Home Nanoindentation measurements on infiltrated alumina–aluminide alloys
Article
Licensed
Unlicensed Requires Authentication

Nanoindentation measurements on infiltrated alumina–aluminide alloys

  • T. Scholz EMAIL logo , M. May , M. V. Swain , G. A. Schneider and N. Claussen
Published/Copyright: January 25, 2022
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 94 Issue 7

Abstract

Metal – ceramic composites have been fabricated by reactive infiltration with a laboratory squeeze caster. Two types of these composites are characterised by nanoindentation. While the first one contains Al2O3, TiO2 and Al, the second one contains Al2O3, TiAl3 as the main products and a little Ti5Si3. The phases of the second specimen are formed during infiltration. Hardness and Young’s modulus values in both composites were compared with measurements of the bulk material of each phase. A significant depth dependence of the properties was detected in the composite materials and simulated by a finite element analysis. The measured values agreed well with the simulation.

Keywords: Nanoindentation; Metal – ceramic composites; Reactive infiltration; Finite element analysis
Torben Scholz Technische Universität Hamburg-Harburg Arbeitsbereich Technische Keramik Denickestr. 15, D-21073 Hamburg, Germany Tel.: +49 40 42878 3749 Fax: +49 40 42878 2647

Dedicated to Professor Dr. Dr. h. c. Manfred Rühle on the occasion of his 65th birthday

References

[1] J. Rödel, H. Prielipp, M. Knechtel, N. Claussen: Scripta Metall. Mater 31 (1994) 763.10.1016/0956-716X(94)90224-0Search in Google Scholar

[2] M. Knechtel, H. Prielipp, M. Müllejans, N. Claussen, J. Rödel: Scripta Metall. Mater 31 (1994) 1085.10.1016/0956-716X(94)90531-2Search in Google Scholar

[3] H. Prielipp, M. Knechtl, N. Claussen, S.K. Streiffer, H. Müllejans, M. Rühle, J. Rödel: Mater. Sci. Eng. A 197 (1995) 19.10.1016/0921-5093(94)09771-2Search in Google Scholar

[4] S. Schön, H. Prielipp, R. Janssen, J. Rödel, N. Claussen: J. Am. Ceram. Soc. 77 (1994) 701.10.1111/j.1151-2916.1994.tb05352.xSearch in Google Scholar

[5] K.S. Kumar, G. Bao: Composite Sci. Technol. 52 (1994) 127.10.1016/0266-3538(94)90200-3Search in Google Scholar

[6] J. Rödel, H. Prielipp, N. Claussen, M. Sternizke, K.B. Alexander, P.F. Becher, J.H. Schneibel: Scripta Metall. Mater. 33 (1995) 843.10.1016/0956-716X(95)00301-BSearch in Google Scholar

[7] M.S. Newkirk, A.W. Urquhart, H.R. Zwicker, E. Breval: J. Mater. Res. 1 (1996) 81.10.1557/JMR.1986.0081Search in Google Scholar

[8] N. Claussen, A.W. Urquhart, in: Encyclopedia of Materials and Engineering, R.W. Cahn (Ed.), Supplementary Vol. 2, Pergamon, Oxford (1990).Search in Google Scholar

[9] M.C. Breslin, J. Ringnalda, A.L. Marasco, G.S. Daehn, H.L. Frazier: Ceram. Eng. Sci. 15 (1994) 104.10.1002/9780470314500.ch12Search in Google Scholar

[10] N.A. Travitzky, N. Claussen: J. Eur. Ceram. Soc. 9 (1992) 61.10.1016/0955-2219(92)90078-RSearch in Google Scholar

[11] N. Claussen, P. Beyer, R. Janssen, M. May, T. Selchert: Adv. Eng. Mater. 4 (2002) 117.10.1002/1527-2648(200203)4:3<117::AID-ADEM117>3.0.CO;2-9Search in Google Scholar

[12] N. Claussen, D.E. Garcia, R. Janssen: J. Mater. Res. 11 (1996) 2884.10.1557/JMR.1996.0364Search in Google Scholar

[13] N. Claussen: European Patent No. 97 102335.3.Search in Google Scholar

[14] F. Wagner, D.E. Garcia, A. Krupp, N. Claussen: J. Eur. Ceram. Soc. 19 (1999) 2449.10.1016/S0955-2219(99)00133-8Search in Google Scholar

[15] B. Bhushan, A. Kulkarni, W. Bonin, J.T. Wyrobek: Philos. Mag. A 74 (1996) 1117.10.1080/01418619608239712Search in Google Scholar

[16] P. Beyer, R. Janssen, N. Claussen: Adv. Eng. Mater. 2 (2000) 734.10.1002/1527-2648(200011)2:11<734::AID-ADEM734>3.0.CO;2-MSearch in Google Scholar

