Experimental survey on fluid brazing in ancient goldsmith' art
-
Andrea Cagnetti
Abstract
The paper tries to show the essential role played by a brazing process in the manufacturing of filigree and granulation decorated ancient jewels. A purely experimental framework is proposed. Reasons for such a methodological choice are outlined and general protocols for a standard experiment are provided. Specific advantages for the accomplishment of the manufacturing process in all its stages are shown to be related to the employment of a fluid brazing solution. The concordance of the few available ancient sources, the simplicity of technique's application, as well as the jewels concretely produced during years of research in the field, highlight the plausibility of the adopted approach.
References
[1] B.Cellini: Trattati dell'oreficeria e della scultura.Suche in Google Scholar
[2] A.Castellani: Dell'oreficeria antica, Discorso di Augusto Castellani, Felice Le Monnier, Firenze (1862).Suche in Google Scholar
[3] H.A.P.Littledale: A New Process for Hard Soldering, London (1936).Suche in Google Scholar
[4] D.L.Carrol: AJA78 (1983) 33–39.10.2307/503754Suche in Google Scholar
[5] G.Nestler, E.Formigli: Granulazione Etrusca, Nuova Immagine Editrice, Firenze (1994).Suche in Google Scholar
[6] G.Demortier, in: H.Koen, A.Janssens, R.Van Grieken (Eds.), Non-destructive Micro Analysis of Cultural Heritage Materials, Elsevier, Amsterdam (2004) 493–528.Suche in Google Scholar
[7] P.Parrini, E.Formigli: AJA86 (1982) 118–121.10.2307/504299Suche in Google Scholar
[8] G.Agricola: The Re Metallica.Suche in Google Scholar
[9] V.Biringuccio: De la Pirotechnia.Suche in Google Scholar
[10] Dioscorides: De Materia Medica.Suche in Google Scholar
[11] Pliny the Elder: Naturalis Historia.Suche in Google Scholar
[12] Theophilus the Monk: Schedula diversarum artium.Suche in Google Scholar
[13] Theophrastus: De Lapidibus.Suche in Google Scholar
[14] Vitruvio: De architectura, Lib. VII.Suche in Google Scholar
[15] K.C.Bailey: The Elder Pliny's Chapters on Chemical Subjects, Edward Arnold, London (1929).Suche in Google Scholar
[16] M.Berthelot: Introduction à l'étude de la chimie des Anciens et du Moyen Âge.Suche in Google Scholar
[17] M.Berthelot: Les Origines de l'alchimie.Suche in Google Scholar
[18] E.Canseliet: Alchimie expliquée sur ses Textes classiques.Suche in Google Scholar
[19] R.J.Forbes: Studies in Ancient Technology, vol. 8, Leiden (1954/55).Suche in Google Scholar
[20] R.Halleux: Les Alchemistes Grecs, vol. I, Papyrus de Leyde, Papyrus de Stockholm, Fragments de Recettes, Parigi (1981).Suche in Google Scholar
[21] E.Ricci, R.Novakovic: Leghe auree e loro tecnologie di lavorazione, CNR Consiglio Nazionale delle Ricerche, Roma (2000).Suche in Google Scholar
[22] F.de Callataý, in: T.Hackens, R.Winkes (Eds.), Gold Jewelry: Craft, Style and Meaning from Mycenae to Costantinopolis, Brown University and Université Catholique de Louvain (1983) 185–190.Suche in Google Scholar
[23] D.Williams, J.Odgen: Greek Gold, Jewellery of the Classical World, H.N. Abrams Inc., New York (1994).Suche in Google Scholar
[24] A.Bantikov, in: J.Aruz, A.Farkas, A.Alekseev, E.Korolkova (Eds.), Oro, Il mistero dei Sarmati e degli Sciti, Electa/Metropolitan Museum of Art, Milano (2001) 250–256.Suche in Google Scholar
[25] R.Cosentino, G.Devoto, in: E.Formigli (Ed.), Preziosi in Oro, Avorio, Osso e Corno, Nuova Immagine Editrice, Siena (1995) 63–66.Suche in Google Scholar
[26] http://archeologiamedievale.unisi.it/NewPages/COLLANE/TESTIBAM/longobardi.Suche in Google Scholar
[27] J.Wolters: Die Granulation, Geschichte und Technik einer alten Goldscmiedekunst, Callwey, Monaco (1983).Suche in Google Scholar
[28] J.Odgen: Jewellery of the Ancient World, Rizzoli International, New York (1982).Suche in Google Scholar
