Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment

Articles in the same Issue

1. TABLE OF CONTENTS
2. Thermal Plasma Processing for the Production of Pig Iron from Various Sources
3. The Influence of Low-energy Flow of Argon Ions on Topography and Mechanical Properties of Maraging Steel
4. Effect of the Third Element Cr on Filming Behaviors of Fe-xCr-10Al (at.%) Alloys during Initial Stage Oxidation at High Temperatures
5. Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition
6. Dielectrical Properties of a Novel Porcelain Produced from Natural Clay, Waste Glass and Fly Ash
7. Copper Removal from Molten Steel with FeS-Na2S Slag
8. Structural Analysis of Dispersion Strengthened Materials and Processes
9. Investigation of Influence of Pulsed Deuterium Plasma on Surface of Chromium-manganese Steel with Use of Multifractal Parameterization
10. Microstructure and Crystal Chemistry of Eutectic Al2O3/Y3Al5O12 Fibers Modified by the Partial Substitution of Sc2O3 for Al2O3.
11. Thermally Stable and Optically Active New Organosoluble Copolyamides based on N-Phthaloyl-L-glutamic Acid in the Main Chain Synthesis and Characterization
12. A Kinetic Study on LaFeO3-5 Preparation with Solid-state Reaction Technique
13. High Temperature Corrosion Failure of a Secondary Superheater Tube in a Thermal Power Plant Boiler
14. Preparation of TiAl3 Coating on γ-TiAl through Hot-dip Aluminizing and Subsequent Interdiffusion Treatment