Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Tailoring nanocrystalline materials towards potential applications

  • EMAIL logo , , , , , , , and
Published/Copyright: February 5, 2022
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 94 Issue 5

Abstract

The high interface area in nanocrystalline materials leads to advanced structural and functional properties that are interesting for a variety of applications and products. Three distinct examples for potential applications are given: Nanocrystalline and submicron-sized light-weight intermetallics based on γ-TiAl exhibiting favourable deformation behaviour at reduced temperatures, nanocrystalline cermet coatings produced by thermal spray process exhibiting improved hardness and wear resistance, and nanocrystalline Mg hydride-based composites for hydrogen storage in future mobile applications exhibiting extremely high, reversible storage capacity and fast kinetics.

Keywords: Nanocrystalline materials; High-energy milling; Intermetallics; Wear resistant coatings; Hydrides

Dedicated to Professor Dr. Otmar Vöhringer on the occasion of his 65th birthday

Dr. Thomas Klassen WTP Powder and Nano Technology GKSS Research Center Geesthacht GmbH Max-Planck-Str. 1, D-21502 Geesthacht, Germany Tel.: +49 4152 87 2525 Fax: +49 4152 87 2636

References

[1] R. Bohn, G. Fanta, T. Klassen, R. Bormann: J. Mater. Res. 16 (2001) 1850.10.1557/JMR.2001.0254Search in Google Scholar

[2] R. Bohn, T. Klassen, R. Bormann: Adv. Eng. Mater. 3 (2001) 238.10.1002/1527-2648(200104)3:4<238::AID-ADEM238>3.0.CO;2-USearch in Google Scholar

[3] R. Bohn, G. Fanta, T. Klassen, R. Bormann: Scripta Mater. 44 (2001) 1479.10.1016/S1359-6462(01)00718-7Search in Google Scholar

[4] R. Bohn, T. Klassen, R. Bormann: Intermetallics 9 (2001) 559.10.1016/S0966-9795(01)00039-5Search in Google Scholar

[5] R. Bohn, T. Klassen, R. Bormann: Acta Mater. 49 (2001) 299.10.1016/S1359-6454(00)00312-8Search in Google Scholar

[6] C. Koeppe, A. Bartels, J. Seeger, H. Mecking: Metall. Trans. A 24 (1993) 1795.10.1007/BF02657854Search in Google Scholar

[7] S.L. Semiatin, V. Seetharaman, V.K. Jain: Metall. Mater. Trans. A 25 (1994) 2753.10.1007/BF02649227Search in Google Scholar

[8] D. Eylon, C.F. Yolton, H. Clemens, P. Schretter, P.E. Jones, in: Proc. PM’94 (Powder Metallurgy World Congress Paris), Vol. II: Intermetallics, Les Editions de Physique, Les Ulis, France (1994) 1271.Search in Google Scholar

[9] G. Fanta, R. Bohn, M. Dahms, T. Klassen, R. Bormann: Intermetallics 9 (2001) 45.10.1016/S0966-9795(00)00088-1Search in Google Scholar

[10] U. Lorenz, J. Müllauer, H. Oehring, F. Appel, R.Wagner, P. Janschek, in: R. Stauber, C. Liesner, R. Buetje, M. Bannasch, (Eds.),Werkstoffe für die Verkehrstechnik, Proc. Materials Week 1998, Vol. II: Symp 2, Wiley-VCH, Weinheim (1999) 471.Search in Google Scholar

[11] G. Fanta, R. Bohn, M. Dahms, T. Klassen, R. Bormann, in: Proc. Materials Week 2000, Werkstoff-Informationsgesellschaft GbR, Frankfurt (2002), on CD-ROM.Search in Google Scholar

[12] W. Schlump, J. Willbrand, H. Greve: Metall 48 (1994) 34.Search in Google Scholar

[13] F. Gärtner, H. Kreye, R. Bormann, T. Klassen, in: H. Dimigen (Ed.), Surface Engineering, EUROMAT 11, Wiley-VCH, Weinheim (2000) 88.Search in Google Scholar

[14] M. Cao, F. Gitzhofer, F.D.V. Gravelle, R. Henne, M.I. Boulos: Plasma Sources Sci. & Technol. 6 (1997) 39.10.1088/0963-0252/6/1/006Search in Google Scholar

[15] F. Gärtner, C. Borchers, H. Kreye, N. Eigen, T. Klassen, R. Bormann, W. Krömmer, V. Borck, in: E.F. Lugscheider, C.C. Berndt (Eds.), Proc. ITSC 2002, Essen, Germany, March 4–6, 2002, ASM Thermal Spray Society, DVS-Verlag, Düsseldorf (2002) 102.10.31399/asm.cp.itsc2002p0102Search in Google Scholar