[29] G.Spinola, in: A.Cagnetti (Ed.), Akelo: Golden Works 1994–2004, Milano (2004) 6–8.Suche in Google Scholar
[30] H.Maryon, H.J.Plenderleith, in: C.Singer, E.J.Holmyard, A.R.Hall (Eds.), A History of technology I, New York and London (1954) 658.Suche in Google Scholar
[31] S.Russo: I gioielli nei papiri di età greco-romana – greco-romana Istituto Papirologico “G. Vitelli”, Firenze (1999).Suche in Google Scholar
[32] A.Cagnetti, P.D'Ambrosio: Adornament6 (2007/8) 38–43.Suche in Google Scholar
[33] C.Aldred: Jewels Of the Pharaohs, Thames and Hudson, London (1971).Suche in Google Scholar
[34] G.Platz-Horster, H.U.Tiez, in: E.Formigli (Ed.), Preziosi in Oro, Avorio, Osso e Corno, Nuova Immagine Editrice, Siena (1995) 56–59.Suche in Google Scholar
[35] M.K.Papathanassiou, in: A.E.Laiou (Ed.), The Economic History of Byzantium: From the Seventh through the Fifteenth Century, Dumbarton Oaks, Washington D.C. (2002) 121–127.Suche in Google Scholar
[36] L.Pirzio Biroli Stefanelli: L'oro dei Romani, gioielli di età imperiale, “l'Erma” di Bretschneider, Roma (1992).Suche in Google Scholar
© 2009, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Editorial
- Congratulations
- The 100th Volume of “International Journal of Materials Research” – the DGM congratulates!
- Feature
- The anatomy of the International Journal of Materials Research1 in the light of bibliometry
- Verhakungen, dislocations, solitons, and kinks
- Review
- Do we need a new conference series for the German materials community?
- Basic
- Bainite orientation in plastically deformed austenite
- Microstructure evolution during a liquid–liquid decomposition under the common action of the nucleation, growth and Ostwald ripening of droplets
- Surface tension of liquid binary alloys – theory versus experiment
- Reassessment of the Ni–B system supported by key experiments and first-principles calculation
- A combined microtensile testing and nanoindentation study of the mechanical behavior of nanocrystalline LIGA Ni–Fe
- Effect of electropulsing on the tensile flow stress of ultrafine-grained 3Y-TZP at 1400°C
- Applied
- Experimental survey on fluid brazing in ancient goldsmith' art
- Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel
- Study of near surface changes in yttria-doped tetragonal zirconia after low temperature degradation
- Thermographic analysis of AlSi12 during crystallisation as a function of cooling rate
- Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
- Notification
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Editorial
- Congratulations
- The 100th Volume of “International Journal of Materials Research” – the DGM congratulates!
- Feature
- The anatomy of the International Journal of Materials Research1 in the light of bibliometry
- Verhakungen, dislocations, solitons, and kinks
- Review
- Do we need a new conference series for the German materials community?
- Basic
- Bainite orientation in plastically deformed austenite
- Microstructure evolution during a liquid–liquid decomposition under the common action of the nucleation, growth and Ostwald ripening of droplets
- Surface tension of liquid binary alloys – theory versus experiment
- Reassessment of the Ni–B system supported by key experiments and first-principles calculation
- A combined microtensile testing and nanoindentation study of the mechanical behavior of nanocrystalline LIGA Ni–Fe
- Effect of electropulsing on the tensile flow stress of ultrafine-grained 3Y-TZP at 1400°C
- Applied
- Experimental survey on fluid brazing in ancient goldsmith' art
- Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel
- Study of near surface changes in yttria-doped tetragonal zirconia after low temperature degradation
- Thermographic analysis of AlSi12 during crystallisation as a function of cooling rate
- Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
- Notification
- DGM News
