DGM News

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. The interrelated effect of activation energy and grain boundary energy on grain growth in nanocrystalline materials
5. Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding
6. Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy
7. Experimental investigation of phase equilibria in the Co–Cr–W ternary system
8. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region
9. Enthalpies of mixing in liquid alloys of iron with the lanthanides
10. Ab-initio studies of some rare-earth borides: CeB₂, PrB₂, NdB₂, and PmB₂
11. Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys
12. Undercooling of Sn–Ag–Cu alloys: solder balls and solder joints solidification
13. Nitrogen deficiency and metal dopant induced sub-stoichiometry in titanium nitride thin films: a comparative study
14. The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O₂ + 0.2%HCl + 0.08%SO₂ + N₂
15. PEMFC membrane electrode assembly degradation study based on its mechanical properties
16. Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites
17. Microstructural aspects of ceramic hollow microspheres reinforced metal matrix composites
18. Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
19. People
20. Dr. Herbert Karl Schmid
21. Ludwig Gauckler
22. DGM News
23. DGM News