Startseite Simultaneous toughening and reinforcing of cyanate ester/benzoxazine resins with improved mechanical and thermal properties by using hyperbranched polyesters
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Simultaneous toughening and reinforcing of cyanate ester/benzoxazine resins with improved mechanical and thermal properties by using hyperbranched polyesters

  • Abdeldjalil Zegaoui , Mehdi Derradji , Ruikun Ma , Wan-an Cai , Aboubakr Medjahed , Wen-bin Liu EMAIL logo , Abdul Qadeer Dayo , Jun Wang , Li-li Zhang und Youcef Ramdani
Veröffentlicht/Copyright: 7. August 2018
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Journal of Polymer Engineering
Aus der Zeitschrift Journal of Polymer Engineering Band 38 Heft 9

Abstract

In the present study, the influence of incorporating various amounts of hyperbranched polyester (HBPE) into thermosetting resin blends composed of cyanate ester (CE) and benzoxazine (BOZ) resins was investigated for their structural, morphological, mechanical, and thermal properties. The FTIR spectra revealed that the CE/BOZ resin had reacted with the functional groups of HBPE, and the SEM test confirmed the morphological changes from a smooth surface that was observed for the virgin CE/BOZ resin to a rough surface for the maximum HBPE content. Moreover, the mechanical and thermal properties were found to be pointedly enhanced as we increased the content of HBPE. These remarkable enhancements may be due to the chemical structure of the HBPE which could form a cross-linked structure through a strong hydrogen bonding with the CE/BOZ resin. As a result, a considerable amount of applied mechanical load can be absorbed, and in parallel, the thermal stability can also be improved. We believe that the HBPE can be a good toughener for the CE/BOZ resins that could possibly expand their range of applications in various industrial sectors.

Keywords: benzoxazine; cyanate ester; hyperbranched polyester (HBPE); mechanical properties; thermal properties

Funding source: National Natural Science Foundation of China

Award Identifier / Grant number: 51773048

Funding source: Natural Science Foundation of Heilongjiang Province

Award Identifier / Grant number: E2017022

Funding statement: The authors greatly appreciate the financial support from the National Natural Science Foundation of China (project no. 51773048), the Natural Science Foundation of Heilongjiang Province (Funder Id 10.13039/501100005046, project no. E2017022), and the Fundamental Research Funds for the Central Universities (project nos. HEUCF201724, HEUCF201791).

References

[1] Zegaoui A, Wang AR, Dayo AQ, Tian B, Liu WB, Wang J, Liu YG. Radiat. Phys. Chem. 2017, 141, 110–117.10.1016/j.radphyschem.2017.06.010Suche in Google Scholar

[2] Sakthidharan CP, Sundararajan PR, Sarojadevi M. RSC Adv. 2015, 5, 19666–19674.10.1039/C4RA16004ESuche in Google Scholar

[3] Gu A. Compos. Sci. Technol. 2006, 66, 1749–1755.10.1016/j.compscitech.2005.11.001Suche in Google Scholar

[4] Santhosh Kumar KS, Reghunadhan Nair CP, Ninan KN. Eur. Polym. J. 2009, 45, 494–502.10.1016/j.eurpolymj.2008.11.001Suche in Google Scholar

[5] Lin CH, Huang SJ, Wang PJ, Lin HT, Dai SA. Macromolecules 2012, 45, 7461–7466.10.1021/ma3009433Suche in Google Scholar

[6] Yan H, Li T, Zhang M, Feng S. High Perform. Polym. 2014, 26, 618–624.10.1177/0954008314526423Suche in Google Scholar

[7] Li X, Luo X, Liu M, Ran Q, Gu Y. Mater. Chem. Phys. 2014, 148, 328–334.10.1016/j.matchemphys.2014.07.051Suche in Google Scholar

