Keramische Werkstoffe für Walzen und andere Komponenten für das Warmwalzen

Literatur

1 V.Goryany, P. J.Mauk, C.Eckardt: Untersuchung keramischer Werkstoffe für Walzen und anderen Komponenten in der Walztechnik, Materials Testing52 (2010), No. 1-2, S. 100–106Suche in Google Scholar

2 V.Goryany, P. J.Mauk, J.Giersbach: Arbeitswalzen aus Keramik zum Walzen von dünnen Stahlfolien im 20-Walzen-Sendzimirgerüst, Materials Testing53 (2011), No. 10, S. 643–648Suche in Google Scholar

3 Y.Enomoto, K.Mizuhara: Characterisation of wear behaviour of steel and ceramics in the VAMAS round robin testsWear162-164 (1993), Part 1, S. 119–12510.1016/0043-1648(93)90492-5Suche in Google Scholar

4 M. G.Gee, D.Butterfield: The combined effect of speed and humidity on the wear and friction of silicon nitride, Wear162-164 (1993), Part 1, S. 234–24510.1016/0043-1648(93)90506-HSuche in Google Scholar

5 L.Fang, Y.Gao, L.Zhou, P.Li: Unlubricated sliding wear ceramics against graphitized cast irons, Wear171 (1994), No. 1-2, S. 129–13410.1016/0043-1648(94)90355-7Suche in Google Scholar

6 A.Zutshi, R. A.Haber, D. E.Niesz, J. W.Adams, J. B.Wachtman, M. K.Ferber, S. M.Hsu: Processing, microstructure and wear behaviour of silicon nitride hot-pressed with alumina and yttria, Journal of the American Ceramic Society77 (1994), No. 4, S. 883–89010.1111/j.1151-2916.1994.tb07243.xSuche in Google Scholar

7 D.Wang, Z.Mao: Studies on abrasive wear of monolithic silicon nitride and a silicon carbide whiskers-reinforced silicon nitride composite, Journal of the American Ceramic Society78 (1995), No. 10, S. 2705–270810.1111/j.1151-2916.1995.tb08045.xSuche in Google Scholar

8 W.Liu, J. L.Duda, E. E.Klaus: Wear property of silicon nitride in steel-on-Si₃N₄ and Si₃N₄-on- Si₃N₄ systems, Wear199 (1996), No. 2, S. 217–22110.1016/0043-1648(96)06942-6Suche in Google Scholar

9 X. Z.Zhao, J. J.Liu, B. L.Zhu, H. Z.Miao, Z. B.Luo: Friction and wear of Si₃N₄ ceramic/stainless steel. Sliding contact in dry and lubricated conditions, Journal of Materials Engineering and Performance6 (1997), No. 2, S. 203–20810.1007/s11665-997-0015-2Suche in Google Scholar

10 J.Takadoum, H.Houmid-Bannani, D.Mairey: The wear characteristics of silicon nitride. Journal of the European Ceramic Society18 (1998), No. 5, S. 553–55610.1016/S0955-2219(97)00157-XSuche in Google Scholar

11 Z.Xingzhong, L.Jiajun, Z.Baoliang, M.Hezhou, L.Zhenbi: Wear behaviour of Si₃N₄ ceramic cutting tool material against stainless steel in dry water-lubricated conditions. Ceramics International25 (1999), No. 4, S. 309–31510.1016/S0272-8842(98)00040-6Suche in Google Scholar

12 J. R.Gomes, A. S.Miranda, R. F.Silva, J. M.Vieira: Tribooxidational effects on friction and wear behaviour of silicon nitride/tool steel and silicon nitride/grey cast iron contacts, Journal of the American Ceramic Society82 (1999), No. 4, S. 953–96010.1111/j.1151-2916.1999.tb01859.xSuche in Google Scholar

13 J. R.Gomes, M. I.Osendi, P.Miranzo, F. J.Oli-veira, R. F.Silva: Tribological characteristics of self-mated couples of Si₃N₄-SiC composites in the range 22–700°C, Wear233–235 (1999), S. 22210.1016/S0043-1648(99)00243-4Suche in Google Scholar

14 S. S.Kim, Y. H.Chae, D. J.Kim: Tribological characteristics of silicon nitride at elevated temperatures, Tribology Letters9 (2000) No. 3–4, S. 227–23210.1023/A:1018873208419Suche in Google Scholar

15 C. P.Doğan, J. A.Hawk: Microstructure and abrasive wear in silicon nitride ceramics, Wear250 (2001), No. 1, S. 256–26310.1016/S0043-1648(01)00649-4Suche in Google Scholar

16 M.Nakamura, K.Hirao, Y.Yamauchi, S.Kan-zaki: Tribological properties of unidirectionally aligned silicon nitride, Journal of the American Ceramic Society84 (2001), No. 11, S. 2579–258410.1111/j.1151-2916.2001.tb01057.xSuche in Google Scholar

17 M.Košiarova, E.Rudnayova, J.Kovalčik, J.Dusza, M.Hnatko, P.Šajgalik, A.Marstallinger: Wear and creep characteristics of a carbon-derived Si₃N₄/SiC Micro/Nanokomposite, Materialwissenschaft und Werkstofftechnik34 (2003), No. 4, S. 338–34210.1002/mawe.200390071Suche in Google Scholar

18 J.Babcsán Kiss, M. M.Berkes: Investigation of the tribological behaviour of Si₃N₄ based ceramics, Materialwissenschaft und Werk-stofftechnik34 (2003), No. 4, S. 343–34810.1002/mawe.200390072Suche in Google Scholar

19 A.Kailer, T.Hollstein, G.Wötting, K.Berroth, J.Kozlowski: Tribologische Untersuchung von Siliciumnitrid für keramische Walzwerkzeuge, Tribologie und Schmierungstechnik51 (2004), No. 4, S. 20–24Suche in Google Scholar

20 M.Kašiarova, E.Rudnayová, J.Dusza, M.Hnatko, P.Šajgalik, A.Merstallinger, L.Kuzsella: Some tribological properties of a carbon-derived Si₃N₄/SiC nanocomposite, Journal of the European Ceramic Society24 (2004), S. 3131–3435Suche in Google Scholar

21 K.Poser, J.Schneider, K.-H.Zum Gahr: Keramik/Metall-Friktionspaarungen unter ungeschmierter Gleitbeanspruchung bei kurzzeitiger Belastung, Materialwissenschaft und Werkstofftechnik35 (2004), No. 10/11, S. 794–80010.1002/mawe.200400809Suche in Google Scholar

22 R.Schober, D.Loibl: Einsatz keramischer Schneidstoffe in der Stanztechnik, Materialwissenschaft und Werkstofftechnik35 (2004), No. 10/11, S. 830–83410.1002/mawe.200400787Suche in Google Scholar

23 G.Wötting, R.Wagner, G.Martin, E.Streit: Qualitätssichere und zuverlässige Siliciumnitrid-Wälzkörper für hoch belastete Wälzlager, HTM Zeitschrift für Werkstoffe, Wärmebehandlung, Fertigung60 (2005), No. 2, S. 96–103Suche in Google Scholar

24 E.Carrasquero, A.Bellosi, M. H.Staia: Characterisation and wear behaviour of modified silicon nitride, International Journal of Refractory Metals and Hard Materials23 (2005), No. 4-6, S. 391–39710.1016/j.ijrmhm.2005.06.004Suche in Google Scholar

25 H.Hyuga, M. I.Jones, K.Hirao, Y.Yamauchi: Friction and wear properties of Si₃N₄/carbon fiber composites with aligned microstructure, Journal of the American Ceramic Society88 (2005), No. 5, S. 1239–124310.1111/j.1551-2916.2005.00283.xSuche in Google Scholar

26 H.Hyuga, M. I.Jones, K.Hirao, Y.Yamauchi, K.Yoshida, H.Kita: The relationship between multiple scratch tests and wear behaviour of hot pressed silicon nitride ceramics with various rare-earth additive systems, Journal of the American Ceramic Society91 (2008), No. 1, S. 192–197Suche in Google Scholar

