Home Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane
Article Open Access

Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane

  • Akram Feyzi and Khalil Faghihi EMAIL logo
Published/Copyright: August 24, 2013
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 33 Issue 1

Received: 2013-2-11
Accepted: 2013-6-24
Published Online: 2013-8-24
Published in Print: 2014-2-1

©2014 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Creep and Fatigue Behavior in Micro-alloyed Steels – A Review
  3. Determination of Flow Stress Using Parametric Linearity Relationship of Arrhenius Power Law
  4. Low-Temperature Sintering of Nanosilver Paste on a Gold Film Surface
  5. Influence of Interfacial Oxides Formed During Dry Sliding Wear of NiCrBSiCFe Plasma Coating on AISI 316 Steel Substrates
  6. Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray
  7. Heat Treatment Study of γ + α2 Ti Aluminides Obtained through Reaction Synthesis and Hot Deformation
  8. The Enhanced Thermoelectric Properties of Ba0.4Co4Sb11.7Te0.3 Prepared by the High-Pressure and High-Temperature Method
  9. Effect of Y and Mg on the Solidification Structure of Fe-36Ni Invar Alloy
  10. Deformation Mechanisms of Tandem Hot Rolled GH4169 Superalloy during Creep
  11. Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags
  12. Microstructural Evolution of Aluminum Alloy 2618 During Homogenization and Its Kinetic Analysis
  13. Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane
https://doi.org/10.1515/htmp-2013-0016
Keywords for this article
poly(amide-imide); nanocomposite; organoclay; XRD; SEM; TGA; TEM
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Frontmatter
  2. Creep and Fatigue Behavior in Micro-alloyed Steels – A Review
  3. Determination of Flow Stress Using Parametric Linearity Relationship of Arrhenius Power Law
  4. Low-Temperature Sintering of Nanosilver Paste on a Gold Film Surface
  5. Influence of Interfacial Oxides Formed During Dry Sliding Wear of NiCrBSiCFe Plasma Coating on AISI 316 Steel Substrates
  6. Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray
  7. Heat Treatment Study of γ + α2 Ti Aluminides Obtained through Reaction Synthesis and Hot Deformation
  8. The Enhanced Thermoelectric Properties of Ba0.4Co4Sb11.7Te0.3 Prepared by the High-Pressure and High-Temperature Method
  9. Effect of Y and Mg on the Solidification Structure of Fe-36Ni Invar Alloy
  10. Deformation Mechanisms of Tandem Hot Rolled GH4169 Superalloy during Creep
  11. Effect of Ce2O3 and CaO/Al2O3 on the Phase, Melting Temperature and Viscosity of CaO-Al2O3-10 Mass% SiO2 Based Slags
  12. Microstructural Evolution of Aluminum Alloy 2618 During Homogenization and Its Kinetic Analysis
  13. Synthesis and Characterization of New Poly(amide-imide)/organoclay Nanocomposites Derived from N,N′-(4,4′-diphtaloyl)-bis-L-α-aminophenyl Acetic Diacid and 1,2-Bis(4-aminophenoxy)ethane
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 23.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/htmp-2013-0016/html
Scroll to top button