[16] C. Borchers, F. Gärtner, H. Kreye: Unpublished.Search in Google Scholar

[17] J. He, J.M. Ice, E.J. Lavernia: Mater. Sci. Forum 312– 314 (1999) 237.10.4028/www.scientific.net/MSF.312-314.237Search in Google Scholar

[18] J.J. Reilly, G.D. Sandrock: Scientific American 242 (1980) 5118.10.1038/scientificamerican0280-118Search in Google Scholar

[19] K. Zeng, T. Klassen, W. Oelerich, R. Bormann: Int. J. Hydrogen Energy 24 (1999) 989.10.1016/S0360-3199(98)00132-3Search in Google Scholar

[20] R. Schulz, S. Boily, L. Zaluski, A. Zaluska, P. Tessier, J.O. Ström-Olsen, in: Proc. Int. Conf. on Composite Materials and Energy ENERCOMP 95 (May 8 –10, 1995) – Innovations in Metallic Materials, Technomic Publishing Co., Lancaster, PA (1995) 529.Search in Google Scholar

[21] T. Klassen, W. Oelerich, R. Bormann: Mater. Sci. Forum 360–363 (2001) 603; J. Metastable Nanocryst. Mater. 10 (2001) 603.10.4028/www.scientific.net/MSF.360-362.603Search in Google Scholar

[22] T. Klassen, W. Oelerich, K. Zeng, R. Bormann, J. Huot, in: B.L. Mordike, K.U. Kainer (Eds.), Magnesium Alloys and their Applications, Werkstoff-Informationsgesellschaft mbH, Frankfurt (1998) 307.Search in Google Scholar

[23] J. Renner, H. Grabke: Z. Metallkd. 69 (1978) 639.10.1515/ijmr-1978-691005Search in Google Scholar

[24] J. Topler, H. Buchner, H. Saufferer, K. Knorr, W. Prandl: J. Less-Common Metals 88 (1982) 397.10.1016/0022-5088(82)90248-XSearch in Google Scholar

[25] Song, M.: Int. J. Hydrogen Energy 20 (1995) 221.10.1016/0360-3199(94)E0024-SSearch in Google Scholar

[26] A. Zaluska, L. Zaluski, J.O. Ström-Olsen: J. Alloys Comp. 288 (1999) 217.10.1016/S0925-8388(99)00073-0Search in Google Scholar

[27] W. Oelerich, T. Klassen, R. Bormann: J. Alloys Comp. 315 (2001) 237.10.1016/S0925-8388(00)01284-6Search in Google Scholar

[28] W. Oelerich, T. Klassen, R. Bormann: J. Alloys Comp. 322 (2001) L5.10.1016/S0925-8388(01)01173-2Search in Google Scholar

[29] W. Oelerich, T. Klassen, R. Bormann: Adv. Eng. Mat. 3 (2001) 487.10.1002/1527-2648(200107)3:7<487::AID-ADEM487>3.0.CO;2-0Search in Google Scholar

[30] G. Liang, J. Huot, S. Boily, A. van Neste, R. Schulz: J. Alloys Comp. 297 (2000) 261.10.1016/S0925-8388(99)00592-7Search in Google Scholar

[31] B. Tanguy, J.-L. Soubeyroux, M. Pezat, J. Portier, P. Hagenmuller: Mater. Res. Bull. 11 (1976) 1441.10.1016/0025-5408(76)90057-XSearch in Google Scholar

[32] DaimlerChrysler: Personal communication (1999).Search in Google Scholar
Received: 2002-10-19
Published Online: 2022-02-05

