The 100^th Volume of “International Journal of Materials Research” – the DGM congratulates!

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. Editorial
5. Congratulations
6. The 100^th Volume of “International Journal of Materials Research” – the DGM congratulates!
7. Feature
8. The anatomy of the International Journal of Materials Research¹ in the light of bibliometry
9. Verhakungen, dislocations, solitons, and kinks
10. Review
11. Do we need a new conference series for the German materials community?
12. Basic
13. Bainite orientation in plastically deformed austenite
14. Microstructure evolution during a liquid–liquid decomposition under the common action of the nucleation, growth and Ostwald ripening of droplets
15. Surface tension of liquid binary alloys – theory versus experiment
16. Reassessment of the Ni–B system supported by key experiments and first-principles calculation
17. A combined microtensile testing and nanoindentation study of the mechanical behavior of nanocrystalline LIGA Ni–Fe
18. Effect of electropulsing on the tensile flow stress of ultrafine-grained 3Y-TZP at 1400°C
19. Applied
20. Experimental survey on fluid brazing in ancient goldsmith' art
21. Correlation between heat treatment, microstructure and mechanical properties of a hot-work tool steel
22. Study of near surface changes in yttria-doped tetragonal zirconia after low temperature degradation
23. Thermographic analysis of AlSi12 during crystallisation as a function of cooling rate
24. Oxidation behaviour of experimental Co–Re-base alloys in laboratory air at 1000°C
25. Notification
26. DGM News