Inhalt

Articles in the same Issue

1. Inhalt/Contents
2. Inhalt
3. Fachbeiträge/Technical Contributions
4. Effects of the thickness on the microstructure and corrosion behavior of a TiAlN film on 4140 steel
5. The effect of anodizing conditions on the corrosion resistance of Ti6Al4V titanium alloy
6. Frequency analysis of volumetric porosity in aluminum castings at high and low cooling rates
7. Corrosion resistance of nanosilicasilicate conversion coatings on aluminum prepared by the dip immersion method
8. Corrosion behavior of Haynes® 556® Fe-Ni-Cr-Co alloy for integrated coal gasification combined cycle syngas plants: A plant exposure study*
9. Effects of Y₂O₃ and Al₂O₃ sintering additives on the hot pressing behavior of AlN ceramics
10. Einfluss der Klebschichtdicke auf Kopplungsfaktor und Lebensdauer beim Bekleben von piezoelektrischen Flächenwandlern mit Epoxykleber
11. Influence of the heat treatment on hardness and adhesive wear performance of Ni-P deposit with low phosphorus content
12. Effect of plasma nitriding time on surface properties of hard chromium electroplated AISI 1010 steel
13. Diffusion characteristics of plasma nitrided hard chromium on AISI 1010 steel
14. Estimation of the mechanical properties of nanocomposites based on the properties prediction of single wall carbon nanotubes (SWCNT)
15. Investigation of joints between polypropylene and polybutylene terephthalate
16. Parametric optimization of seam welding of stainless steel (SS 304) sheets
17. Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel
18. Optimum buckling design of axially layered graded uniform columns
19. Kalender/Calendar
20. Kalender