Article Open Access

Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.

  • , , and
Published/Copyright: March 8, 2011
Download Article (PDF)
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 28 Issue 1-2

Published Online: 2011-03-08
Published in Print: 2009-04

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Thermal Plasma Processing for the Production of Pig Iron from Various Sources
  3. The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
  4. Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
  5. Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
  6. Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
  7. Copper Removal from Molten Steel with FeS-Na2S Slag
  8. Structural Analysis of Dispersion Strengthened Materials and Processes
  9. Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
  10. Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
  11. Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
  12. A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
  13. High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
  14. Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment
https://doi.org/10.1515/HTMP.2009.28.1-2.89
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Thermal Plasma Processing for the Production of Pig Iron from Various Sources
  3. The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
  4. Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
  5. Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
  6. Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
  7. Copper Removal from Molten Steel with FeS-Na2S Slag
  8. Structural Analysis of Dispersion Strengthened Materials and Processes
  9. Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
  10. Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
  11. Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
  12. A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
  13. High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
  14. Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/HTMP.2009.28.1-2.89/html
Scroll to top button