Production of bioactive glass-derived scaffolds using citric acid porogen
-
Samaneh Izadi
Abstract
In the present study porous bioactive scaffolds were produced by mixing citric acid porogen and sol–gel derived bioactive glass powder, followed by sintering at 1200, 1250 and 1300°C. Bioglass powder and scaffolds were characterized by means of thermogravimetry, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Total porosity and compressive strength of scaffolds sintered at 1250°C were 70% and 0.8 MPa, respectively. Also, X-ray diffraction analysis of these scaffolds showed calcium pyrophosphate, pseudowollastonite and cristobalite were the main phases found in the composition of the scaffolds at all three temperatures. After immersion of scaffolds in simulated body fluid, remarkable calcium phosphate precipitation was observed under scanning electron microscopy. This scaffold can be a suitable candidate for bone tissue engineering.
References
[1] N.Li, R.Wang: Ceram. Int.38 (2012) 6889. 10.1016/j.ceramint.2011.05.153Search in Google Scholar
[2] Q.Z.Chen, I.D.Thompson, A.R.Boccaccini: Biomaterials27 (2006) 2414. 10.1016/j.biomaterials.2005.10.029Search in Google Scholar PubMed
[3] M.N.Rahaman, D.E.Day, B. SonnyBal, Q.Fu, S.B.Jung, L.F.Bonewald, A.P.Tomsia: Acta Biomater.7 (2011) 2373. 10.1016/j.actbio.2011.03.016Search in Google Scholar PubMed PubMed Central
[4] G.Luz, J.Mano: Nanotechnol.22 (2011) 494014. 10.1088/0957-4484/22/49/494014Search in Google Scholar PubMed
[5] T.Kokubo, H.Takadama: Biomaterials27 (2006) 2907. 10.1016/j.biomaterials.2006.01.017Search in Google Scholar PubMed
[6] I.Xynos, M.Hukkanen, J.Batten, L.Buttery, L.Hench, J.Polak: Calcified Tissue Int.67 (2000) 321. 10.1007/s002230001134Search in Google Scholar PubMed
[7] J.Zhong, D.C.Greenspan: J. Biomed. Materials. Res.53 (2000) 694. 10.1002/1097-4636(2000)53:6<694::AID-JBM12>3.0.CO;2-6Search in Google Scholar
[8] S.Wang, H.Jain, T.J.Kowal, M.M.Falk, M.K.Marei: Tissue Eng.19 (2013) 1632. 10.1089/ten.tea.2012.0585Search in Google Scholar
[9] M.M.Pereira, J.R.Jones, L.L.Hench: Adv. Appl. Ceram.104 (2005) 35. 10.1179/174367605225011034Search in Google Scholar
[10] A.R.Boccaccini, F.Chicatun, J.Cho, O.Bretcanu, J.A.Roether, S.Novak, Q.Chen: Adv. Funct. Mater.17 (2007) 2815. 10.1002/adfm.200600887Search in Google Scholar
[11] Q.Fu, M.N.Rahaman, B. SonnyBal, R.F.Brown, D.E.Day: Acta Biomater.4 (2008) 1854. 10.1016/j.actbio.2008.04.019Search in Google Scholar PubMed
[12] T.Kokubo, S.Ito, Z.Huang, T.Hayashi, S.Sakka, T.Kitsugi, T.Yamamuro: J. Biomed. Mater. Res.24 (1990) 331. 10.1002/jbm.820240306Search in Google Scholar PubMed
[13] B.Kundu, A.Lemos, C.Soundrapandian, P.Sen, S.Datta, J.Ferreira, D.Basu: J. Mater. Sci. Mater. Med.21 (2010) 2955. 10.1007/s10856-010-4127-0Search in Google Scholar PubMed
[14] D.M.Yunos, O.Bretcanu, A.R.Boccaccini: J. Mater. Sci.43 (2008) 4433. 10.1007/s10853-008-2552-ySearch in Google Scholar
[15] A.M.Le Ray, H.Gautier, J.M.Bouler, P.W.Merle: Ceram. Int.36 (2010) 93. 10.1016/j.ceramint.2009.07.001Search in Google Scholar
[16] I.Anastasios, A.Mitsionis, C.Tiverios, A.Vaimakis, C.Christos: Ceram. Int.36 (2010) 623. 10.1016/j.ceramint.2009.09.034Search in Google Scholar
[17] M.Sohrabi, S.Hesaraki, A.Kazemzadeh, M.Alizadeh: Mater. Sci. Eng. C33 (2013) 3563. 10.1016/j.msec.2013.06.002Search in Google Scholar PubMed
[18] S.Hesaraki, F.Moztarzadeh, D.Sharifi: J. Biomed. Mater. Res.A83 (2007) 80. 10.1002/jbm.a.31196Search in Google Scholar PubMed
[19] J.Ma, C.Chen, D.Wang, X.Meng, J.Shi: Ceram. Int.36 (2010) 1911. 10.1016/j.ceramint.2009.07.014Search in Google Scholar
[20] P.Ducheyne, Q.Qiu: Biomaterials20 (1999) 2287. 10.1016/S0142-9612(99)00181-7Search in Google Scholar
© 2015, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phase equilibria studies of the “MnO”–Al2O3–SiO2 system in equilibrium with metallic alloy. Part 2: phase equilibria
- X-ray stress measurement from an imperfect Debye–Scherrer ring
- Effect of heat treatment on the microstructure and tensile properties of Ti-5Al-3Zr-4Mo-3V alloy
- Quantification of roping in aluminium sheet alloys for car body applications by combining 3D surface measurements with Fourier analysis
- Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
- Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
- Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO2-coated SiC particles: a perspective on previous studies
- Role of chloride in the electrochemical behaviour of AZ31B Mg alloy
- Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys
- Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol–metal nitrate precursor assisted by nitric acid
- Production of bioactive glass-derived scaffolds using citric acid porogen
- Short Communications
- Microstructure and mechanical properties of deformed Mg–Mn–Sn alloys
- Fast microwave synthesis and characterization of MgTi2O5
- Time dependent synthesis of crystalline Bi2S3 and its application as a sensitizer in SnO2 based solar cells
- Synthesis of cobalt-doped CdS (CdS:Co) by a simple and rapid microwave activated method and investigating optical properties
- People
- In Memoriam Volker Schumacher
- DGM News
- DGM News