© 2003 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. On the dislocation mechanisms of dynamic strain ageing in fatigued plain carbon steels
  6. Effect of the γ’ volume fraction on the creep strength of Ni-base superalloys
  7. Auswirkung von Ausscheidungen auf das bestrahlungsinduzierte Schwellverhalten und die Hochtemperaturversprödung in dem austenitischen Stahl X10 CrNiMoTiB 15 15
  8. Fatigue life and cyclic deformation behaviour of quenched and tempered steel AISI 4140 at two-step stress- and total-strain-controlled push–pull loading
  9. Untersuchungen zur Anrisslebensdauervorhersage gekerbter Proben mit dem örtlichen Konzept am Beispiel des Stahls Cm15
  10. Bewertung des Ermüdungsverhaltens von Radstählen anhand von Dehnungs-, Temperatur- und Widerstandsmessungen
  11. On the nature of internal interfaces in tempered martensite ferritic steels
  12. Ermittlung von Grenzformänderungskurven an laser- und elektronenstrahlgeschweißten Stahlblechplatinen
  13. Point defects, precipitates and the strength anomaly in ordered Fe–Al alloys
  14. Isothermal high-temperature fatigue behaviour of a near-γ titanium aluminide alloy
  15. Slow fatigue crack growth in 2024-T3 and Ti-6Al-4V at low and ultrasonic frequency
  16. Structural evolution during the cycling of NiTi shape memory alloys
  17. Phase transformations due to isochronal annealing of Mg – rare earth – Sc–Mn squeeze cast alloys
  18. Isothermal strain-controlled quasi-static and cyclic deformation behavior of magnesium wrought alloy AZ31
  19. Microstructure of die-cast alloys Mg–Zn–Al(–Ca): a study by electron microscopy and small-angle neutron scattering
  20. TEM study of the dislocation structure at the transition from discontinuous to viscous glide in Cu–Al and Cu–Mn alloys at elevated temperatures
  21. Application of electron backscatter diffraction in the SEM to textural problems of coated high-temperature superconductors
  22. Oxide dispersion-strengthened silver: manufacturing and properties
  23. Integrative finite element simulation of the rolling of Al alloys with coupled dislocation density and texture models
  24. Microstructure, surface topography and mechanical properties of slip cast and powder injection moulded microspecimens made of zirconia
  25. Thermisch leitfähig modifizierte Funktionskunststoffe
  26. Tailoring nanocrystalline materials towards potential applications
  27. High-strength Cu–Ti-rich bulk metallic glasses and nano-composites
  28. Nanoskalige Schutzschichten für hochbeanspruchte Werkzeuge und Bauteile
  29. Prediction of the critical conditions for dynamic recrystallization in metals
  30. Notifications/Mitteilungen
  31. Personal/Personelles
  32. Conferences/Konferenzen
https://doi.org/10.1515/ijmr-2003-0106
Keywords for this article
Nanocrystalline materials; High-energy milling; Intermetallics; Wear resistant coatings; Hydrides

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. On the dislocation mechanisms of dynamic strain ageing in fatigued plain carbon steels
  6. Effect of the γ’ volume fraction on the creep strength of Ni-base superalloys
  7. Auswirkung von Ausscheidungen auf das bestrahlungsinduzierte Schwellverhalten und die Hochtemperaturversprödung in dem austenitischen Stahl X10 CrNiMoTiB 15 15
  8. Fatigue life and cyclic deformation behaviour of quenched and tempered steel AISI 4140 at two-step stress- and total-strain-controlled push–pull loading
  9. Untersuchungen zur Anrisslebensdauervorhersage gekerbter Proben mit dem örtlichen Konzept am Beispiel des Stahls Cm15
  10. Bewertung des Ermüdungsverhaltens von Radstählen anhand von Dehnungs-, Temperatur- und Widerstandsmessungen
  11. On the nature of internal interfaces in tempered martensite ferritic steels
  12. Ermittlung von Grenzformänderungskurven an laser- und elektronenstrahlgeschweißten Stahlblechplatinen
  13. Point defects, precipitates and the strength anomaly in ordered Fe–Al alloys
  14. Isothermal high-temperature fatigue behaviour of a near-γ titanium aluminide alloy
  15. Slow fatigue crack growth in 2024-T3 and Ti-6Al-4V at low and ultrasonic frequency
  16. Structural evolution during the cycling of NiTi shape memory alloys
  17. Phase transformations due to isochronal annealing of Mg – rare earth – Sc–Mn squeeze cast alloys
  18. Isothermal strain-controlled quasi-static and cyclic deformation behavior of magnesium wrought alloy AZ31
  19. Microstructure of die-cast alloys Mg–Zn–Al(–Ca): a study by electron microscopy and small-angle neutron scattering
  20. TEM study of the dislocation structure at the transition from discontinuous to viscous glide in Cu–Al and Cu–Mn alloys at elevated temperatures
  21. Application of electron backscatter diffraction in the SEM to textural problems of coated high-temperature superconductors
  22. Oxide dispersion-strengthened silver: manufacturing and properties
  23. Integrative finite element simulation of the rolling of Al alloys with coupled dislocation density and texture models
  24. Microstructure, surface topography and mechanical properties of slip cast and powder injection moulded microspecimens made of zirconia
  25. Thermisch leitfähig modifizierte Funktionskunststoffe
  26. Tailoring nanocrystalline materials towards potential applications
  27. High-strength Cu–Ti-rich bulk metallic glasses and nano-composites
  28. Nanoskalige Schutzschichten für hochbeanspruchte Werkzeuge und Bauteile
  29. Prediction of the critical conditions for dynamic recrystallization in metals
  30. Notifications/Mitteilungen
  31. Personal/Personelles
  32. Conferences/Konferenzen
Downloaded on 19.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2003-0106/html
Scroll to top button