[8] Ohashi S, Kilbane J, Heyl T, Ishida H. Macromolecules 2015, 48, 8412–8417.10.1021/acs.macromol.5b02285Suche in Google Scholar

[9] Li X, Luo X, Gu Y. Phys. Chem. Chem. Phys. 2015, 17, 19255–19260.10.1039/C5CP02426ASuche in Google Scholar PubMed

[10] Wang Y, Kou K, Wu G, Zhuo L, Li J, Zhang Y. Polymer (United Kingdom) 2015, 77, 354–360.10.1016/j.polymer.2015.09.059Suche in Google Scholar

[11] Wang Y, Wu G, Kou K, Pan C, Feng A. J. Mater. Sci. Mater. Electron. 2016, 27, 8279–8287.10.1007/s10854-016-4834-5Suche in Google Scholar

[12] Zhang X. Polym. Int. 2011, 60, 153–166.10.1002/pi.2930Suche in Google Scholar

[13] Zhuo D, Gu A, Liang G, Tao Hu J, Yuan L, Ji L. Polym. Int. 2011, 60, 1277–1286.10.1002/pi.3076Suche in Google Scholar

[14] Morell M, Ramis X, Ferrando F, Yu Y, Serra A. Polymer 2009, 50, 5374–5383.10.1016/j.polymer.2009.09.024Suche in Google Scholar

[15] Zhang T, Howell BA, Dumitrascu A, Martin SJ, Smith PB. Polymer 2014, 55, 5065–5072.10.1016/j.polymer.2014.08.036Suche in Google Scholar

[16] Tomuta A, Ferrando F, Serra À, Ramis X. React. Funct. Polym. 2012, 72, 556–563.10.1016/j.reactfunctpolym.2012.05.008Suche in Google Scholar

[17] Zhang D, Jia D. J. Appl. Polym. Sci. 2006, 101, 2504–2511.10.1002/app.23760Suche in Google Scholar

[18] Viswanath GR, Thangaraj R, Guhanathan S. Int. J. Polym. Anal. Charact. 2009, 14, 493–507.10.1080/10236660903072086Suche in Google Scholar

[19] Foix D, Erber M, Voit B, Lederer A, Ramis X, Mantecón A, Serra A. Polym. Degrad. Stab. 2010, 95, 445–452.10.1016/j.polymdegradstab.2010.01.011Suche in Google Scholar

[20] Boogh L, Pettersson B, Manson JAE. Polymer 1999, 40, 2249–2261.10.1016/S0032-3861(98)00464-9Suche in Google Scholar

[21] Zhuo D, Gu A, Liang G, Hu JT, Cao L, Yuan L. Polym. Degrad. Stab. 2011, 96, 505–514.10.1016/j.polymdegradstab.2011.01.006Suche in Google Scholar

[22] Liu Z, Yuan L, Liang G, Gu A. Polym. Adv. Technol. 2015, 26, 1608–1618.10.1002/pat.3590Suche in Google Scholar

[23] Manjula Dhevi D, Jaisankar SN, Pathak M. Eur. Polym. J. 2013, 49, 3561–3572.10.1016/j.eurpolymj.2013.06.041Suche in Google Scholar

[24] Kong X, Zhang Y, Zeng SY, Zhu BK, Zhu LP, Fang LF, Matsuyama H. J. Memb. Sci. 2016, 518, 141–149.10.1016/j.memsci.2016.07.037Suche in Google Scholar

[25] Sun D, Yang P, Sun HL, Li BB. Eur. Polym. J. 2015, 62, 155–166.10.1016/j.eurpolymj.2014.11.027Suche in Google Scholar

[26] Zhao L, Yuan L, Liang G, Gu A. RSC Adv. 2015, 5, 58989–59002.10.1039/C5RA10670BSuche in Google Scholar

[27] Zhang D, Jia D. Polym. Plast. Technol. Eng. 2006, 45, 1005–1011.10.1080/03602550600726277Suche in Google Scholar

