Startseite Structure and properties of mesophase pitch-derived carbon foams reinforced by mesocarbon microbeads
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Structure and properties of mesophase pitch-derived carbon foams reinforced by mesocarbon microbeads

  • Shan Li , Bo-Fan Lin , Shinn-Shyong Tzeng und Hsien-Tang Chiu
Veröffentlicht/Copyright: 5. Februar 2016
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 107 Heft 2

Abstract

Carbon foams were produced from mixtures of mesophase pitch and mesocarbon microbeads (MCMBs) and the effects of MCMB addition and the MCMB particle size on the structure and properties of the foams were investigated. Experimental results showed that the addition of MCMBs raised the compressive strength due to the reduction of micro-cracks as well as the increase of bulk density. The thermal diffusivity increased initially and then decreased when the amount of MCMBs was raised. Compared to the particle size of MCMB, concentration makes a larger contribution to pore size and properties under the current experimental conditions.

Keywords: Carbon foams; Mesophase pitch; Mesocarbon microbead (MCMB)
*Correspondence address, Professor Shinn-Shyong Tzeng, 7-1 Teh-Hui Street, Taipei 104, Taiwan. Tel.: +886 2 21822928 ext. 6223, Fax: +886 2 25866484, E-mail:

References

[1] W.Ford: US Patent 3121050 (1964).Suche in Google Scholar

[2] N.C.Gallego, J.W.Klett: Carbon41 (2003) 1461. 10.1016/S0008-6223(03)00091-5Suche in Google Scholar

[3] A.H.Stiller, P.G.Stansberry, J.W.Zondlo: US Patent 5888469 (1999).Suche in Google Scholar

[4] C.Chen, E.B.Kennel, A.H.Stiller, P.G.Stansberry, J.W.Zondlo: Carbon44 (2006) 1535. 10.1016/j.carbon.2005.12.021Suche in Google Scholar

[5] J.W.Klett, R.Hardy, E.Romine, C.A.Walls, T.D.Burchell: Carbon38 (2000) 953. 10.1016/S0008-6223(99)00190-6Suche in Google Scholar

[6] J.W.Klett: US Patent 6033506 (2000).Suche in Google Scholar

[7] J.W.Klett, A.D.McMillan, N.C.Gallego, C.A.Walls: J. Mater. Sci.39 (2004) 3659. 10.1023/B:JMSC.0000030719.80262.f8Suche in Google Scholar

[8] J.W.Klett, A.D.McMillan, N.C.Gallego, T.D.Burchell, C.A.Walls: Carbon42 (2004) 1894. 10.1016/j.carbon.2004.04.007Suche in Google Scholar

[9] S.Z.Li, Y.Z.Song, Y.Song, J.L.Shi, L.Liu, X.H.Wei, Q.G.Guo: Carbon45 (2007) 2092. 10.1016/j.carbon.2007.05.014Suche in Google Scholar

[10] W.Q.Li, H.B.Zhang, X.Xiong, F.Xiao: Mater. Sci. Eng. A527 (2010) 7274. 10.1016/j.msea.2010.07.078Suche in Google Scholar

[11] W.Fawcett, D.K.Shetty: Carbon48 (2010) 68. 10.1016/j.carbon.2009.08.032Suche in Google Scholar

[12] T.Beechem, K.Lafdi: Carbon44 (2006) 1548. 10.1016/j.carbon.2005.12.044Suche in Google Scholar

[13] W.Q.Li, H.B.Zhang, X.Xiong, F.Xiao: Mater. Sci. Eng. A528 (2011) 2999. 10.1016/j.msea.2010.12.013Suche in Google Scholar

[14] J.J.Zhu, X.Y.Wang, L.F.Guo, Y.M.Wang, Y.P.Wang, M.F.Yu, K.-K.Lau: Carbon45 (2007) 2547. 10.1016/j.carbon.2007.08.019Suche in Google Scholar

[15] X.Y.Wang, J.M.Zhong, Y.M.Wang, M.F.Yu: Carbon44 (2006) 1560. 10.1016/j.carbon.2005.12.025Suche in Google Scholar

[16] B.D.Cullity, S.R.Stock: Elements of X-ray diffraction, Prentice-Hall Inc., New Jersey (2001).Suche in Google Scholar

[17] I.Mochida: Carbon28 (1990) 311. 10.1016/0008-6223(90)90005-JSuche in Google Scholar

[18] J.Sanchez-Coronado, D.D.L.Chung: Carbon41 (2003) 1175. 10.1016/S0008-6223(03)00025-3Suche in Google Scholar

[19] D.Gaies, K.T.Faber: Carbon40 (2002) 1137. 10.1016/S0008-6223(02)00099-4Suche in Google Scholar

[20] J.Blumm, D.Morgan, in: H.Wang, W.D.Porter, G.Worley (Eds.), Thermal Conductivity 27/Thermal Expansion 15, DEStech Publications, Inc., USA (2005) 83.Suche in Google Scholar

[21] http://carbon.atomistry.com/physical_properties_amorphous_carbon.htmlSuche in Google Scholar

[22] K.Anupam, G.N.Halder, Z.Roy, S.C.Sarkar, A.Yadav: Can. J. Chem. Eng.91 (2013) 751. 10.1002/cjce.21689Suche in Google Scholar

[23] Torayca® T300 Data Sheet, Technical Data Sheet No. CFA-001.Suche in Google Scholar

[24] http://www.ultramet.com/refractoryopencells_properties_of_foam.htmlSuche in Google Scholar

Received: 2015-05-26
Accepted: 2015-09-28
Published Online: 2016-02-05
Published in Print: 2016-02-10

© 2016, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of preparation method of metal hydride electrode on efficiency of hydrogen electrosorption process
  5. Relationship between hydrogen-induced phase transformations and pitting nucleation sites in duplex stainless steel
  6. Characterization and tribocorrosion behavior of sputtered NiTi coatings
  7. Further application of the cleavage fracture stress model for estimating the T0 of highly embrittled ferritic steels
  8. On the prediction of long term creep strength of creep resistant steels
  9. The debonding toughness in layered particulate polymer composites
  10. Structure and properties of mesophase pitch-derived carbon foams reinforced by mesocarbon microbeads
  11. Thermodynamic properties over (Ni2Te3O8 + NiTe2O5) in the Ni–Te–O system: Transpiration thermogravimetric and Knudsen effusion mass spectrometric studies
  12. Effect of green preform composition, temperature and duration conditions on microstructure and performance of Al-5Ti-0.2C master alloy
  13. Nitrogen ion bombardment of multilayer graphene films grown on Cu foil by LPCVD
  14. Short Communications
  15. Correlation of fracture features with mechanical properties as a function of strain rate in zirconium alloys
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.111323
Schlagwörter für diesen Artikel
Carbon foams; Mesophase pitch; Mesocarbon microbead (MCMB)

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of preparation method of metal hydride electrode on efficiency of hydrogen electrosorption process
  5. Relationship between hydrogen-induced phase transformations and pitting nucleation sites in duplex stainless steel
  6. Characterization and tribocorrosion behavior of sputtered NiTi coatings
  7. Further application of the cleavage fracture stress model for estimating the T0 of highly embrittled ferritic steels
  8. On the prediction of long term creep strength of creep resistant steels
  9. The debonding toughness in layered particulate polymer composites
  10. Structure and properties of mesophase pitch-derived carbon foams reinforced by mesocarbon microbeads
  11. Thermodynamic properties over (Ni2Te3O8 + NiTe2O5) in the Ni–Te–O system: Transpiration thermogravimetric and Knudsen effusion mass spectrometric studies
  12. Effect of green preform composition, temperature and duration conditions on microstructure and performance of Al-5Ti-0.2C master alloy
  13. Nitrogen ion bombardment of multilayer graphene films grown on Cu foil by LPCVD
  14. Short Communications
  15. Correlation of fracture features with mechanical properties as a function of strain rate in zirconium alloys
  16. DGM News
  17. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111323/pdf
Button zum nach oben scrollen