[17] W.C. Oliver, G.M. Pharr: J. Mater. Res. 7 (1992) 1564.10.1557/JMR.1992.1564Search in Google Scholar

[18] I.N. Sneddon: Int. J. Eng. Sci. 3 (1965) 47.10.1016/0020-7225(65)90019-4Search in Google Scholar

[19] Hysitron Inc., Triboscope User Manual (1997).Search in Google Scholar

[20] B. Wolf, M.V. Swain, M. Kempf, P. Paufler: J. Mater. Sci. 35 (2000) 723.10.1023/A:1004713502703Search in Google Scholar

[21] K. Ikezawa, T. Maruyama: J. Appl. Phys. 91 (2002) 9689.10.1063/1.1478794Search in Google Scholar

[22] R.W. Waynant, M.N. Ediger: Electro-optics Handbook, McGraw-Hill, New York (2000).Search in Google Scholar

[23] E.R.Weppelmann, J.S. Field, M.V. Swain: J. Mater. Res. 8 (1993) 830.10.1557/JMR.1993.0830Search in Google Scholar

[24] W.D. Nix, H. Gao: J. Mech. Solids 3 (1998) 411.10.1016/S0022-5096(97)00086-0Search in Google Scholar

[25] A. Zerr, M. Kempf, M. Schwarz, E. Kroke, M. Göken, R. Riedel: J. Am. Ceram. Soc. 85 (2002) 86.10.1111/j.1151-2916.2002.tb00044.xSearch in Google Scholar

[26] H.-D. Tietz (Ed.): Technische Keramik, VDI-Verlag, Düsseldorf (1994).10.1007/978-3-642-57902-8Search in Google Scholar

[27] H.J. Höfler, R.S. Averback: Scripta Metall. 24 (1990) 2401.10.1016/0956-716X(90)90101-LSearch in Google Scholar

[28] E. Brunhuber (Ed.): Giesserei Lexikon, Schiele & Schön Verlag, Berlin (1991).Search in Google Scholar

[29] M. Nakamura: J. Mater. Sci. 26 (1991) 2208.10.1007/BF00549190Search in Google Scholar

[30] N. Claussen, G.A. Schneider, N. A. Travitzky: Z. Metallkd. 92 (2001) 834.Search in Google Scholar
Received: 2002-01-07
Published Online: 2022-01-25

© 2003 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. On the origins and mechanisms of the indentation size effect
  6. Nanoindentation testing of gear steels
  7. Nanoscale materials testing under industrially relevant conditions: high-temperature nanoindentation testing
  8. Investigation of the properties of candidate reference materials suited for the calibration of nanoindentation instruments
  9. Approaches of quantifying the entire load–depth curve in terms of hardness
  10. Effect of interphase boundaries on nanoindentation experiments on a Ni-base alloy
  11. Nanoindentation measurements on infiltrated alumina–aluminide alloys
  12. The phase diagram of the Cd–In–Sn system
  13. Experimental study of the liquid/liquid interfacial tension in immiscible Al–Bi system
  14. Solid state synthesis of Al-based amorphous and nanocrystalline Al–Nb–Si and Al–Zr–Si alloys
  15. X-ray diffraction study on the microstructure of an Al–Mg–Sc–Zr alloy deformed by high-pressure torsion
  16. A laser-remelted complex manganese bronze with shape memory
  17. Notifications/Mitteilungen
  18. Personal/Personelles
  19. Books/Bücher
  20. Conferences/Konferenzen
https://doi.org/10.3139/ijmr-2003-0144
Keywords for this article
Nanoindentation; Metal – ceramic composites; Reactive infiltration; Finite element analysis

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. On the origins and mechanisms of the indentation size effect
  6. Nanoindentation testing of gear steels
  7. Nanoscale materials testing under industrially relevant conditions: high-temperature nanoindentation testing
  8. Investigation of the properties of candidate reference materials suited for the calibration of nanoindentation instruments
  9. Approaches of quantifying the entire load–depth curve in terms of hardness
  10. Effect of interphase boundaries on nanoindentation experiments on a Ni-base alloy
  11. Nanoindentation measurements on infiltrated alumina–aluminide alloys
  12. The phase diagram of the Cd–In–Sn system
  13. Experimental study of the liquid/liquid interfacial tension in immiscible Al–Bi system
  14. Solid state synthesis of Al-based amorphous and nanocrystalline Al–Nb–Si and Al–Zr–Si alloys
  15. X-ray diffraction study on the microstructure of an Al–Mg–Sc–Zr alloy deformed by high-pressure torsion
  16. A laser-remelted complex manganese bronze with shape memory
  17. Notifications/Mitteilungen
  18. Personal/Personelles
  19. Books/Bücher
  20. Conferences/Konferenzen
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 27.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2003-0144/html
Scroll to top button