[28] Yang JP, Chen ZK, Yang G, Fu SY, Ye L. Polymer 2008, 42, 3168–3175.10.1016/j.polymer.2008.05.008Suche in Google Scholar

[29] Buonocore GG, Schiavo L, Attianese I, Borriello A. Compos. Part B Eng. 2013, 53, 187–192.10.1016/j.compositesb.2013.04.062Suche in Google Scholar

[30] Li S, Zhu H, Lv T, Lin Q, Hou H, Li Y, Wu Q, Cui C. Colloid Polym. Sci. 2016, 294, 607–615.10.1007/s00396-015-3811-5Suche in Google Scholar

Received: 2017-10-24
Accepted: 2018-04-26
Published Online: 2018-08-07
Published in Print: 2018-10-25

©2018 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Material properties
  3. Structure mediation and ductility enhancement of poly(l-lactide) by random copolymer poly(d-lactide-co-ε-caprolactone)
  4. Morphological characterization, thermal, and mechanical properties of compatibilized high density polyethylene/polystyrene/organobentonite ternary nanocomposites
  5. Preparation and assembly
  6. Simultaneous toughening and reinforcing of cyanate ester/benzoxazine resins with improved mechanical and thermal properties by using hyperbranched polyesters
  7. Surface modification of Sb-SnO2/potassium titanate composite and their performance for acrylic coatings
  8. Poly (vinyl alcohol)/nano-diamond composite films and hydrogels prepared by gamma ray
  9. Engineering and processing
  10. Study on structures and properties of ultra-hot drawing UHMWPE fibers fabricated via dry spinning method
  11. Separation of CO2/CH4 and O2/N2 by polysulfone hollow fiber membranes: effects of membrane support properties and surface coating materials
  12. Electric field-induced alignment of MWCNTs during the processing of PP/MWCNT composites: effects on electrical, dielectric, and rheological properties
  13. A molecular modeling study for miscibility of polyimide/polythene mixing systems with/without compatibilizer
  14. Analysis and quantitative estimation of phenolic antioxidants in polypropylene packaging for fat products
  15. Effects of ultrasonic injection molding conditions on the plate processing characteristics of PMMA
https://doi.org/10.1515/polyeng-2017-0376
Schlagwörter für diesen Artikel
benzoxazine; cyanate ester; hyperbranched polyester (HBPE); mechanical properties; thermal properties

Artikel in diesem Heft

  1. Frontmatter
  2. Material properties
  3. Structure mediation and ductility enhancement of poly(l-lactide) by random copolymer poly(d-lactide-co-ε-caprolactone)
  4. Morphological characterization, thermal, and mechanical properties of compatibilized high density polyethylene/polystyrene/organobentonite ternary nanocomposites
  5. Preparation and assembly
  6. Simultaneous toughening and reinforcing of cyanate ester/benzoxazine resins with improved mechanical and thermal properties by using hyperbranched polyesters
  7. Surface modification of Sb-SnO2/potassium titanate composite and their performance for acrylic coatings
  8. Poly (vinyl alcohol)/nano-diamond composite films and hydrogels prepared by gamma ray
  9. Engineering and processing
  10. Study on structures and properties of ultra-hot drawing UHMWPE fibers fabricated via dry spinning method
  11. Separation of CO2/CH4 and O2/N2 by polysulfone hollow fiber membranes: effects of membrane support properties and surface coating materials
  12. Electric field-induced alignment of MWCNTs during the processing of PP/MWCNT composites: effects on electrical, dielectric, and rheological properties
  13. A molecular modeling study for miscibility of polyimide/polythene mixing systems with/without compatibilizer
  14. Analysis and quantitative estimation of phenolic antioxidants in polypropylene packaging for fat products
  15. Effects of ultrasonic injection molding conditions on the plate processing characteristics of PMMA
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2017-0376/pdf?lang=de
Button zum nach oben scrollen