Home DGM News
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: August 22, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 5

Published Online: 2013-08-22
Published in Print: 2013-05-10

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Martensite transformation of sub-micron retained austenite in ultra-fine grained manganese transformation-induced plasticity steel
  5. Isothermal transformation of β-phase in Cu-rich Cu-Al-Sn alloys
  6. The effect of nitrogen on the coarsening rate of precipitate phases in iron-based alloys with chromium and vanadium: experimental and theoretical investigations
  7. Phase diagram investigation of the Sn-InxAgyCuz (x:y:z = 7:2:1) section in the Ag-In-Sn-Cu system
  8. Grain refinement and mechanical properties of low-carbon steel by means of equal channel angular pressing and annealing
  9. Thermophysical properties of solid phase palladium over a wide temperature range
  10. Magnetic properties of Nd-Fe-Co-Al rapid solidification alloys
  11. Synthesis of Ir1-xRex (0.15 ≤ x ≤ 0.40) solid solutions under high-pressure and high-temperature
  12. Preparation and magnetic characterization of Fe/metal oxide nanocomposite particles by means of hydrogen reduction assisted ultrasonic spray pyrolysis (USP-HR)
  13. Biofilm formation and corrosion resistance of Ni/SiC nanocomposite layers
  14. Characterization of electrospun fibrous scaffold produced from Indian eri silk fibroin
  15. Hydrothermal synthesis of nano nickel phosphides and investigation of their thermal stability
  16. Effects of PVP and CTAB surfactants on the morphology of cerium oxide nanoparticles synthesized via co-precipitation method
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.013054

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Martensite transformation of sub-micron retained austenite in ultra-fine grained manganese transformation-induced plasticity steel
  5. Isothermal transformation of β-phase in Cu-rich Cu-Al-Sn alloys
  6. The effect of nitrogen on the coarsening rate of precipitate phases in iron-based alloys with chromium and vanadium: experimental and theoretical investigations
  7. Phase diagram investigation of the Sn-InxAgyCuz (x:y:z = 7:2:1) section in the Ag-In-Sn-Cu system
  8. Grain refinement and mechanical properties of low-carbon steel by means of equal channel angular pressing and annealing
  9. Thermophysical properties of solid phase palladium over a wide temperature range
  10. Magnetic properties of Nd-Fe-Co-Al rapid solidification alloys
  11. Synthesis of Ir1-xRex (0.15 ≤ x ≤ 0.40) solid solutions under high-pressure and high-temperature
  12. Preparation and magnetic characterization of Fe/metal oxide nanocomposite particles by means of hydrogen reduction assisted ultrasonic spray pyrolysis (USP-HR)
  13. Biofilm formation and corrosion resistance of Ni/SiC nanocomposite layers
  14. Characterization of electrospun fibrous scaffold produced from Indian eri silk fibroin
  15. Hydrothermal synthesis of nano nickel phosphides and investigation of their thermal stability
  16. Effects of PVP and CTAB surfactants on the morphology of cerium oxide nanoparticles synthesized via co-precipitation method
  17. DGM News
  18. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 3.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.013054/html
Scroll to top button