A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique

Articles in the same Issue

1. TABLE OF CONTENTS
2. Thermal Plasma Processing for the Production of Pig Iron from Various Sources
3. The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
4. Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
5. Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
6. Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
7. Copper Removal from Molten Steel with FeS-Na2S Slag
8. Structural Analysis of Dispersion Strengthened Materials and Processes
9. Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
10. Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
11. Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
12. A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
13. High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
14. Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment