DGM News

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Effect of preparation method of metal hydride electrode on efficiency of hydrogen electrosorption process
5. Relationship between hydrogen-induced phase transformations and pitting nucleation sites in duplex stainless steel
6. Characterization and tribocorrosion behavior of sputtered NiTi coatings
7. Further application of the cleavage fracture stress model for estimating the T₀ of highly embrittled ferritic steels
8. On the prediction of long term creep strength of creep resistant steels
9. The debonding toughness in layered particulate polymer composites
10. Structure and properties of mesophase pitch-derived carbon foams reinforced by mesocarbon microbeads
11. Thermodynamic properties over (Ni₂Te₃O₈ + NiTe₂O₅) in the Ni–Te–O system: Transpiration thermogravimetric and Knudsen effusion mass spectrometric studies
12. Effect of green preform composition, temperature and duration conditions on microstructure and performance of Al-5Ti-0.2C master alloy
13. Nitrogen ion bombardment of multilayer graphene films grown on Cu foil by LPCVD
14. Short Communications
15. Correlation of fracture features with mechanical properties as a function of strain rate in zirconium alloys
16. DGM News
17. DGM News