27 R.Danzer, T.Lube, P.Supancic, R.Damani: Fracture of ceramics. Advance Engi-neering Materials10 (2008), No. 4, S. 275–298.10.1002/adem.200700347Suche in Google Scholar

28 M.Belmonte, P.Miranzo, M. I.Osendi, J. R.Gomes: Wear of aligned silicon nitride under dry sliding conditions, Wear266 (2009), No. 1-2, S. 6–1210.1016/j.wear.2008.05.004Suche in Google Scholar

29 H.Miyazaki, H.Hyuga, Y.Yoshizawa, K.Hirao, T.Ohji: Correlation of wear behaviour and indentation fracture resistance in silicon nitride ceramics hot-pressed with alumina and yttria, Journal of the European Ceramic Society29 (2009) 8, S. 1535–154210.1016/j.jeurceramsoc.2008.08.020Suche in Google Scholar

30 P.Tatarko, M.Kašiarova, J.Dusza, J.Morgiel, P.Šajgalik, P.Hvizdoš: Wear resistance of hot-pressed Si₃N₄/SiC micro/nanocomposites sintered with rare-earth oxide additives, Wear269 (2010), S. 867–87410.1016/j.wear.2010.08.020Suche in Google Scholar

31 A.Kailer, P. J.Mauk, C.Eckardt, K.Berroth, J.Kozlowski, A.Wagemann: Ceramic rolling tools for enhanced lifetime and product quali-ty. Steel Research International79 (2008), Special Edition of the Proc. of the Metal For-ming Conference 2008, Vol. 2, S. 401–406Suche in Google Scholar

32 R.Danzer, M.Lengauer, W.Zleppnig, W.Harrer: Silicon nitride tools for hot rolling of high-alloyed steel and superalloy wire–load analysis and first practical tests. International Journal of Materials Research98 (2007), No. 11, S. 1104–1114.10.3139/146.101575Suche in Google Scholar

33 M.Lengauer, R.Danzer: Silicon nitride tools for the hot rolling of high-alloyed steel and superalloy wire–crack growth and lifetime prediction. Journal of the European Ceramic Society28 (2008), No. 11, S. 2289–2298.10.1016/j.jeurceramsoc.2008.02.028Suche in Google Scholar

34 R.Danzer, M.Lengauer, D.Rubesa, W.Harrer: Silicon nitride tools for hot rolling of high-alloyed steel and superalloy wires. Key Engineering Materials409 (2009), S. 43–54.10.4028/www.scientific.net/KEM.409.43Suche in Google Scholar

35 M.Hermann, P.Obenaus, C.Schubert, D.Stephan, S.Keßler: Charakterisierung der Gefüge anisotroper Si₃N₄-Materialien, Praktische Metallographie, Sonderband No. 24. Carl Hanser Verlag München (1993), S. 253–261Suche in Google Scholar

36 S.Keßler, D.Stephan, J.Pabst, Chr. Schubert: Korntextur in heißgepreßtem Siliciumnitrid, Proc. DGM Jahrestagung (1991)Suche in Google Scholar

37 F.Lee, K. J.Bowman: Texture and Anoso­-tropy in Silicon Nitride. Journal of the American Ceramic Society75 (1992), No. 7, S. 1748–175510.1111/j.1151-2916.1992.tb07192.xSuche in Google Scholar

38 G.Ziegler: Microstructural aspects of thermal stress resistance of high-strength engineering ceramics Part II: Influence of microstructure on thermal shock resistance of high-strength engineering ceramics, Material­wissenschaft und Werkstofftechnik16 (1985), No. 2, S. 45–5510.1002/mawe.19850160206Suche in Google Scholar

39 M.Schünemann, S.Waengler: Keramische Walzen für Walzdrähte–Wirtschaftlichkeit und Qualität, Proc. Fachsymposium Keramik für die Walztechnik 2009, Fraunhofer Verlag, Stuttgart (2009), S. 85–94Suche in Google Scholar

40 L.Rozsnoki, V.Schreiner: Walzen von Profilen, Proc. Fachsymposium Keramik für die Walztechnik 2009, Fraunhofer Verlag, Stuttgart (2009), S. 149–157Suche in Google Scholar