Startseite Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding

  • Qian Liang und Yinxiang Lu
Veröffentlicht/Copyright: 16. Oktober 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 104 Heft 9

Abstract

Copper/bamboo fabric composite prepared via a silver catalytic electroless plating process is reported. The microstructure of the composite was analyzed by means of scanning electron microscopy, which illustrated that the copper coating was composed of spherical particles and clusters. The composition and chemical state of the metal layer were measured using X-ray diffraction and energy-dispersive X-ray analysis spectra; copper and a small amount of nickel were detected. Mechanical properties were measured based on a standard (ISO 13934-1:1999) for the fabrics with and without copper coating. The breaking force for the composite was improved by about 16.8% compared to uncoated bamboo fabric. The electromagnetic interference shielding effectiveness of the composite was more than 40 dB at frequencies ranging from 0.2 to 1000 MHz. The copper coating on bamboo fabric passed the Scotch®-tape test.

Keywords:: Electroless copper deposition; Bamboo fabric; Electromagnetic interference shielding; Mechanical tension; Silver
* Correspondence address, Dr. Yinxiang Lu, Department of Materials Science, Fudan University, 220 Handan Road, Shanghai 200433, China, Tel.: +862165642871, Fax: +862165642871, E-mail:

References

[1] B.Lipp-Symonowicz, S.Sztajnowski, D.Wojciechowska: Fibres Text. East Eur.19 (2011) 18.Suche in Google Scholar

[2] J.M.O.Scurlock, D.C.Dayton, B.Hames: Biomass Bioenerg.19 (2000) 229. 10.1016/S0961-9534(00)00038-6Suche in Google Scholar

[3] S.Geetha, K.K.S.Kumar, C.R.K.Rao, M.Vijayan, D.C.Trivedi: J. Appl. Polym. Sci.112 (2009) 2073. 10.1002/app.29812Suche in Google Scholar

[4] S.X.Jiang, R.H.Guo: Surf. Coat. Technol.205 (2011) 4274. 10.1016/j.surfcoat.2011.03.033Suche in Google Scholar

[5] H.C.Chen, K.C.Lee, J.H.Lin, M.Koch: J. Mater. Process. Technol.192–193 (2007) 549. 10.1016/j.jmatprotec.2007.04.023Suche in Google Scholar

[6] J.S.Roh, Y.S.Chi, T.J.Kang, S.Nam: Text. Res. J.78 (2008) 825. 10.1177/0040517507089748Suche in Google Scholar

[7] H.Zhang, L.P.Shen, J.Chang: J. Ind. Text.41 (2011) 25. 10.1177/1528083710387176Suche in Google Scholar

[8] M.Charbonnier, M.Romand, Y.Goepfert, D.Leonard, F.Bessueille, M.Bouadi: Thin Solid Films515 (2006) 1623. 10.1016/j.tsf.2006.05.032Suche in Google Scholar

[9] S.Alix, E.Philippe, A.Bessadok, L.Lebrun, C.Morvan, S.Marais: Bioresour. Technol.100, (2009) 4742. PMid:19477120 10.1016/j.biortech.2009.04.067Suche in Google Scholar PubMed

[10] E.Glickman, A.Inberg, N.Fishelson, Y.Shaham-Diamand: Microelectron. Eng.84, (2007) 2466. 10.1016/j.mee.2007.05.032Suche in Google Scholar

[11] A.Hursa, T.Rolich, S.E.Razic: Text. Res. J.79 (2009) 1588. 10.1177/0040517509104316Suche in Google Scholar

[12] J.Y.Zhou, Y.Li, L.Jimmy, X.Y.Cao: Text. Res. J.80 (2010) 1965. 10.1177/0040517510371864Suche in Google Scholar

[13] R.Venkataraman, T.S.S.Kumar, K.Ramalingam: J. Test. Eval.34 (2006) 440.Suche in Google Scholar

[14] M.J.John, S.Thomas: Carbohyd. Polym.71 (2008) 343. 10.1016/j.carbpol.2007.05.040Suche in Google Scholar

[15] F.W.Langkilde, A.Svantesson: J. Pharmaceut. Biomed.13 (1995) 409. 10.1016/0731-7085(95)01298-YSuche in Google Scholar

[16] A.Synytsya, J.Copikova, P.Matejka, V.Machovic: Carbohyd. Polym.54 (2003) 97. 10.1016/S0144-8617(03)00158-9Suche in Google Scholar

[17] L.S.Johansson, J.M.Campbell, K.Koljonen, P.Stenius: Appl. Surf. Sci.144–145 (1999) 92. 10.1016/S0169-4332(98)00920-9Suche in Google Scholar

[18] S.Shukla, S.Seal, J.Akesson, R.Oder, R.Carter, Z.Rahman: Appl. Surf. Sci.181 (2001) 35. 10.1016/S0169-4332(01)00341-5Suche in Google Scholar

[19] R.H.Guo, S.Q.Jiang, C.W.M.Yuen, M.C.F.Ng: J. Mater. Sci. Mater. Electron.20 (2009) 33. 10.1007/s10854-007-9427-xSuche in Google Scholar

[20] E.Princi, S.Vicini, E.Pedemonte, G.Gentile, M.Cocca, E.Martuscelli: Eur. Polym. J.42 (2006) 51. 10.1016/j.eurpolymj.2005.08.005Suche in Google Scholar

Received: 2012-10-23
Accepted: 2013-3-21
Published Online: 2013-10-16
Published in Print: 2013-09-12

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The interrelated effect of activation energy and grain boundary energy on grain growth in nanocrystalline materials
  5. Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding
  6. Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy
  7. Experimental investigation of phase equilibria in the Co–Cr–W ternary system
  8. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region
  9. Enthalpies of mixing in liquid alloys of iron with the lanthanides
  10. Ab-initio studies of some rare-earth borides: CeB2, PrB2, NdB2, and PmB2
  11. Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys
  12. Undercooling of Sn–Ag–Cu alloys: solder balls and solder joints solidification
  13. Nitrogen deficiency and metal dopant induced sub-stoichiometry in titanium nitride thin films: a comparative study
  14. The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2
  15. PEMFC membrane electrode assembly degradation study based on its mechanical properties
  16. Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites
  17. Microstructural aspects of ceramic hollow microspheres reinforced metal matrix composites
  18. Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
  19. People
  20. Dr. Herbert Karl Schmid
  21. Ludwig Gauckler
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110945
Schlagwörter für diesen Artikel
Electroless copper deposition; Bamboo fabric; Electromagnetic interference shielding; Mechanical tension; Silver

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The interrelated effect of activation energy and grain boundary energy on grain growth in nanocrystalline materials
  5. Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding
  6. Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy
  7. Experimental investigation of phase equilibria in the Co–Cr–W ternary system
  8. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region
  9. Enthalpies of mixing in liquid alloys of iron with the lanthanides
  10. Ab-initio studies of some rare-earth borides: CeB2, PrB2, NdB2, and PmB2
  11. Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys
  12. Undercooling of Sn–Ag–Cu alloys: solder balls and solder joints solidification
  13. Nitrogen deficiency and metal dopant induced sub-stoichiometry in titanium nitride thin films: a comparative study
  14. The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2
  15. PEMFC membrane electrode assembly degradation study based on its mechanical properties
  16. Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites
  17. Microstructural aspects of ceramic hollow microspheres reinforced metal matrix composites
  18. Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
  19. People
  20. Dr. Herbert Karl Schmid
  21. Ludwig Gauckler
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110945/html?lang=de
Button zum nach oben scrollen