Home Aufbau und Betrieb eines Infrarot-Mikrospektrometers auf der Basis eines MEMS-FP-Filters
Article
Licensed
Unlicensed Requires Authentication

Aufbau und Betrieb eines Infrarot-Mikrospektrometers auf der Basis eines MEMS-FP-Filters

  • Martin Ebermann and Norbert Neumann
Published/Copyright: June 2, 2010

Zusammenfassung

In der IR-Absorptionsspektroskopie gibt es ein großes Potenzial für Mikrospektrometer z. B. für die Mehrkomponentenanalyse in der Gasmesstechnik. Es wird ein Mikrospektrometer für den Spektralbereich 3–5 μm vorgestellt, welches auf einem pyroelektrischen Detektor und einem MEMS-Fabry-Pérot-Filter (FPF) basiert. Die Gestaltung des optischen Systems hat großen Einfluss auf das spektrale Auflösungsvermögen und den Signal-Rausch-Abstand des FP-Spektrometers.

Abstract

There is a large potential in the field of infrared absorption spectroscopy, particularly if multicomponent mixtures have to be analyzed. A microspectrometer for the spectral range 3–5 μm is presented, which is based on a pyroelectric detector with an integrated MEMS Fabry-Pérot filter. The influence of different optical set-ups on the spectral resolution and the signal-to-noise ratio are discussed.


* Correspondence address: Infra Tec GmbH, Gostritzer Str. 61-63, 01217 Dresden,

Published Online: 2010-06-02
Published in Print: 2010-06

© by Oldenbourg Wissenschaftsverlag, Dresden, Germany

Downloaded on 17.9.2025 from https://www.degruyterbrill.com/document/doi/10.1524/teme.2010.0021/html
Scroll to top button