A Two-Stage Reduction Process for Silicon Production

Mitsuhiro Tada,; Masahiro Hirasawa,

doi:10.1515/HTMP.2000.19.3-4.281

Startseite A Two-Stage Reduction Process for Silicon Production

Artikel Open Access

A Two-Stage Reduction Process for Silicon Production

Mitsuhiro Tada, und Masahiro Hirasawa,

Veröffentlicht/Copyright: 6. Mai 2011

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift High Temperature Materials and Processes Band 19 Heft 3-4

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Tada,, Mitsuhiro and Hirasawa,, Masahiro. "A Two-Stage Reduction Process for Silicon Production" High Temperature Materials and Processes, vol. 19, no. 3-4, 2000, pp. 281-297. https://doi.org/10.1515/HTMP.2000.19.3-4.281

Tada,, M. & Hirasawa,, M. (2000). A Two-Stage Reduction Process for Silicon Production. High Temperature Materials and Processes, 19(3-4), 281-297. https://doi.org/10.1515/HTMP.2000.19.3-4.281

Tada,, M. and Hirasawa,, M. (2000) A Two-Stage Reduction Process for Silicon Production. High Temperature Materials and Processes, Vol. 19 (Issue 3-4), pp. 281-297. https://doi.org/10.1515/HTMP.2000.19.3-4.281

Tada,, Mitsuhiro and Hirasawa,, Masahiro. "A Two-Stage Reduction Process for Silicon Production" High Temperature Materials and Processes 19, no. 3-4 (2000): 281-297. https://doi.org/10.1515/HTMP.2000.19.3-4.281

Tada, M, Hirasawa, M. A Two-Stage Reduction Process for Silicon Production. High Temperature Materials and Processes. 2000;19(3-4): 281-297. https://doi.org/10.1515/HTMP.2000.19.3-4.281

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 2011-05-06

Published in Print: 2000-03

Artikel in diesem Heft

TABLE OF CONTENTS
Preface: In Memory of Professor Masayasu Ohtani
Equation for Estimating Viscosities of Industrial Mold Fluxes
Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite
Reaction and Transport Phenomena Relevant to the Si Transfer at the Lower Part of the Blast Furnace
Velocity Measurement of Molten Metal Flow at Very High Temperatures
Optimization of the Fe-Rich Fe-Mn-S Ternary Phase Diagram
Thermodynamics of Oxygen in Molten Ti-Al and Zr-Al Alloys
Encapsulation of Phase Change Materials for Storage of High Temperature Waste Heat
Phase Equilibrium Studies in the Systems Cr2O3 - M2O3(M=Fe, Al)-Na2O·xB2O3 in the Flux Growth Method
Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell
Kinetics of Steel Scrap Melting in Molten Fe-C Bath
Thermodynamic Study of Molten Si-Ti Binary Alloys
Formation of Al-Cr-N Films by an Activated Reactive Evaporation (ARE) Method
A Thermodynamic Study of CaCN2
A Two-Stage Reduction Process for Silicon Production

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/HTMP.2000.19.3-4.281

Creative Commons

BY-NC-ND 3.0

Artikel in diesem Heft

TABLE OF CONTENTS
Preface: In Memory of Professor Masayasu Ohtani
Equation for Estimating Viscosities of Industrial Mold Fluxes
Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite
Reaction and Transport Phenomena Relevant to the Si Transfer at the Lower Part of the Blast Furnace
Velocity Measurement of Molten Metal Flow at Very High Temperatures
Optimization of the Fe-Rich Fe-Mn-S Ternary Phase Diagram
Thermodynamics of Oxygen in Molten Ti-Al and Zr-Al Alloys
Encapsulation of Phase Change Materials for Storage of High Temperature Waste Heat
Phase Equilibrium Studies in the Systems Cr2O3 - M2O3(M=Fe, Al)-Na2O·xB2O3 in the Flux Growth Method
Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell
Kinetics of Steel Scrap Melting in Molten Fe-C Bath
Thermodynamic Study of Molten Si-Ti Binary Alloys
Formation of Al-Cr-N Films by an Activated Reactive Evaporation (ARE) Method
A Thermodynamic Study of CaCN2
A Two-Stage Reduction Process for Silicon Production