Article
Open Access
TABLE OF CONTENTS
Published/Copyright:
March 8, 2011
Published Online: 2011-03-08
Published in Print: 2009-04
©2011 by Walter de Gruyter GmbH & Co.
Articles in the same Issue
- TABLE OF CONTENTS
- Thermal Plasma Processing for the Production of Pig Iron from Various Sources
- The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
- Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
- Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
- Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
- Copper Removal from Molten Steel with FeS-Na2S Slag
- Structural Analysis of Dispersion Strengthened Materials and Processes
- Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
- Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
- Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
- A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
- High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
- Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- TABLE OF CONTENTS
- Thermal Plasma Processing for the Production of Pig Iron from Various Sources
- The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
- Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
- Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
- Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
- Copper Removal from Molten Steel with FeS-Na2S Slag
- Structural Analysis of Dispersion Strengthened Materials and Processes
- Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
- Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
- Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
- A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
- High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
- Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment
