Article
Publicly Available
Frontmatter
Published/Copyright:
January 28, 2017
Published Online: 2017-1-28
Published in Print: 2017-1-27
© 2017 by De Gruyter
Articles in the same Issue
- Frontmatter
- Research Articles
- Preparation of Co3O4 Nanostructures via a Hydrothermal- Assisted Thermal Treatment Method by Using of New Precursors
- Transformation Temperatures, Shape Memory and Magnetic Properties of Hafnium Modified Ti-Ta Based High Temperature Shape Memory Alloys
- Modified Sol-Gel Processing of NiCr2O4 Nanoparticles; Structural Analysis and Optical Band Gap
- Effect of Proeutectoid Ferrite Morphology on the Microstructure and Mechanical Properties of Hot Rolled 60Si2MnA Spring Steel
- Uniaxial Properties versus Temperature, Creep and Impact Energy of an Austenitic Steel
- Effect of Rare Earth Cerium Addition on Microstructures and Mechanical Properties of Low Carbon High Manganese Steels
- Geometry and Material Constraint Effects on Creep Crack Growth Behavior in Welded Joints
- Preparation and Properties of ZrO2/Mo Alloys
- The Mechanical Properties of the Mo-0.5Ti and Mo-0.1Zr Alloys at Room Temperature and High Temperature Annealing
- Diffusion Kinetics of Chromium in a Novel Super304H Stainless Steel
- Mechanism of Selective Desulphurization in Iron Ore Sintering Process by Adding Urea
- The Characteristics and Generating Mechanism of Large Precipitates in Ti-Containing H13 Tool Steel
Articles in the same Issue
- Frontmatter
- Research Articles
- Preparation of Co3O4 Nanostructures via a Hydrothermal- Assisted Thermal Treatment Method by Using of New Precursors
- Transformation Temperatures, Shape Memory and Magnetic Properties of Hafnium Modified Ti-Ta Based High Temperature Shape Memory Alloys
- Modified Sol-Gel Processing of NiCr2O4 Nanoparticles; Structural Analysis and Optical Band Gap
- Effect of Proeutectoid Ferrite Morphology on the Microstructure and Mechanical Properties of Hot Rolled 60Si2MnA Spring Steel
- Uniaxial Properties versus Temperature, Creep and Impact Energy of an Austenitic Steel
- Effect of Rare Earth Cerium Addition on Microstructures and Mechanical Properties of Low Carbon High Manganese Steels
- Geometry and Material Constraint Effects on Creep Crack Growth Behavior in Welded Joints
- Preparation and Properties of ZrO2/Mo Alloys
- The Mechanical Properties of the Mo-0.5Ti and Mo-0.1Zr Alloys at Room Temperature and High Temperature Annealing
- Diffusion Kinetics of Chromium in a Novel Super304H Stainless Steel
- Mechanism of Selective Desulphurization in Iron Ore Sintering Process by Adding Urea
- The Characteristics and Generating Mechanism of Large Precipitates in Ti-Containing H13 Tool Steel