Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite

Articles in the same Issue

1. TABLE OF CONTENTS
2. Preface: In Memory of Professor Masayasu Ohtani
3. Equation for Estimating Viscosities of Industrial Mold Fluxes
4. Effect of Gas Injection on the Behavior of Slag Foaming With Smelting Reduction of Iron Oxide by Graphite
5. Reaction and Transport Phenomena Relevant to the Si Transfer at the Lower Part of the Blast Furnace
6. Velocity Measurement of Molten Metal Flow at Very High Temperatures
7. Optimization of the Fe-Rich Fe-Mn-S Ternary Phase Diagram
8. Thermodynamics of Oxygen in Molten Ti-Al and Zr-Al Alloys
9. Encapsulation of Phase Change Materials for Storage of High Temperature Waste Heat
10. Phase Equilibrium Studies in the Systems Cr2O3 - M2O3(M=Fe, Al)-Na2O·xB2O3 in the Flux Growth Method
11. Effect of Molten Steel Flow on Nonuniformity of Initially Solidified Shell
12. Kinetics of Steel Scrap Melting in Molten Fe-C Bath
13. Thermodynamic Study of Molten Si-Ti Binary Alloys
14. Formation of Al-Cr-N Films by an Activated Reactive Evaporation (ARE) Method
15. A Thermodynamic Study of CaCN2
16. A Two-Stage Reduction Process for Silicon Production