08.012Search in Google Scholar

[23] L.Q.Kong, S.Y.Zhu, Z.H.Qiao, J.Yang, Q.L.Bi, W.M.Liu: Tribol. Int.78 (2014) 7. 10.1016/j.triboint.2014.04.032Search in Google Scholar

[24] W.Tian, Y.Wang, T.Zhang, Y.Yang: Mater. Chem. Phys.118 (2009) 37. 10.1016/j.matchemphys.2009.06.035Search in Google Scholar

[25] Y.Bai, L.Zhao, Y.Wang, D.Chen, B.Q.Li, Z.H.Han: J. Alloys Compd.632 (2015) 794. 10.1016/j.jallcom.2015.01.265Search in Google Scholar

[26] P.Poza, P.S.Grant: Surf. Coat. Technol.201 (2006) 2887. 10.1016/j.surfcoat.2006.06.001Search in Google Scholar

[27] F.Ghadami, M.H.Sohi, S.Ghadami: Surf. Coat. Technol.261 (2015) 289. 10.1016/j.surfcoat.2014.11.016Search in Google Scholar

[28] H.S.Ren, X.J.Tian, H.M.Wang: Mater. Sci. Eng. A614 (2014) 207. 10.1016/j.msea.2014.07.036Search in Google Scholar

[29] N.Kang, P.Coddet, H.L.Liao, C.Coddet: Surf. Coat. Technol.280 (2015) 64. 10.1016/j.surfcoat.2015.08.061Search in Google Scholar

[30] S.Houdkova, E.Smazalova, Z.Pala: J. Therm Spray Technol.25 (2015) 546. 10.1007/s11666-015-0365-5Search in Google Scholar

[31] M.Benegra, A.L.B.Santana, O.Maranho, G.Pintaude: J. Therm Spray Technol.24 (2015) 1111. 10.1007/s11666-015-0266-7Search in Google Scholar

[32] M.Akbi, A.Bouchou, N.Zouache: Appl. Surf. Sci.303 (2014) 131. 10.1016/j.apsusc.2014.02.110Search in Google Scholar

[33] B.Li, Y.M.Gao, J.H.Jia, M.M.Han, H.J.Guo, W.Z.Wang: J. Alloys Compd.686 (2016) 503. 10.1016/j.jallcom.2016.06.075Search in Google Scholar

[34] Y.L.An, J.Chen, G.L.Hou, X.Q.Zhao, H.D.Zhou, J.M.Chen, F.Y.Yan: Tribol. Lett.58 (2015) 34. 10.1007/s11249-015-0489-2Search in Google Scholar

[35] J.Chen, X.Q.Zhao, H.D.Zhou, J.M.Chen, Y.L.An, F.Y.Yan: Tribol. Lett.56 (2014) 55. 10.1007/s11249-014-0382-4Search in Google Scholar

[36] B.Y.Zhang, J.Shi, G.J.Yang, C.X.Li, C.J.Li: J. Therm Spray Technol.24 (2015) 611. 10.1007/s11666-015-0218-2Search in Google Scholar

[37] M.H.Chen, S.L.Zhu, F.H.Wang: Corros. Sci.100 (2015) 556. 10.1016/j.corsci.2015.08.033Search in Google Scholar

Received: 2018-01-05
Accepted: 2018-03-13
Published Online: 2018-08-30
Published in Print: 2018-09-14

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of lubricant additives on the tribological behavior of aluminum alloy against steel
  5. First evidence of grain boundary serration in a specifically heat treated wrought Alloy 625 Ni-based superalloy
  6. Precipitation characteristics of a nickel-based single-crystal superalloy after long-term thermal exposure
  7. Dynamic evolution of the metastable structure and nano-precipitation of 7055 aluminum alloy under thermal deformation
  8. Microstructural evolution and high-temperature compressive properties of an extruded Mg–Dy–Zn alloy sheet
  9. Microstructural characterization and residual stress distribution in a nanostructured austenitic stainless steel
  10. Microstructural evolution, phase selection and properties of CoCrCuFeMnxNi high-entropy alloys
  11. Thermodynamic modelling of the Hf–Pt system
  12. Mechanical, tribological and oxidation resistance properties of Ni-based self-lubricating composite coatings at elevated temperature by APS
  13. Pore formation mechanism of porous Ni–Cr–Al alloys prepared by elemental powder reactive synthesis
  14. Co3O4/carbon nano-onions composite as supercapacitor electrode and its excellent electrochemical performance
  15. Short Communications
  16. Reduced graphene oxide–SnO nanocomposites with good visible-light photoactivity
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.111668
Keywords for this article
Tribological properties; Heat treatment; Precipitated phase; Oxidation resistance properties

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of lubricant additives on the tribological behavior of aluminum alloy against steel
  5. First evidence of grain boundary serration in a specifically heat treated wrought Alloy 625 Ni-based superalloy
  6. Precipitation characteristics of a nickel-based single-crystal superalloy after long-term thermal exposure
  7. Dynamic evolution of the metastable structure and nano-precipitation of 7055 aluminum alloy under thermal deformation
  8. Microstructural evolution and high-temperature compressive properties of an extruded Mg–Dy–Zn alloy sheet
  9. Microstructural characterization and residual stress distribution in a nanostructured austenitic stainless steel
  10. Microstructural evolution, phase selection and properties of CoCrCuFeMnxNi high-entropy alloys
  11. Thermodynamic modelling of the Hf–Pt system
  12. Mechanical, tribological and oxidation resistance properties of Ni-based self-lubricating composite coatings at elevated temperature by APS
  13. Pore formation mechanism of porous Ni–Cr–Al alloys prepared by elemental powder reactive synthesis
  14. Co3O4/carbon nano-onions composite as supercapacitor electrode and its excellent electrochemical performance
  15. Short Communications
  16. Reduced graphene oxide–SnO nanocomposites with good visible-light photoactivity
  17. DGM News
  18. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 22.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111668/html
Scroll to top button