Home Physical Sciences Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags
Article Open Access

Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags

  • Chengchuan Wu EMAIL logo , Guoguang Cheng and Hu Long
Published/Copyright: June 26, 2013
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 33 Issue 1

Received: 2013-2-24
Accepted: 2013-5-10
Published Online: 2013-6-26
Published in Print: 2014-2-1

©2014 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Creep and Fatigue Behavior in Micro-alloyed Steels – A Review
  3. Determination of Flow Stress Using Parametric Linearity Relationship of Arrhenius Power Law
  4. Low-Temperature Sintering of Nanosilver Paste on a Gold Film Surface
  5. Influence of Interfacial Oxides Formed During Dry Sliding Wear of NiCrBSiCFe Plasma Coating on AISI 316 Steel Substrates
  6. Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray
  7. Heat Treatment Study of γ + α2 Ti Aluminides Obtained through Reaction Synthesis and Hot Deformation
  8. The Enhanced Thermoelectric Properties of Ba0.4Co4Sb11.7Te0.3 Prepared by the High-Pressure and High-Temperature Method
  9. Effect of Y and Mg on the Solidification Structure of Fe-36Ni Invar Alloy
  10. Deformation Mechanisms of Tandem Hot Rolled GH4169 Superalloy during Creep
  11. Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags
  12. Microstructural Evolution of Aluminum Alloy 2618 During Homogenization and Its Kinetic Analysis
  13. Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane
https://doi.org/10.1515/htmp-2013-0025
Keywords for this article
Ce2O3; phase; melting temperature; viscosity
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Frontmatter
  2. Creep and Fatigue Behavior in Micro-alloyed Steels – A Review
  3. Determination of Flow Stress Using Parametric Linearity Relationship of Arrhenius Power Law
  4. Low-Temperature Sintering of Nanosilver Paste on a Gold Film Surface
  5. Influence of Interfacial Oxides Formed During Dry Sliding Wear of NiCrBSiCFe Plasma Coating on AISI 316 Steel Substrates
  6. Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray
  7. Heat Treatment Study of γ + α2 Ti Aluminides Obtained through Reaction Synthesis and Hot Deformation
  8. The Enhanced Thermoelectric Properties of Ba0.4Co4Sb11.7Te0.3 Prepared by the High-Pressure and High-Temperature Method
  9. Effect of Y and Mg on the Solidification Structure of Fe-36Ni Invar Alloy
  10. Deformation Mechanisms of Tandem Hot Rolled GH4169 Superalloy during Creep
  11. Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags
  12. Microstructural Evolution of Aluminum Alloy 2618 During Homogenization and Its Kinetic Analysis
  13. Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 12.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2013-0025/html
Scroll to top button