Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Phase transitions induced by severe plastic deformation: steady-state and equifinality
5. Dynamic precipitation of nickel-based superalloys undergoing severe deformation below the solvus temperature
6. The influence of ECAP on microstructure evolution of aluminium alloys during in-situ heating in TEM
7. An investigation into the effect of isothermal annealing on the structure (XRD), microstructure (SEM, TEM) and magnetic properties of amorphous ribbons and bulk amorphous plates
8. Analysis of the structure (XRD) and microstructure (TEM, SEM, AFM) of bulk amorphous and nanocrystalline alloys based on FeCoB
9. Preparation and characterization of silicon nanowires using SEM/FIB and TEM
10. In-situ TEM heating of Ni/Al multilayers
11. Microstructure and martensitic transformation in Ni₄₈Mn_39.5Sn_12.5–xSi_x metamagnetic Heusler alloy ribbons
12. Evolution of Fe-rich compounds in a secondary Al–Si–Cu alloy: influence of cooling rate
13. Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with a high molybdenum content
14. Microstructure and properties of thick nanocomposite TiN/Si₃N₄ coatings on Vanadis 23 HS steel
15. Influence of casting procedure on microstructure and properties of Mg alloy–glassy carbon particle composite
16. Microstructural characterization of nanostructured supersonic sprayed Ni–Sn coatings after wear tests at elevated temperature
17. On the wear of TiB_x/TiSi_yC_z coatings deposited on 316L steel
18. 3D reconstruction and characterization of carbides in Ni-based high carbon alloy in a FIB-SEM system
19. Microstructural evolution in deformed duplex stainless steels
20. Microstructure and interfacial reactions in the bonding zone of explosively welded Zr700 and carbon steel plates
21. Microstructural characterization of second phases in X10CrMoVNb9–1 and 12CrMoWCuVNb steels after long steam exposure time at 550°C
22. Short Communications
23. Novel multilayer nano-composite protective coatings for metallic medical tools
24. Microstructural changes in Cu-5.8 at.% In alloy caused by high pressure torsion
25. Electron microscopy investigation of a cast AlSi9Mg aluminum alloy subjected to friction stir processing with overlapping passes
26. DGM News
27. DGM News