Home A Thermodynamic Study of CaCN2
Article Open Access

A Thermodynamic Study of CaCN2

  • M. Yamanaka, , Y. Fujita, , A. McLean, and M. Iwase,
Published/Copyright: May 6, 2011
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
High Temperature Materials and Processes
From the journal High Temperature Materials and Processes Volume 19 Issue 3-4

Published Online: 2011-05-06
Published in Print: 2000-03

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Preface: In Memory of Professor Masayasu Ohtani
  3. Equation for Estimating Viscosities of Industrial Mold Fluxes
  4. Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite
  5. Reaction and Transport Phenomena Relevant to the Si Transfer at the Lower Part of the Blast Furnace
  6. Velocity Measurement of Molten Metal Flow at Very High Temperatures
  7. Optimization of the Fe-Rich Fe-Mn-S Ternary Phase Diagram
  8. Thermodynamics of Oxygen in Molten Ti-Al and Zr-Al Alloys
  9. Encapsulation of Phase Change Materials for Storage of High Temperature Waste Heat
  10. Phase Equilibrium Studies in the Systems Cr2O3 - M2O3(M=Fe, Al)-Na2O·xB2O3 in the Flux Growth Method
  11. Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell
  12. Kinetics of Steel Scrap Melting in Molten Fe-C Bath
  13. Thermodynamic Study of Molten Si-Ti Binary Alloys
  14. Formation of Al-Cr-N Films by an Activated Reactive Evaporation (ARE) Method
  15. A Thermodynamic Study of CaCN2
  16. A Two-Stage Reduction Process for Silicon Production
https://doi.org/10.1515/HTMP.2000.19.3-4.275
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Preface: In Memory of Professor Masayasu Ohtani
  3. Equation for Estimating Viscosities of Industrial Mold Fluxes
  4. Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite
  5. Reaction and Transport Phenomena Relevant to the Si Transfer at the Lower Part of the Blast Furnace
  6. Velocity Measurement of Molten Metal Flow at Very High Temperatures
  7. Optimization of the Fe-Rich Fe-Mn-S Ternary Phase Diagram
  8. Thermodynamics of Oxygen in Molten Ti-Al and Zr-Al Alloys
  9. Encapsulation of Phase Change Materials for Storage of High Temperature Waste Heat
  10. Phase Equilibrium Studies in the Systems Cr2O3 - M2O3(M=Fe, Al)-Na2O·xB2O3 in the Flux Growth Method
  11. Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell
  12. Kinetics of Steel Scrap Melting in Molten Fe-C Bath
  13. Thermodynamic Study of Molten Si-Ti Binary Alloys
  14. Formation of Al-Cr-N Films by an Activated Reactive Evaporation (ARE) Method
  15. A Thermodynamic Study of CaCN2
  16. A Two-Stage Reduction Process for Silicon Production
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 14.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HTMP.2000.19.3-4.275/html
Scroll to top button