Personal/Personelles

Articles in the same Issue

1. Frontmatter
2. Editorial
3. nanomech 5
4. Articles Basic
5. Quantitative evaluation of nanoindents: Do we need more reliable mechanical parameters for the characterization of materials?
6. Nanoindentation investigation of solid-solution strengthening in III-V semiconductor alloys
7. Comparison between conventional Vickers hardness and indentation hardness obtained with different instruments
8. On the pressure dependence of the indentation modulus
9. A review on the reverse analysis for the extraction of mechanical properties using instrumented Vickers indentation
10. Articles Applied
11. Quasi-static and dynamic depth-sensing indentation measurements to characterize wear and mar resistance of coating–polymer systems
12. Obtaining mechanical parameters for metallisation stress sensor design using nanoindentation
13. Direct measurement of nanoindentation area function by metrological AFM
14. A usable concept for the indentation of thin porous films
15. Analysis of the ductile/brittle transition during a scratch test performed into polymeric film deposited on a PMMA substrate
16. Nanomechanical and nanotribological properties of polymeric ultrathin films for nanoimprint lithography
17. Adhesive and nanomechanical properties of polymeric films deposited on silicon
18. Modelling of the nanoindentation process of ultrathin films
19. Regular articles
20. Experimental investigation and thermodynamic calculation in the Al–Be–Si ternary system
21. Thermodynamic assessment of the Ca–Sn system
22. Interfacial reaction between Cu and Ti₂SnC during processing of Cu–Ti₂SnC composite
23. Effects of heat treatment on the lubricated sliding wear behaviour of zinc-based alloy containing nickel under varying test conditions
24. Influence of Ce, K, and Na on spheroidization of eutectic carbides in low-tungsten white cast iron
25. Notifications/Mitteilungen
26. Personal/Personelles
27. Press/Presse